| HPS-TSJ064-134 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. Creep interval is 30 minutes, as printed in the header. | 30°Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ20 H7
+0.021
0Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ3.3 throughConfiguration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ35Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. Creep interval is 30 minutes, as printed in the header. HPS-TSJ064-134 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing30° Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawing30° Drawing bore diameterΦ20 H7
+0.021
0 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ20 H7
+0.021
0 Drawing inner drillΦ3.3 through Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ3.3 完全贯穿 Drawing inner pitch circleΦ35 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ35 Drawing inner step diameterΦ46 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ46 Drawing inner threaded holes12×M4-6H through Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawing12×M4-6H 完全贯穿 Drawing intermediate diameterΦ28 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ28 Drawing outer counterboreΦ6
3.4 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ6
3.4 Drawing outer diameterΦ64
0
-0.05 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ64
0
-0.05 Drawing outer mounting holes16×Φ3.4 through Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawing16×Φ3.4 完全贯穿 Drawing outer pitch circleΦ54 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ54 Drawing overall thickness10 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawing10 Drawing register diameterΦ60 H7
+0.03
0 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawingΦ60 H7
+0.03
0 Drawing shoulder thickness8.5±0.02 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-134 official technical page and embedded mechanical drawing8.5±0.02 Family card dimensionsφ64*10 mm Manufacturer specification Configuration: HPS-TSJ064-134; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. Hypersen Chinese force-sensor family and model summaryHPS-TSJ064-134扭矩传感器量程为134Nm，产品尺寸为φ64*10mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. HPS-TSJ064-134 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ064-134 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ064-134 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. HPS-TSJ064-134 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. HPS-TSJ064-134 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ064-134 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5/RS485 Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ064-134 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5/RS485 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. HPS-TSJ064-134 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ064-134 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sampling frequency1,000 Hz Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. RS485 output only; no analog-channel sample rate is inferred. HPS-TSJ064-134 official technical page and embedded mechanical drawing采样频率（Hz）
1000（RS485） Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ064-134 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. HPS-TSJ064-134 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range134 N·m Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. HPS-TSJ064-134 official technical page and embedded mechanical drawing量程(Nm)
134 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. HPS-TSJ064-134 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ064-134; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The exact-page title and family card identify HPS-TSJ064-134, but the page parameter table literally labels its model HPS-TSJ064-34. Parameter-table applicability remains unresolved; its 134 Nm row is not proof of a distinct 34 product. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ064-134 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ074-182 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 30°Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ20 H7
+0.021
0Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ3.3 throughConfiguration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ32Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ074-182 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing30° Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawing30° Drawing bore diameterΦ20 H7
+0.021
0 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ20 H7
+0.021
0 Drawing inner drillΦ3.3 through Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ3.3 完全贯穿 Drawing inner pitch circleΦ32 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ32 Drawing inner step diameterΦ56 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ56 Drawing inner threaded holes12×M4-6H through Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawing12×M4-6H 完全贯穿 Drawing locating holes4-Φ4
+0.015
0
4 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Stacked tolerance values follow the diameter; the final standalone value is the adjacent depth callout. HPS-TSJ074-182 official technical page and embedded mechanical drawing4-Φ4
+0.015
0
4 Drawing outer counterboreΦ6
3.4 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ6
3.4 Drawing outer diameterΦ74
0
-0.05 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ74
0
-0.05 Drawing outer mounting holes16×Φ3.4 through Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawing16×Φ3.4 完全贯穿 Drawing outer pitch circleΦ62 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ62 Drawing overall thickness10 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawing10 Drawing register diameterΦ70 H7
+0.03
0 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ70 H7
+0.03
0 Drawing secondary pitch circleΦ26±0.05 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawingΦ26±0.05 Drawing shoulder thickness8.5±0.02 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ074-182 official technical page and embedded mechanical drawing8.5±0.02 Family card dimensionsφ74*10 mm Manufacturer specification Configuration: HPS-TSJ074-182; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ074-182扭矩传感器量程为182Nm，产品尺寸为φ74*10mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ074-182 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5/RS485 Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ074-182 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5/RS485 Repeatability≤±0.3 %F.S. Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.3 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ074-182 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sampling frequency1,000 Hz Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. RS485 output only; no analog-channel sample rate is inferred. HPS-TSJ074-182 official technical page and embedded mechanical drawing采样频率（Hz）
1000（RS485） Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ074-182 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range182 N·m Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing量程(Nm)
182 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ074-182 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ074-182; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ074-182 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ180-2700 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 15°Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ66 H7
+0.03
0Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Not published | Φ96Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ180-2700 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing15° Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawing15° Drawing bore diameterΦ66 H7
+0.03
0 Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawingΦ66 H7
+0.03
0 Drawing inner countersinkΦ24.4×90° Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The angle is explicitly 90 degrees; the diameter unit is unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawingΦ24.4×90° Drawing inner mounting holes12×Φ13.5 through Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawing12×Φ13.5通孔 Drawing inner pitch circleΦ96 Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawingΦ96 Drawing inner step diameterΦ144 Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawingΦ144 Drawing outer diameterΦ180 h7
0
-0.04 Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawingΦ180 h7
0
-0.04 Drawing outer drillΦ8.5 through Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawingΦ8.5 完全贯穿 Drawing outer pitch circleΦ164 Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawingΦ164 Drawing outer threaded holes16×M10-6H through Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawing16×M10-6H 完全贯穿 Drawing overall thickness29 Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawing29 Drawing register diameterΦ120 h7
0
-0.035 Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ180-2700 official technical page and embedded mechanical drawingΦ120 h7
0
-0.035 Family card dimensionsφ180*29 mm Manufacturer specification Configuration: HPS-TSJ180-2700; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ180-2700扭矩传感器量程为2700Nm，产品尺寸为φ180*29mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ180-2700 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5 mV/V Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ180-2700 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ180-2700 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ180-2700 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ180-2700 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing供电电压（V）
DC5~15 Torque measurement range2,700 N·m Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing量程(Nm)
2700 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ180-2700 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ180-2700; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ180-2700 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ058-70 | ≤±0.3 %F.S./30 minConfiguration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 45°Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. | Φ10
+0.018
0Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. | Not published | Φ27±0.1Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.3 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ058-70 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.3 Drawing angular spacing45° Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawing45° Drawing blind holeΦ2.5
+0.01
0
4.5 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Stacked tolerance values follow the diameter; the final standalone value is the adjacent depth callout. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ2.5
+0.01
0
4.5 Drawing bore diameterΦ10
+0.018
0 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ10
+0.018
0 Drawing inner pitch circleΦ27±0.1 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ27±0.1 Drawing inner step diameterΦ33.5 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ33.5 Drawing inner threaded holes8-M3 through Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawing8-M3通孔 Drawing left axial step4 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawing4 Drawing locating through holeΦ3
+0.012
0 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ3
+0.012
0 Drawing outer diameterΦ58
0
-0.05 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ58
0
-0.05 Drawing outer mounting holes8-Φ3.5 through Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawing8-Φ3.5通孔 Drawing outer pitch circleΦ49.5 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ49.5 Drawing register diameterΦ43.5
0
-0.025 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ43.5
0
-0.025 Drawing right axial step5 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawing5 Drawing secondary pitch circleΦ31.5 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. HPS-TSJ058-70 official technical page and embedded mechanical drawingΦ31.5 Family card dimensionsφ50*7.5 mm Manufacturer specification Configuration: HPS-TSJ058-70; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. Hypersen Chinese force-sensor family and model summaryHPS-TSJ058-70扭矩传感器量程为70Nm，产品尺寸为φ50*7.5mm，可承受150%过载。 Hysteresis≤±0.3 %F.S. Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.3 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ058-70 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.3 %F.S. Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.3 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.8±3.6/RS485 Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. The printed tolerance exceeds the nominal sensitivity; retained literally, without correction. HPS-TSJ058-70 official technical page and embedded mechanical drawing输出信号(mV/V)
1.8±3.6/RS485 Repeatability≤±0.3 %F.S. Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.3 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ058-70 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sampling rate statusUnspecified Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source lists RS485 but leaves the sampling-rate cell as a dash. HPS-TSJ058-70 official technical page and embedded mechanical drawing采样频率（Hz）
– Sensitivity temperature coefficient≤±0.3 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ058-70 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.3 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range70 N·m Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing量程(Nm)
70 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ058-70 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ058-70 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ068-300 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | Not published | Φ14
+0.018
0Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Not published | Φ24Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ068-300 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing bore diameterΦ14
+0.018
0 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ14
+0.018
0 Drawing cable lengthlength 2m Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Cable length units are explicit in the literal note; other diameters in that note remain unit-unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing长度2m Drawing inner counterboreΦ8
4.6 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ8
4.6 Drawing inner mounting holes8×Φ4.5 through Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawing8×Φ4.5 完全贯穿 Drawing inner pitch circleΦ24 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ24 Drawing inner step diameterΦ40 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ40 Drawing intermediate diameterΦ34 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ34 Drawing locating holes4-Φ4
+0.015
0
4 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Stacked tolerance values follow the diameter; the final standalone value is the adjacent depth callout. HPS-TSJ068-300 official technical page and embedded mechanical drawing4-Φ4
+0.015
0
4 Drawing outer blind holeΦ8
+0.02
0
8 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Stacked tolerance values follow the diameter; the final standalone value is the adjacent depth callout. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ8
+0.02
0
8 Drawing outer diameterΦ68
-0.01
-0.04 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ68
-0.01
-0.04 Drawing outer pitch circleΦ55±0.1 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ55±0.1 Drawing outer threaded holes8-M10 through Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawing8-M10通孔 Drawing overall thickness13 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawing13 Drawing secondary pitch circleΦ28±0.05 Manufacturer specification Configuration: HPS-TSJ068-300; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ068-300 official technical page and embedded mechanical drawingΦ28±0.05 Family card dimensionsφ68*13 mm Manufacturer specification Configuration: HPS-TSJ068-300; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ068-300扭矩传感器量程为300Nm，产品尺寸为φ68*13mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ068-300 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.2 mV/V Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ068-300 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.2 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ068-300 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ068-300 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ068-300 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range300 N·m Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing量程(Nm)
300 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ068-300 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ068-300; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ068-300 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ064-2 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 30°Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ20 H7
+0.021
0Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ3.3 throughConfiguration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ35Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ064-2 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing30° Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawing30° Drawing bore diameterΦ20 H7
+0.021
0 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ20 H7
+0.021
0 Drawing inner drillΦ3.3 through Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ3.3 完全贯穿 Drawing inner pitch circleΦ35 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ35 Drawing inner step diameterΦ46 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ46 Drawing inner threaded holes12×M4-6H through Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawing12×M4-6H 完全贯穿 Drawing intermediate diameterΦ28 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ28 Drawing outer counterboreΦ6
3.4 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ6
3.4 Drawing outer diameterΦ64
0
-0.05 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ64
0
-0.05 Drawing outer mounting holes16×Φ3.4 through Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawing16×Φ3.4 完全贯穿 Drawing outer pitch circleΦ54 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ54 Drawing overall thickness9 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawing9 Drawing register diameterΦ60 H7
+0.03
0 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawingΦ60 H7
+0.03
0 Drawing shoulder thickness7.5±0.02 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ064-2 official technical page and embedded mechanical drawing7.5±0.02 Family card dimensionsφ64*9 mm Manufacturer specification Configuration: HPS-TSJ064-2; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ064-2扭矩传感器量程为2Nm，产品尺寸为φ64*9mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ064-2 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5/RS485 Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ064-2 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5/RS485 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ064-2 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sampling frequency1,000 Hz Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. RS485 output only; no analog-channel sample rate is inferred. HPS-TSJ064-2 official technical page and embedded mechanical drawing采样频率（Hz）
1000（RS485） Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ064-2 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range2 N·m Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing量程(Nm)
2 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ064-2 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ064-2; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ064-2 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ142-850 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 11.25°Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. | Φ35Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. | Φ4.2 throughConfiguration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. | Φ45Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ142-850 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing11.25° Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawing11.25° Drawing auxiliary drillΦ2.05 through Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ2.05 完全贯穿 Drawing auxiliary threaded holes8×M2.5-6H through Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawing8×M2.5-6H 完全贯穿 Drawing bore diameterΦ35 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ35 Drawing inner drillΦ4.2 through Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ4.2 完全贯穿 Drawing inner pitch circleΦ45 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ45 Drawing inner step diameterΦ52 H7
+0.03
0 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ52 H7
+0.03
0 Drawing inner threaded holes16×M5-6H through Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawing16×M5-6H 完全贯穿 Drawing outer counterboreΦ10
6 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ10
6 Drawing outer diameterΦ114
0
-0.05 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ114
0
-0.05 Drawing outer mounting holes16×Φ5.5 through Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawing16×Φ5.5 完全贯穿 Drawing outer pitch circleΦ100 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ100 Drawing overall thickness16 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawing16 Drawing register diameterΦ110 H7
+0.035
0 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ110 H7
+0.035
0 Drawing secondary step diameterΦ88 H7
+0.035
0 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. HPS-TSJ142-850 official technical page and embedded mechanical drawingΦ88 H7
+0.035
0 Family card dimensionsφ142*16 mm Manufacturer specification Configuration: HPS-TSJ142-850; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The family card gives diameter 142 by 16 mm; the page-assigned drawing instead prints outer diameter 114 and thickness 16, without a general unit label. The drawing identity and revision applicability remain unresolved. Hypersen Chinese force-sensor family and model summaryHPS-TSJ142-850扭矩传感器量程为850Nm，产品尺寸为φ142*16mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ142-850 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signalRS485 Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ142-850 official technical page and embedded mechanical drawing输出信号(mV/V)
RS485 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ142-850 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sampling frequency1,000 Hz Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. RS485 output only; no analog-channel sample rate is inferred. HPS-TSJ142-850 official technical page and embedded mechanical drawing采样频率（Hz）
1000(RS485) Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ142-850 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage12 V DC Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing供电电压（V）
DC 12 Torque measurement range850 N·m Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing量程(Nm)
850 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ142-850 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ142-850; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ142-850 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ085-350 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 30°Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ25 H7
+0.021
0Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ3.3 throughConfiguration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ44Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ085-350 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing30° Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawing30° Drawing auxiliary drillΦ2.05 through Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ2.05 完全贯穿 Drawing auxiliary threaded holes6×M2.5-6H through Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawing6×M2.5-6H 完全贯穿 Drawing bore diameterΦ25 H7
+0.021
0 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ25 H7
+0.021
0 Drawing inner drillΦ3.3 through Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ3.3 完全贯穿 Drawing inner pitch circleΦ44 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ44 Drawing inner step diameterΦ38 H7
+0.025
0 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ38 H7
+0.025
0 Drawing inner threaded holes12×M4-6H through Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawing12×M4-6H 完全贯穿 Drawing intermediate diameterΦ54 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ54 Drawing locating holeΦ3
+0.012
0 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ3
+0.012
0 Drawing outer counterboreΦ8
6 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ8
6 Drawing outer diameterΦ85 h7
0
-0.035 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ85 h7
0
-0.035 Drawing outer mounting holes12×Φ4.5 through Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawing12×Φ4.5 完全贯穿 Drawing overall thickness11 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawing11 Drawing recess diameterΦ65.8 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ65.8 Drawing register diameterΦ67 H7
+0.03
0 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ67 H7
+0.03
0 Drawing secondary pitch circleΦ31 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ085-350 official technical page and embedded mechanical drawingΦ31 Family card dimensionsφ85*11 mm Manufacturer specification Configuration: HPS-TSJ085-350; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ085-350扭矩传感器量程为350Nm，产品尺寸为φ85*11mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ085-350 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signalRS485 Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ085-350 official technical page and embedded mechanical drawing输出信号(mV/V)
RS485 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ085-350 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sampling frequency1,000 Hz Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. RS485 output only; no analog-channel sample rate is inferred. HPS-TSJ085-350 official technical page and embedded mechanical drawing采样频率（Hz）
1000（RS485） Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ085-350 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range350 N·m Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing量程(Nm)
350 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ085-350 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ085-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ085-350 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ031-9 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | Not published | Φ7
+0.015
0Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. | Φ2.05 throughConfiguration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. | Φ12Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ031-9 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing bore diameterΦ7
+0.015
0 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ7
+0.015
0 Drawing cable connectorD0801H-5P Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingD0801H-5P Drawing cable lengthlength 80mm Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Cable length units are explicit in the literal note; other diameters in that note remain unit-unspecified. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawing长度80mm Drawing inner drillΦ2.05 through Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ2.05 完全贯穿 Drawing inner pitch circleΦ12 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ12 Drawing inner step diameterΦ17 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ17 Drawing inner threaded holes8×M2.5-6H through Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawing8×M2.5-6H 完全贯穿 Drawing intermediate diameterΦ21 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ21 Drawing outer counterboreΦ4.3
2.5 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ4.3
2.5 Drawing outer diameterΦ31.5
0
-0.04 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ31.5
0
-0.04 Drawing outer mounting holes8×Φ2.4 through Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawing8×Φ2.4 完全贯穿 Drawing outer pitch circleΦ26 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ26 Drawing overall thickness5.5 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawing5.5 Drawing register diameterΦ29.5
+0.025
0 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawingΦ29.5
+0.025
0 Drawing shoulder thickness4.5±0.02 Manufacturer specification Configuration: HPS-TSJ031-9; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. HPS-TSJ031-9 official technical page and embedded mechanical drawing4.5±0.02 Family card dimensionsφ31*5.5 mm Manufacturer specification Configuration: HPS-TSJ031-9; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The family card gives nominal diameter 31 mm while the embedded drawing prints an outer diameter of 31.5 with a tolerance; applicability is not resolved. Hypersen Chinese force-sensor family and model summaryHPS-TSJ031-9扭矩传感器量程为9Nm，产品尺寸为φ31*5.5mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ031-9 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5 mV/V Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ031-9 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ031-9 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ031-9 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ031-9 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range9 N·m Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing量程(Nm)
9 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ031-9 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ031-9; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ031-9 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ102-350 | ≤±0.3 %F.S./30 minConfiguration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 22.5°Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. | Φ25Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. | Not published | Φ39±0.1Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.3 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ102-350 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.3 Drawing angular spacing22.5° Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawing22.5° Drawing auxiliary counterboreΦ6
3.5 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ6
3.5 Drawing auxiliary mounting holes4×Φ3.5 through Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawing4×Φ3.5 完全贯穿 Drawing bore diameterΦ25 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ25 Drawing inner pitch circleΦ39±0.1 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ39±0.1 Drawing inner step diameterΦ44.5
+0.05
+0.02 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ44.5
+0.05
+0.02 Drawing inner threaded holes16-M4 through Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawing16-M4通孔 Drawing intermediate diameterΦ84
0
-0.035 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ84
0
-0.035 Drawing locating holeΦ3
+0.015
0 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ3
+0.015
0 Drawing outer diameterΦ102
0
-0.05 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ102
0
-0.05 Drawing outer mounting holes16-Φ4.5 through Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawing16-Φ4.5通孔 Drawing outer pitch circleΦ94±0.1 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ94±0.1 Drawing overall thickness10.5
0
-0.05 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawing10.5
0
-0.05 Drawing register diameterΦ100
+0.035
0 Manufacturer specification Configuration: HPS-TSJ102-350; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. HPS-TSJ102-350 official technical page and embedded mechanical drawingΦ100
+0.035
0 Family card dimensionsφ102*13 mm Manufacturer specification Configuration: HPS-TSJ102-350; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The family card gives thickness 13 mm, while the exact-page drawing prints 10.5 with a tolerance and no general drawing unit. Source revision applicability remains unresolved. Hypersen Chinese force-sensor family and model summaryHPS-TSJ102-350扭矩传感器量程为350Nm，产品尺寸为φ102*13mm，可承受150%过载。 Hysteresis≤±0.3 %F.S. Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.3 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ102-350 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.3 %F.S. Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.3 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5 mV/V Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ102-350 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ102-350 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ102-350 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ102-350 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range350 N·m Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing量程(Nm)
350 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ102-350 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ102-350; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ102-350 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ042-25 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | Not published | Φ12
+0.018
0Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ2.05 throughConfiguration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ18Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ042-25 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing bore diameterΦ12
+0.018
0 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ12
+0.018
0 Drawing cable connectorD0801H-5P Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingD0801H-5P Drawing cable lengthlength 95mm Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Cable length units are explicit in the literal note; other diameters in that note remain unit-unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing长度95mm Drawing inner drillΦ2.05 through Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ2.05 完全贯穿 Drawing inner pitch circleΦ18 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ18 Drawing inner step diameterΦ23 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ23 Drawing inner threaded holes8×M2.5-6H through Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawing8×M2.5-6H 完全贯穿 Drawing intermediate diameterΦ27 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ27 Drawing outer counterboreΦ4.3
2.5 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ4.3
2.5 Drawing outer diameterΦ42
0
-0.04 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ42
0
-0.04 Drawing outer mounting holes8×Φ2.4 through Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawing8×Φ2.4 完全贯穿 Drawing outer pitch circleΦ34 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ34 Drawing overall thickness6 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawing6 Drawing register diameterΦ40
+0.025
0 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawingΦ40
+0.025
0 Drawing shoulder thickness4.6±0.02 Manufacturer specification Configuration: HPS-TSJ042-25; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ042-25 official technical page and embedded mechanical drawing4.6±0.02 Family card dimensionsφ42*6 mm Manufacturer specification Configuration: HPS-TSJ042-25; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The overview table prints HPS-TSJ042-35, but the current exact product page, its model row and the family card identify HPS-TSJ042-25. No separate 042-35 product is inferred. Hypersen Chinese force-sensor family and model summaryHPS-TSJ042-25扭矩传感器量程为25Nm，产品尺寸为φ42*6mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ042-25 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.5±0.2 mV/V Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ042-25 official technical page and embedded mechanical drawing输出信号(mV/V)
1.5±0.2 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ042-25 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ042-25 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ042-25 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range25 N·m Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing量程(Nm)
25 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ042-25 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ042-25; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ042-25 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ050-20 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 45°Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ14
+0.02
0Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ2.5 throughConfiguration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ19Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ050-20 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing45° Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawing45° Drawing bore diameterΦ14
+0.02
0 Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawingΦ14
+0.02
0 Drawing inner drillΦ2.5 through Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawingΦ2.5 完全贯穿 Drawing inner pitch circleΦ19 Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawingΦ19 Drawing inner step diameterΦ24 Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawingΦ24 Drawing inner threaded holes8×M3-6H through Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawing8×M3-6H 完全贯穿 Drawing intermediate diameterΦ38 Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawingΦ38 Drawing outer counterboreΦ4.3
2.3 Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ050-20 official technical page and embedded mechanical drawingΦ4.3
2.3 Drawing outer diameterΦ50 h7
0
-0.025 Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawingΦ50 h7
0
-0.025 Drawing outer mounting holes12×Φ2.4 through Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawing12×Φ2.4 完全贯穿 Drawing outer pitch circleΦ44 Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawingΦ44 Drawing overall thickness7±0.02 Manufacturer specification Configuration: HPS-TSJ050-20; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ050-20 official technical page and embedded mechanical drawing7±0.02 Family card dimensionsφ50*7 mm Manufacturer specification Configuration: HPS-TSJ050-20; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ050-20扭矩传感器量程为20Nm，
产品尺寸为φ50*7mm，
可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ050-20 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal0.8±1.6 mV/V Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. The printed tolerance exceeds the nominal sensitivity; retained literally, without correction. HPS-TSJ050-20 official technical page and embedded mechanical drawing输出信号(mV/V)
0.8±1.6 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ050-20 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ050-20 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ050-20 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range20 N·m Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing量程(Nm)
20 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ050-20 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ050-20; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ050-20 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ175-1500 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | Not published | Φ35Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Not published | Φ80±0.1Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ175-1500 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing auxiliary mounting holes6-Φ3.2 through Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawing6-Φ3.2通孔 Drawing auxiliary pitch circleΦ42 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawingΦ42 Drawing bore diameterΦ35 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawingΦ35 Drawing cable lengthcable φ3*2 m Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Cable length units are explicit in the literal note; other diameters in that note remain unit-unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing线长φ3*2米 Drawing inner pitch circleΦ80±0.1 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawingΦ80±0.1 Drawing inner step diameterΦ48
+0.03
0 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawingΦ48
+0.03
0 Drawing inner threaded holes16-M8 depth 16 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawing16-M8深16 Drawing outer diameterΦ175
0
-0.1 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawingΦ175
0
-0.1 Drawing outer mounting holes12-Φ9 through Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawing12-Φ9通孔 Drawing outer pitch circleΦ154±0.1 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawingΦ154±0.1 Drawing overall thickness40±0.05 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawing40±0.05 Drawing register diameterΦ130
+0.05
0 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawingΦ130
+0.05
0 Drawing secondary step diameterΦ90 Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ175-1500 official technical page and embedded mechanical drawingΦ90 Family card dimensionsφ175*40 mm Manufacturer specification Configuration: HPS-TSJ175-1500; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The family card heading and exact-page model row identify HPS-TSJ175-1500; the card body instead prints HPS-TSJ172-1500. No separate 172 product is inferred. Hypersen Chinese force-sensor family and model summaryHPS-TSJ172-1500扭矩传感器量程为1500Nm，产品尺寸为φ175*40mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ175-1500 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5 mV/V Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ175-1500 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ175-1500 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ175-1500 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ175-1500 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing供电电压（V）
DC5~15 Torque measurement range1,500 N·m Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing量程(Nm)
1500 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ175-1500 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ175-1500; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ175-1500 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ114-848 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 22.5°Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ48 H7
+0.025
0Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Not published | Φ72Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ114-848 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing22.5° Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawing22.5° Drawing bore diameterΦ48 H7
+0.025
0 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawingΦ48 H7
+0.025
0 Drawing inner pitch circleΦ72 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawingΦ72 Drawing inner step diameterΦ88 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawingΦ88 Drawing inner threaded holes16-M6 through Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawing16-M6通孔 Drawing intermediate diameterΦ60 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawingΦ60 Drawing outer counterboreΦ10
5.7 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ114-848 official technical page and embedded mechanical drawingΦ10
5.7 Drawing outer diameterΦ114
0
-0.05 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawingΦ114
0
-0.05 Drawing outer mounting holes16×Φ5.5 through Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawing16×Φ5.5 完全贯穿 Drawing outer pitch circleΦ100 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawingΦ100 Drawing overall thickness12 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawing12 Drawing register diameterΦ110 H7
+0.035
0 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawingΦ110 H7
+0.035
0 Drawing shoulder thickness10±0.02 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ114-848 official technical page and embedded mechanical drawing10±0.02 Family card dimensionsφ114*12 mm Manufacturer specification Configuration: HPS-TSJ114-848; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ114-848扭矩传感器量程为848Nm，产品尺寸为φ114*12mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ114-848 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5/RS485 Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ114-848 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5/RS485 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ114-848 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sampling frequency1,000 Hz Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. RS485 output only; no analog-channel sample rate is inferred. HPS-TSJ114-848 official technical page and embedded mechanical drawing采样频率（Hz）
1000(RS485) Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ114-848 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range848 N·m Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing量程(Nm)
848 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ114-848 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ114-848; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ114-848 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ060-200 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | Not published | Φ12
+0.018
0Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Not published | Φ22Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ060-200 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing bore diameterΦ12
+0.018
0 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ12
+0.018
0 Drawing cable lengthlength 2m Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Cable length units are explicit in the literal note; other diameters in that note remain unit-unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing长度2m Drawing inner counterboreΦ8
4.6 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ8
4.6 Drawing inner mounting holes8×Φ4.5 through Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawing8×Φ4.5 完全贯穿 Drawing inner pitch circleΦ22 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ22 Drawing inner step diameterΦ38 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ38 Drawing intermediate diameterΦ31 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ31 Drawing locating holes4-Φ4
+0.015
0
4 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Stacked tolerance values follow the diameter; the final standalone value is the adjacent depth callout. HPS-TSJ060-200 official technical page and embedded mechanical drawing4-Φ4
+0.015
0
4 Drawing outer blind holeΦ6
+0.015
0
6 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Stacked tolerance values follow the diameter; the final standalone value is the adjacent depth callout. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ6
+0.015
0
6 Drawing outer diameterΦ60
-0.01
-0.04 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ60
-0.01
-0.04 Drawing outer pitch circleΦ48±0.1 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ48±0.1 Drawing outer threaded holes8-M8 through Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawing8-M8通孔 Drawing overall thickness13 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawing13 Drawing secondary pitch circleΦ26±0.05 Manufacturer specification Configuration: HPS-TSJ060-200; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ060-200 official technical page and embedded mechanical drawingΦ26±0.05 Family card dimensionsφ60*13 mm Manufacturer specification Configuration: HPS-TSJ060-200; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ060-200扭矩传感器量程为200Nm，产品尺寸为φ60*13mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ060-200 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.2 mV/V Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ060-200 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.2 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ060-200 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ060-200 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ060-200 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range200 N·m Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing量程(Nm)
200 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ060-200 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ060-200; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ060-200 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ088-351 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 30°Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ35 H7
+0.025
0Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ4.2 throughConfiguration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Φ54Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ088-351 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing30° Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawing30° Drawing bore diameterΦ35 H7
+0.025
0 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ35 H7
+0.025
0 Drawing inner drillΦ4.2 through Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ4.2 完全贯穿 Drawing inner pitch circleΦ54 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ54 Drawing inner step diameterΦ66 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ66 Drawing inner threaded holes12×M5-6H through Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawing12×M5-6H 完全贯穿 Drawing intermediate diameterΦ44 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ44 Drawing outer counterboreΦ8
4.6 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ8
4.6 Drawing outer diameterΦ88
0
-0.05 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ88
0
-0.05 Drawing outer mounting holes12×Φ4.5 through Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawing12×Φ4.5 完全贯穿 Drawing outer pitch circleΦ77 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ77 Drawing overall thickness10 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawing10 Drawing register diameterΦ85 H7
+0.04
0 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawingΦ85 H7
+0.04
0 Drawing shoulder thickness8.5±0.02 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. HPS-TSJ088-351 official technical page and embedded mechanical drawing8.5±0.02 Family card dimensionsφ88*10 mm Manufacturer specification Configuration: HPS-TSJ088-351; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. Hypersen Chinese force-sensor family and model summaryHPS-TSJ088-351扭矩传感器量程为351Nm，产品尺寸为φ88*10mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ088-351 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.0±0.5/RS485 Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. HPS-TSJ088-351 official technical page and embedded mechanical drawing输出信号(mV/V)
1.0±0.5/RS485 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ088-351 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sampling frequency1,000 Hz Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. RS485 output only; no analog-channel sample rate is inferred. HPS-TSJ088-351 official technical page and embedded mechanical drawing采样频率（Hz）
1000（RS485） Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ088-351 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range351 N·m Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing量程(Nm)
351 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ088-351 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ088-351; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ088-351 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
| HPS-TSJ053-66 | ≤±0.5 %F.S./30 minConfiguration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. | 45°Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. | Φ12 H7
+0.018
0Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. | Φ3.3 throughConfiguration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. | Φ20Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Creep 30 minutes≤±0.5 %F.S./30 min Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header. HPS-TSJ053-66 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5 Drawing angular spacing45° Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawing45° Drawing bore diameterΦ12 H7
+0.018
0 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ12 H7
+0.018
0 Drawing inner drillΦ3.3 through Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ3.3 完全贯穿 Drawing inner pitch circleΦ20 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ20 Drawing inner step diameterΦ26 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ26 Drawing inner threaded holes8×M4-6H through Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawing8×M4-6H 完全贯穿 Drawing intermediate diameterΦ37 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ37 Drawing outer counterboreΦ6
3 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ6
3 Drawing outer diameterΦ53
0
-0.046 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ53
0
-0.046 Drawing outer mounting holes8×Φ3.4 through Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawing8×Φ3.4 完全贯穿 Drawing outer pitch circleΦ44 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ44 Drawing overall thickness7.5 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawing7.5 Drawing register diameterΦ50 H7
+0.03
0 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ50 H7
+0.03
0 Drawing shoulder thickness6±0.02 Manufacturer specification Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawing6±0.02 Family card dimensionsφ50*7.5 mm Manufacturer specification Configuration: HPS-TSJ053-66; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. Hypersen Chinese force-sensor family and model summaryHPS-TSJ053-66扭矩传感器量程为66Nm，产品尺寸为φ50*7.5mm，可承受150%过载。 Hysteresis≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5 Input resistance700±5 Ω Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Insulation resistance≥5000 MΩ Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω. HPS-TSJ053-66 official technical page and embedded mechanical drawing绝缘电阻（Ω）
≥5000M(50VDC) Nonlinearity≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5 Operating temperature-20~80 °C Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing工作温度（℃）
-20~80 Output resistance750±50 Ω Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing输出/输入电阻（Ω）
750±50/700±5 Output signal1.5±0.2 mV/V Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved. HPS-TSJ053-66 official technical page and embedded mechanical drawing输出信号(mV/V)
1.5±0.2 Output signal1.5±0.5 mV/V Manufacturer specification Configuration: HPS-TSJ053-66; family overview table; The exact-page table instead prints 1.5±0.2 mV/V; revision applicability is unresolved. Hypersen Chinese force-sensor family and model summaryHPS-TSJ053-66
66
1.5±0.5 Output typeAnalog Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated. HPS-TSJ053-66 official technical page and embedded mechanical drawing–模拟量输出 Repeatability≤±0.5 %F.S. Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5 Safe overload source limit≤150 %F.S. Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating. HPS-TSJ053-66 official technical page and embedded mechanical drawing安全过载（%F.S.）
≤150 Sensitivity temperature coefficient≤±0.5 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ053-66 official technical page and embedded mechanical drawing灵敏度温度系数（(
%F.S./10℃
)）
≤±0.5 Supply voltage5~15 V DC Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing供电电压（V）
DC 5~15 Torque measurement range66 N·m Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing量程(Nm)
66 Zero output≤±1 %F.S. Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. HPS-TSJ053-66 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1 Zero temperature coefficient≤±0.1 %F.S./10 °C Manufacturer specification Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed. HPS-TSJ053-66 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1 |
|---|
