Global RoboticsProduct family
10 variants · Varies by measurement range, size
Manufacturer-defined Hypersen HPS-FT six-axis force/torque sensors family, with size and configuration details recorded on each individual model.
Values retain their source conditions and claim stage. A missing value means it has not been published in this catalogue.
| Variant / model | Adc resolution | Approximate mass | Cable diameter callout | Communication interface options | Crosstalk upper limit | Details & evidence |
|---|---|---|---|---|---|---|
| HPS-FT120 | 24 bitConfiguration: HPS-FT120; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 1,450 gConfiguration: HPS-FT120; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Diameter 7Configuration: HPS-FT120; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT120; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT120; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT120 official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass1,450 g Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT120 official product page and parameter table ±4000N（Fz） | Weight*4 | ≈1450g Cable diameter calloutDiameter 7 Manufacturer specification Configuration: HPS-FT120; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT120 Dimensional Drawing ⌀7Cable Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT120 official product page and parameter table Measuring range | ±3000N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT120 official product page and parameter table Non-linearity | ＜2(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT120 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Dimension labeled diameter126 mm Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Middle dimension explicitly labeled diameter; full published size notation is preserved separately. HPS-FT120 official product page and parameter table ±150Nm（Mxy） | Size | 142×126(diameter)x50mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT120 official product page and parameter table Resolution | 0.02(%FS)（Fxy） | External connector type | Cold-pressed terminal First published overall dimension142 mm Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; First value in the printed three-value size notation; axis designation is not stated. HPS-FT120 official product page and parameter table ±150Nm（Mxy） | Size | 142×126(diameter)x50mm Front locating-hole callouts2 x diameter 6 (+0.012/0), depth 5; center diameter 16 (+0.018/0), depth 6 Manufacturer specification Configuration: HPS-FT120; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT120 Dimensional Drawing 2 x ⌀6 +0.012/0 ↧5; ⌀16 +0.018/0 ↧6 Front threaded mounting callout6 x M8 depth 7; evenly distributed Manufacturer specification Configuration: HPS-FT120; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT120 Dimensional Drawing 6 x M8 ↧7 (Evenly distributed) Front through-hole callout4 x diameter 6.6 through hole; evenly distributed Manufacturer specification Configuration: HPS-FT120; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT120 Dimensional Drawing 4 x ⌀6.6through hole (Evenly distributed) Introduction data output rate2,000 Hz Manufacturer specification Configuration: HPS-FT120; product introduction; Manufacturer source discrepancy: introduction states 2000 Hz, while parameter table states maximum 2700 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT120 official product page and parameter table 2000Hz output data rate Maximum data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2000 Hz output data rate, while this table states 2700 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT120 official product page and parameter table 0.02(%FS)（Fz） | Data output rate*2 | 2700Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; DC supply range upper endpoint. HPS-FT120 official product page and parameter table ±150Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT120 official product page and parameter table Model | HPS-FT120 | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT120 official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy3,000 N Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Symmetric signed range: ±3000 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT120 official product page and parameter table Measuring range | ±3000N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz4,000 N Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Symmetric signed range: ±4000 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT120 official product page and parameter table ±4000N（Fz） | Weight*4 | ≈1450g Measurement range magnitude mx and my150 N·m Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Symmetric signed range: ±150 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT120 official product page and parameter table ±150Nm（Mxy） | Size | 142×126(diameter)x50mm Measurement range magnitude mz150 N·m Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Symmetric signed range: ±150 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT120 official product page and parameter table ±150Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; DC supply range lower endpoint. HPS-FT120 official product page and parameter table ±150Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT120 official product page and parameter table Model | HPS-FT120 | Working temperature | -10~+55℃ Non-linearity upper limit2 %FS Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT120 official product page and parameter table Non-linearity | ＜2(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT120 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption0.5 W Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT120 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 0.5W Published size notation142×126(diameter)x50mm Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT120 official product page and parameter table ±150Nm（Mxy） | Size | 142×126(diameter)x50mm Rear locating-hole callouts2 x diameter 5 (+0.012/0), depth 5; center diameter 16 (+0.018/0), depth 2.5 Manufacturer specification Configuration: HPS-FT120; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT120 Dimensional Drawing 2 x ⌀5 +0.012/0 ↧5; ⌀16 +0.018/0 ↧2.5 Rear threaded mounting callout6 x M8 depth 6; evenly distributed Manufacturer specification Configuration: HPS-FT120; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT120 Dimensional Drawing 6 x M8 ↧6 (Evenly distributed) Resolution fx and fy0.02 %FS Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT120 official product page and parameter table Resolution | 0.02(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.02 %FS Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT120 official product page and parameter table 0.02(%FS)（Fz） | Data output rate*2 | 2700Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT120 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT120 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT120 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT120 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 0.5W Third published dimension50 mm Manufacturer specification Configuration: HPS-FT120; exact-model parameter table; Third value in the printed three-value size notation; axis designation is not stated. HPS-FT120 official product page and parameter table ±150Nm（Mxy） | Size | 142×126(diameter)x50mm |
| HPS-FT090 | 24 bitConfiguration: HPS-FT090; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 686 gConfiguration: HPS-FT090; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Not published | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT090; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT090; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT090 official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass686 g Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT090 official product page and parameter table ±5000N（Fz） | Weight*4 | ≈686g Axial drawing callouts32 including protruding screws; 26 body span; measurement-origin offset 14.35 Manufacturer specification Configuration: HPS-FT090; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT090 exact-model page embedded drawing 32; 26; 14.35 Axial size32 mm Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; First dimension in the manufacturer axial-size × diameter notation; exact end details require the drawing. HPS-FT090 official product page and parameter table ±100Nm（Mxy） | Size | 32×90(diameter)mm Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT090 official product page and parameter table Measuring range | ±3500N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT090 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT090 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Diameter90 mm Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Dimension explicitly labeled diameter in the exact-model parameter table. HPS-FT090 official product page and parameter table ±100Nm（Mxy） | Size | 32×90(diameter)mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT090 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Front locating-hole callout2 x diameter 5, depth 6 Manufacturer specification Configuration: HPS-FT090; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT090 exact-model page embedded drawing 2 x ⌀5 ↧6 Front threaded mounting callout6 x M4-6H, depth 6; diameter 3.3 drill depth 7.2 Manufacturer specification Configuration: HPS-FT090; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT090 exact-model page embedded drawing 6 x M4 - 6H ↧6; ⌀3.3 ↧7.2 Maximum data output rate2,000 Hz Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. HPS-FT090 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2000Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; DC supply range upper endpoint. HPS-FT090 official product page and parameter table ±100Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature80 °C Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT090 official product page and parameter table Model | HPS-FT090 | Working temperature | -20~+80℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT090 official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy3,500 N Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Symmetric signed range: ±3500 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT090 official product page and parameter table Measuring range | ±3500N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz5,000 N Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Symmetric signed range: ±5000 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT090 official product page and parameter table ±5000N（Fz） | Weight*4 | ≈686g Measurement range magnitude mx and my100 N·m Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Symmetric signed range: ±100 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT090 official product page and parameter table ±100Nm（Mxy） | Size | 32×90(diameter)mm Measurement range magnitude mz100 N·m Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Symmetric signed range: ±100 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT090 official product page and parameter table ±100Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; DC supply range lower endpoint. HPS-FT090 official product page and parameter table ±100Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-20 °C Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT090 official product page and parameter table Model | HPS-FT090 | Working temperature | -20~+80℃ Non-linearity upper limit0.5 %FS Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT090 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT090 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption1.5 W Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT090 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W Published size notation32×90(diameter)mm Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT090 official product page and parameter table ±100Nm（Mxy） | Size | 32×90(diameter)mm Rear locating-hole callout2 x diameter 5 (+0.03/0), depth 4 Manufacturer specification Configuration: HPS-FT090; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT090 exact-model page embedded drawing 2 x ⌀5 +0.03/0 ↧4 Resolution fx and fy0.01 %FS Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT090 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.01 %FS Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT090 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2000Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT090 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT090 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT090 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT090; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT090 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W |
| HPS-FT060E | 24 bitConfiguration: HPS-FT060E; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 255 gConfiguration: HPS-FT060E; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Diameter 3Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT060E; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT060E; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT060E official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass255 g Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT060E official product page and parameter table ±800N（Fz） | Weight*4 | ≈255g Cable diameter calloutDiameter 3 Manufacturer specification Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing ⌀3 Cable Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT060E official product page and parameter table Measuring range | ±600N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT060E official product page and parameter table Non-linearity | ＜1.25(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT060E official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Dimension labeled diameter78 mm Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Middle dimension explicitly labeled diameter; full published size notation is preserved separately. HPS-FT060E official product page and parameter table ±15Nm（Mxy） | Size | 87×78(diameter)x28.5mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT060E official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal First published overall dimension87 mm Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; First value in the printed three-value size notation; axis designation is not stated. HPS-FT060E official product page and parameter table ±15Nm（Mxy） | Size | 87×78(diameter)x28.5mm Front locating-hole callouts2 x diameter 4 (+0.012/0), depth 4; center diameter 10 (+0.015/0), depth 3 Manufacturer specification Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 2 x ⌀4 +0.012/0 ↧4; ⌀10 +0.015/0 ↧3 Front threaded mounting callout6 x M4 depth 6; evenly distributed Manufacturer specification Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 6 x M4 ↧6 (Evenly distributed) Front through-hole callout4 x diameter 5.3 through hole; evenly distributed Manufacturer specification Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 4 x ⌀5.3through hole (Evenly distributed) Introduction data output rate2,000 Hz Manufacturer specification Configuration: HPS-FT060E; product introduction; Manufacturer source discrepancy: introduction states 2000 Hz, while parameter table states maximum 2700 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT060E official product page and parameter table 2000Hz output data rate Maximum data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2000 Hz output data rate, while this table states 2700 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT060E official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2700Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; DC supply range upper endpoint. HPS-FT060E official product page and parameter table ±15Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT060E official product page and parameter table Model | HPS-FT060E | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT060E official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy600 N Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Symmetric signed range: ±600 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT060E official product page and parameter table Measuring range | ±600N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz800 N Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Symmetric signed range: ±800 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT060E official product page and parameter table ±800N（Fz） | Weight*4 | ≈255g Measurement range magnitude mx and my15 N·m Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Symmetric signed range: ±15 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT060E official product page and parameter table ±15Nm（Mxy） | Size | 87×78(diameter)x28.5mm Measurement range magnitude mz15 N·m Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Symmetric signed range: ±15 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT060E official product page and parameter table ±15Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; DC supply range lower endpoint. HPS-FT060E official product page and parameter table ±15Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT060E official product page and parameter table Model | HPS-FT060E | Working temperature | -10~+55℃ Non-linearity upper limit1.25 %FS Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT060E official product page and parameter table Non-linearity | ＜1.25(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT060E official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption0.5 W Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT060E official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 0.5W Published size notation87×78(diameter)x28.5mm Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT060E official product page and parameter table ±15Nm（Mxy） | Size | 87×78(diameter)x28.5mm Rear locating-hole callouts2 x diameter 4 (+0.012/0), depth 4; center diameter 10 (+0.015/0), depth 2 Manufacturer specification Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 2 x ⌀4 +0.012/0 ↧4; ⌀10 +0.015/0 ↧2 Rear threaded mounting callout4 x M5 depth 5; evenly distributed Manufacturer specification Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 4 x M5 ↧5 (Evenly distributed) Resolution fx and fy0.01 %FS Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT060E official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.01 %FS Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT060E official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2700Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT060E official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT060E official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT060E official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT060E official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 0.5W Third published dimension28.5 mm Manufacturer specification Configuration: HPS-FT060E; exact-model parameter table; Third value in the printed three-value size notation; axis designation is not stated. HPS-FT060E official product page and parameter table ±15Nm（Mxy） | Size | 87×78(diameter)x28.5mm |
| HPS-FT025 | 24 bitConfiguration: HPS-FT025; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 28 gConfiguration: HPS-FT025; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Diameter 4.6Configuration: HPS-FT025; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT025; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT025; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT025 official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass28 g Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT025 official product page and parameter table ±200N（Fz） | Weight*4 | ≈28g Axial size23 mm Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; First dimension in the manufacturer axial-size × diameter notation; exact end details require the drawing. HPS-FT025 official product page and parameter table ±4Nm（Mxy） | Size | 23×26.2(diameter)mm Cable diameter calloutDiameter 4.6 Manufacturer specification Configuration: HPS-FT025; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT025 Dimensional Drawing ⌀4.6Cable Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT025 official product page and parameter table Measuring range | ±150N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT025 official product page and parameter table Non-linearity | ＜1.25(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT025 official product page and parameter table 0.025(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Diameter26.2 mm Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Dimension explicitly labeled diameter in the exact-model parameter table. HPS-FT025 official product page and parameter table ±4Nm（Mxy） | Size | 23×26.2(diameter)mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT025 official product page and parameter table Resolution | 0.02(%FS)（Fxy） | External connector type | Cold-pressed terminal Force measurement origin offset callout8.25 from indicated rear plane Manufacturer specification Configuration: HPS-FT025; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT025 Dimensional Drawing Force measurement origin; 8.25 Front locating-hole callouts3 x diameter 3 (+0.012/0), depth 3.3, evenly distributed; center diameter 3 (+0.012/0), depth 2 Manufacturer specification Configuration: HPS-FT025; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT025 Dimensional Drawing 3 x ⌀3 +0.012/0 ↧3.3 (Evenly distributed); ⌀3 +0.012/0 ↧2 Front threaded mounting callout3 x M3 depth 4; evenly distributed Manufacturer specification Configuration: HPS-FT025; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT025 Dimensional Drawing 3 x M3 ↧4 (Evenly distributed) Introduction data output rate2,000 Hz Manufacturer specification Configuration: HPS-FT025; product introduction; Manufacturer source discrepancy: introduction states 2000 Hz, while parameter table states maximum 2700 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT025 official product page and parameter table 2000Hz output data rate Maximum data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2000 Hz output data rate, while this table states 2700 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT025 official product page and parameter table 0.02(%FS)（Fz） | Data output rate*2 | 2700Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; DC supply range upper endpoint. HPS-FT025 official product page and parameter table ±4Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT025 official product page and parameter table Model | HPS-FT025 | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT025 official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy150 N Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Symmetric signed range: ±150 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT025 official product page and parameter table Measuring range | ±150N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz200 N Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Symmetric signed range: ±200 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT025 official product page and parameter table ±200N（Fz） | Weight*4 | ≈28g Measurement range magnitude mx and my4 N·m Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Symmetric signed range: ±4 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT025 official product page and parameter table ±4Nm（Mxy） | Size | 23×26.2(diameter)mm Measurement range magnitude mz4 N·m Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Symmetric signed range: ±4 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT025 official product page and parameter table ±4Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; DC supply range lower endpoint. HPS-FT025 official product page and parameter table ±4Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT025 official product page and parameter table Model | HPS-FT025 | Working temperature | -10~+55℃ Non-linearity upper limit1.25 %FS Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. Manufacturer source discrepancy: the Chinese family summary states <1%FS for this exact model, whereas this exact-model page states <1.25%FS. No revision/condition reconciliation is available. HPS-FT025 official product page and parameter table Non-linearity | ＜1.25(%FS) | Crosstalk | <2(%FS) Non-linearity upper limit1 %FS Manufacturer specification Configuration: HPS-FT025; Chinese family summary; Strict upper limit (<). Manufacturer source discrepancy: this model row states <1%FS, while the English exact-model page states <1.25%FS. Generation/test-condition mapping is unresolved; retained as a separate manufacturer claim. Hypersen Chinese force-sensor family and model summary HPS-FT025 | ±150N(Fxy） | ±200N(Fz) | ±4Nm(Mxy) | ±4Nm(Mz) | ＜1(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT025 official product page and parameter table 0.025(%FS)（Mz） | Overload capacity*3 | 350% Power consumption0.5 W Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT025 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 0.5W Published size notation23×26.2(diameter)mm Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT025 official product page and parameter table ±4Nm（Mxy） | Size | 23×26.2(diameter)mm Rear locating-hole callouts2 x diameter 3 (+0.012/0), depth 4; center diameter 6 (+0.012/0), depth 2 Manufacturer specification Configuration: HPS-FT025; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT025 Dimensional Drawing 2 x ⌀3 +0.012/0 ↧4 (Evenly distributed); ⌀6 +0.012/0 ↧2 Rear threaded mounting callout3 x M3 depth 6; evenly distributed Manufacturer specification Configuration: HPS-FT025; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. HPS-FT025 Dimensional Drawing 3 x M3 ↧6 (Evenly distributed) Resolution fx and fy0.02 %FS Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT025 official product page and parameter table Resolution | 0.02(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.02 %FS Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT025 official product page and parameter table 0.02(%FS)（Fz） | Data output rate*2 | 2700Hz(max) Resolution mx and my0.025 %FS Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT025 official product page and parameter table 0.025(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.025 %FS Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT025 official product page and parameter table 0.025(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT025 official product page and parameter table 0.025(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT025; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT025 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 0.5W |
| HPS-FT080-80 | 24 bitConfiguration: HPS-FT080-80; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 686 gConfiguration: HPS-FT080-80; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Not published | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT080-80; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT080-80; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT080-80 official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass686 g Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT080-80 official product page and parameter table ±3200N（Fz） | Weight*4 | ≈686g Axial size26 mm Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; First dimension in the manufacturer axial-size × diameter notation; exact end details require the drawing. HPS-FT080-80 official product page and parameter table ±80Nm（Mxy） | Size | 26×80(diameter)mm Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT080-80 official product page and parameter table Measuring range | ±2400N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT080-80 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT080-80 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Diameter80 mm Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Dimension explicitly labeled diameter in the exact-model parameter table. HPS-FT080-80 official product page and parameter table ±80Nm（Mxy） | Size | 26×80(diameter)mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT080-80 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Introduction data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT080-80; product introduction; Manufacturer source discrepancy: introduction states 2700 Hz, while parameter table states maximum 2200 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT080-80 official product page and parameter table 2700Hz output data rate Maximum data output rate2,200 Hz Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2700 Hz output data rate, while this table states 2200 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT080-80 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; DC supply range upper endpoint. HPS-FT080-80 official product page and parameter table ±80Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT080-80 official product page and parameter table Model | HPS-FT080-80 | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT080-80 official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy2,400 N Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Symmetric signed range: ±2400 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-80 official product page and parameter table Measuring range | ±2400N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz3,200 N Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Symmetric signed range: ±3200 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-80 official product page and parameter table ±3200N（Fz） | Weight*4 | ≈686g Measurement range magnitude mx and my80 N·m Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Symmetric signed range: ±80 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-80 official product page and parameter table ±80Nm（Mxy） | Size | 26×80(diameter)mm Measurement range magnitude mz80 N·m Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Symmetric signed range: ±80 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-80 official product page and parameter table ±80Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; DC supply range lower endpoint. HPS-FT080-80 official product page and parameter table ±80Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT080-80 official product page and parameter table Model | HPS-FT080-80 | Working temperature | -10~+55℃ Non-linearity upper limit0.5 %FS Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT080-80 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT080-80 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption1.5 W Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT080-80 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W Published size notation26×80(diameter)mm Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT080-80 official product page and parameter table ±80Nm（Mxy） | Size | 26×80(diameter)mm Resolution fx and fy0.01 %FS Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT080-80 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.01 %FS Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT080-80 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT080-80 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT080-80 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT080-80 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT080-80; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT080-80 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W |
| HPS-FT080-40 | 24 bitConfiguration: HPS-FT080-40; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 478 gConfiguration: HPS-FT080-40; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Not published | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT080-40; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT080-40; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT080-40 official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass478 g Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT080-40 official product page and parameter table ±1600N（Fz） | Weight*4 | ≈478g Axial size26 mm Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; First dimension in the manufacturer axial-size × diameter notation; exact end details require the drawing. HPS-FT080-40 official product page and parameter table ±40Nm（Mxy） | Size | 26×80(diameter)mm Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT080-40 official product page and parameter table Measuring range | ±1200N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT080-40 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT080-40 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Diameter80 mm Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Dimension explicitly labeled diameter in the exact-model parameter table. HPS-FT080-40 official product page and parameter table ±40Nm（Mxy） | Size | 26×80(diameter)mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT080-40 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Introduction data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT080-40; product introduction; Manufacturer source discrepancy: introduction states 2700 Hz, while parameter table states maximum 2200 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT080-40 official product page and parameter table 2700Hz output data rate Maximum data output rate2,200 Hz Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2700 Hz output data rate, while this table states 2200 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT080-40 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; DC supply range upper endpoint. HPS-FT080-40 official product page and parameter table ±40Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT080-40 official product page and parameter table Model | HPS-FT080-40 | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT080-40 official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy1,200 N Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Symmetric signed range: ±1200 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-40 official product page and parameter table Measuring range | ±1200N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz1,600 N Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Symmetric signed range: ±1600 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-40 official product page and parameter table ±1600N（Fz） | Weight*4 | ≈478g Measurement range magnitude mx and my40 N·m Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Symmetric signed range: ±40 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-40 official product page and parameter table ±40Nm（Mxy） | Size | 26×80(diameter)mm Measurement range magnitude mz40 N·m Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Symmetric signed range: ±40 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-40 official product page and parameter table ±40Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; DC supply range lower endpoint. HPS-FT080-40 official product page and parameter table ±40Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT080-40 official product page and parameter table Model | HPS-FT080-40 | Working temperature | -10~+55℃ Non-linearity upper limit0.5 %FS Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT080-40 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT080-40 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption1.5 W Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT080-40 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W Published size notation26×80(diameter)mm Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT080-40 official product page and parameter table ±40Nm（Mxy） | Size | 26×80(diameter)mm Resolution fx and fy0.01 %FS Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT080-40 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.01 %FS Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT080-40 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT080-40 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT080-40 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT080-40 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT080-40; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT080-40 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W |
| HPS-FT080-5 | 24 bitConfiguration: HPS-FT080-5; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 259 gConfiguration: HPS-FT080-5; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Not published | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT080-5; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT080-5; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT080-5 official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass259 g Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT080-5 official product page and parameter table ±200N（Fz） | Weight*4 | ≈259g Axial size26 mm Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; First dimension in the manufacturer axial-size × diameter notation; exact end details require the drawing. HPS-FT080-5 official product page and parameter table ±5Nm（Mxy） | Size | 26×80(diameter)mm Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT080-5 official product page and parameter table Measuring range | ±150N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT080-5 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT080-5 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Diameter80 mm Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Dimension explicitly labeled diameter in the exact-model parameter table. HPS-FT080-5 official product page and parameter table ±5Nm（Mxy） | Size | 26×80(diameter)mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT080-5 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Introduction data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT080-5; product introduction; Manufacturer source discrepancy: introduction states 2700 Hz, while parameter table states maximum 2200 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT080-5 official product page and parameter table 2700Hz output data rate Maximum data output rate2,200 Hz Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2700 Hz output data rate, while this table states 2200 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT080-5 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; DC supply range upper endpoint. HPS-FT080-5 official product page and parameter table ±5Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT080-5 official product page and parameter table Model | HPS-FT080-5 | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT080-5 official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy150 N Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Symmetric signed range: ±150 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-5 official product page and parameter table Measuring range | ±150N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz200 N Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Symmetric signed range: ±200 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-5 official product page and parameter table ±200N（Fz） | Weight*4 | ≈259g Measurement range magnitude mx and my5 N·m Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Symmetric signed range: ±5 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-5 official product page and parameter table ±5Nm（Mxy） | Size | 26×80(diameter)mm Measurement range magnitude mz5 N·m Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Symmetric signed range: ±5 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-5 official product page and parameter table ±5Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; DC supply range lower endpoint. HPS-FT080-5 official product page and parameter table ±5Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT080-5 official product page and parameter table Model | HPS-FT080-5 | Working temperature | -10~+55℃ Non-linearity upper limit0.5 %FS Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT080-5 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT080-5 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption1.5 W Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT080-5 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W Published size notation26×80(diameter)mm Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT080-5 official product page and parameter table ±5Nm（Mxy） | Size | 26×80(diameter)mm Resolution fx and fy0.01 %FS Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT080-5 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.01 %FS Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT080-5 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT080-5 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT080-5 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT080-5 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT080-5; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT080-5 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W |
| HPS-FT080-60 | 24 bitConfiguration: HPS-FT080-60; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 488 gConfiguration: HPS-FT080-60; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Not published | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT080-60; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT080-60; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT080-60 official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass488 g Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT080-60 official product page and parameter table ±2400N（Fz） | Weight*4 | ≈488g Axial size26 mm Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; First dimension in the manufacturer axial-size × diameter notation; exact end details require the drawing. HPS-FT080-60 official product page and parameter table ±60Nm（Mxy） | Size | 26×80(diameter)mm Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT080-60 official product page and parameter table Measuring range | ±1800N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT080-60 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT080-60 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Diameter80 mm Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Dimension explicitly labeled diameter in the exact-model parameter table. HPS-FT080-60 official product page and parameter table ±60Nm（Mxy） | Size | 26×80(diameter)mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT080-60 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Introduction data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT080-60; product introduction; Manufacturer source discrepancy: introduction states 2700 Hz, while parameter table states maximum 2200 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT080-60 official product page and parameter table 2700Hz output data rate Maximum data output rate2,200 Hz Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2700 Hz output data rate, while this table states 2200 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT080-60 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; DC supply range upper endpoint. HPS-FT080-60 official product page and parameter table ±60Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT080-60 official product page and parameter table Model | HPS-FT080-60 | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT080-60 official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy1,800 N Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Symmetric signed range: ±1800 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-60 official product page and parameter table Measuring range | ±1800N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz2,400 N Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Symmetric signed range: ±2400 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-60 official product page and parameter table ±2400N（Fz） | Weight*4 | ≈488g Measurement range magnitude mx and my60 N·m Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Symmetric signed range: ±60 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-60 official product page and parameter table ±60Nm（Mxy） | Size | 26×80(diameter)mm Measurement range magnitude mz60 N·m Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Symmetric signed range: ±60 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-60 official product page and parameter table ±60Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; DC supply range lower endpoint. HPS-FT080-60 official product page and parameter table ±60Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT080-60 official product page and parameter table Model | HPS-FT080-60 | Working temperature | -10~+55℃ Non-linearity upper limit0.5 %FS Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT080-60 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT080-60 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption1.5 W Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT080-60 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W Published size notation26×80(diameter)mm Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT080-60 official product page and parameter table ±60Nm（Mxy） | Size | 26×80(diameter)mm Resolution fx and fy0.01 %FS Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT080-60 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.01 %FS Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT080-60 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT080-60 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT080-60 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT080-60 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT080-60; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT080-60 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W |
| HPS-FT060S | 24 bitConfiguration: HPS-FT060S; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 502 gConfiguration: HPS-FT060S; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Diameter 3Configuration: HPS-FT060S; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT060S; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT060S; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT060S official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass502 g Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT060S official product page and parameter table ±1400N（Fz） | Weight*4 | ≈502g Cable diameter calloutDiameter 3 Manufacturer specification Configuration: HPS-FT060S; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing ⌀3 Cable Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT060S official product page and parameter table Measuring range | ±1000N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT060S official product page and parameter table Non-linearity | ＜1.25(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT060S official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Dimension labeled diameter78 mm Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Middle dimension explicitly labeled diameter; full published size notation is preserved separately. HPS-FT060S official product page and parameter table ±30Nm（Mxy） | Size | 87×78(diameter)x28.5mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT060S official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal First published overall dimension87 mm Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; First value in the printed three-value size notation; axis designation is not stated. HPS-FT060S official product page and parameter table ±30Nm（Mxy） | Size | 87×78(diameter)x28.5mm Front locating-hole callouts2 x diameter 4 (+0.012/0), depth 4; center diameter 10 (+0.015/0), depth 3 Manufacturer specification Configuration: HPS-FT060S; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 2 x ⌀4 +0.012/0 ↧4; ⌀10 +0.015/0 ↧3 Front threaded mounting callout6 x M4 depth 6; evenly distributed Manufacturer specification Configuration: HPS-FT060S; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 6 x M4 ↧6 (Evenly distributed) Front through-hole callout4 x diameter 5.3 through hole; evenly distributed Manufacturer specification Configuration: HPS-FT060S; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 4 x ⌀5.3through hole (Evenly distributed) Introduction data output rate2,000 Hz Manufacturer specification Configuration: HPS-FT060S; product introduction; Manufacturer source discrepancy: introduction states 2000 Hz, while parameter table states maximum 2700 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT060S official product page and parameter table 2000Hz output data rate Maximum data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2000 Hz output data rate, while this table states 2700 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT060S official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2700Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; DC supply range upper endpoint. HPS-FT060S official product page and parameter table ±30Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT060S official product page and parameter table Model | HPS-FT060S | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT060S official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy1,000 N Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Symmetric signed range: ±1000 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT060S official product page and parameter table Measuring range | ±1000N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz1,400 N Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Symmetric signed range: ±1400 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT060S official product page and parameter table ±1400N（Fz） | Weight*4 | ≈502g Measurement range magnitude mx and my30 N·m Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Symmetric signed range: ±30 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT060S official product page and parameter table ±30Nm（Mxy） | Size | 87×78(diameter)x28.5mm Measurement range magnitude mz30 N·m Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Symmetric signed range: ±30 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT060S official product page and parameter table ±30Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; DC supply range lower endpoint. HPS-FT060S official product page and parameter table ±30Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT060S official product page and parameter table Model | HPS-FT060S | Working temperature | -10~+55℃ Non-linearity upper limit1.25 %FS Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT060S official product page and parameter table Non-linearity | ＜1.25(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT060S official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption0.5 W Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT060S official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 0.5W Published size notation87×78(diameter)x28.5mm Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT060S official product page and parameter table ±30Nm（Mxy） | Size | 87×78(diameter)x28.5mm Rear locating-hole callouts2 x diameter 4 (+0.012/0), depth 4; center diameter 10 (+0.015/0), depth 2 Manufacturer specification Configuration: HPS-FT060S; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 2 x ⌀4 +0.012/0 ↧4; ⌀10 +0.015/0 ↧2 Rear threaded mounting callout4 x M5 depth 5; evenly distributed Manufacturer specification Configuration: HPS-FT060S; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing. HPS-FT060E/HPS-060S Dimensional Drawing 4 x M5 ↧5 (Evenly distributed) Resolution fx and fy0.01 %FS Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT060S official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.01 %FS Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT060S official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2700Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT060S official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT060S official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT060S official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT060S official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 0.5W Third published dimension28.5 mm Manufacturer specification Configuration: HPS-FT060S; exact-model parameter table; Third value in the printed three-value size notation; axis designation is not stated. HPS-FT060S official product page and parameter table ±30Nm（Mxy） | Size | 87×78(diameter)x28.5mm |
| HPS-FT080-20 | 24 bitConfiguration: HPS-FT080-20; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. | 269 gConfiguration: HPS-FT080-20; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. | Not published | Ethernet, EtherCAT, RS-485 and analog outputConfiguration: HPS-FT080-20; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. | 2 %FSConfiguration: HPS-FT080-20; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Adc resolution24 bit Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution. HPS-FT080-20 official product page and parameter table Equipped with high performance processor and 24bit ADC Approximate mass269 g Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved. HPS-FT080-20 official product page and parameter table ±800N（Fz） | Weight*4 | ≈269g Axial size26 mm Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; First dimension in the manufacturer axial-size × diameter notation; exact end details require the drawing. HPS-FT080-20 official product page and parameter table ±20Nm（Mxy） | Size | 26×80(diameter)mm Communication interface optionsEthernet, EtherCAT, RS-485 and analog output Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options. HPS-FT080-20 official product page and parameter table Measuring range | ±600N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Crosstalk upper limit2 %FS Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim. HPS-FT080-20 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Customizable ingress protectionIP67 Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration. HPS-FT080-20 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Diameter80 mm Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Dimension explicitly labeled diameter in the exact-model parameter table. HPS-FT080-20 official product page and parameter table ±20Nm（Mxy） | Size | 26×80(diameter)mm External connector typeCold-pressed terminal Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified. HPS-FT080-20 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Front locating-hole callouts2 x diameter 5, depth 6; center diameter 12, depth 4 Manufacturer specification Configuration: HPS-FT080-20; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. Applied only to FT080-20, the model printed in the drawing title, although the same asset is also embedded by other FT080 variant pages. HPS-FT080-20 Dimensional Drawing 2 x ⌀5 ↧6; ⌀12 ↧4 Front threaded mounting callout6 x M4 depth 6; evenly distributed Manufacturer specification Configuration: HPS-FT080-20; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. Applied only to FT080-20, the model printed in the drawing title, although the same asset is also embedded by other FT080 variant pages. HPS-FT080-20 Dimensional Drawing 6 x M4 ↧6 (Evenly distributed) Introduction data output rate2,700 Hz Manufacturer specification Configuration: HPS-FT080-20; product introduction; Manufacturer source discrepancy: introduction states 2700 Hz, while parameter table states maximum 2200 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim. HPS-FT080-20 official product page and parameter table 2700Hz output data rate Maximum data output rate2,200 Hz Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2700 Hz output data rate, while this table states 2200 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other. HPS-FT080-20 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Maximum dc supply voltage24 V Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; DC supply range upper endpoint. HPS-FT080-20 official product page and parameter table ±20Nm（Mz） | Power supply | DC 12V~24V Maximum working temperature55 °C Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Upper endpoint of the published working-temperature range. HPS-FT080-20 official product page and parameter table Model | HPS-FT080-20 | Working temperature | -10~+55℃ Measured spatial axesForces and torques on XYZ Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately. HPS-FT080-20 official product page and parameter table Measuring force and torque on three spatial axes of XYZ Measurement range magnitude fx and fy600 N Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Symmetric signed range: ±600 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-20 official product page and parameter table Measuring range | ±600N（Fxy） | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output Measurement range magnitude fz800 N Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Symmetric signed range: ±800 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-20 official product page and parameter table ±800N（Fz） | Weight*4 | ≈269g Measurement range magnitude mx and my20 N·m Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Symmetric signed range: ±20 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-20 official product page and parameter table ±20Nm（Mxy） | Size | 26×80(diameter)mm Measurement range magnitude mz20 N·m Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Symmetric signed range: ±20 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range. HPS-FT080-20 official product page and parameter table ±20Nm（Mz） | Power supply | DC 12V~24V Minimum dc supply voltage12 V Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; DC supply range lower endpoint. HPS-FT080-20 official product page and parameter table ±20Nm（Mz） | Power supply | DC 12V~24V Minimum working temperature-10 °C Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Lower endpoint of the published working-temperature range. HPS-FT080-20 official product page and parameter table Model | HPS-FT080-20 | Working temperature | -10~+55℃ Non-linearity upper limit0.5 %FS Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy. HPS-FT080-20 official product page and parameter table Non-linearity | ＜0.5(%FS) | Crosstalk | <2(%FS) Overload capacity350 % Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim. HPS-FT080-20 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Power consumption1.5 W Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined. HPS-FT080-20 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W Published size notation26×80(diameter)mm Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred. HPS-FT080-20 official product page and parameter table ±20Nm（Mxy） | Size | 26×80(diameter)mm Rear locating-hole callout2 x diameter 5, depth 4 Manufacturer specification Configuration: HPS-FT080-20; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. Applied only to FT080-20, the model printed in the drawing title, although the same asset is also embedded by other FT080 variant pages. HPS-FT080-20 Dimensional Drawing 2 x ⌀5 ↧4 Resolution fx and fy0.01 %FS Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee. HPS-FT080-20 official product page and parameter table Resolution | 0.01(%FS)（Fxy） | External connector type | Cold-pressed terminal Resolution fz0.01 %FS Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee. HPS-FT080-20 official product page and parameter table 0.01(%FS)（Fz） | Data output rate*2 | 2200Hz(max) Resolution mx and my0.01 %FS Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee. HPS-FT080-20 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） Resolution mz0.01 %FS Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee. HPS-FT080-20 official product page and parameter table 0.01(%FS)（Mz） | Overload capacity*3 | 350% Sensor-side socket drawing label6-pin aviation socket Manufacturer specification Configuration: HPS-FT080-20; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. Applied only to FT080-20, the model printed in the drawing title, although the same asset is also embedded by other FT080 variant pages. Sensor-side socket label; the table cold-pressed terminal may describe the cable end. No unverified equivalence or replacement is inferred. HPS-FT080-20 Dimensional Drawing 6Paviation socket Standard ingress protectionIP64 Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap. HPS-FT080-20 official product page and parameter table 0.01(%FS)（Mxy） | Protection degree | IP64（Customizable: IP67） System structureDigital output + Adaptor Manufacturer specification Configuration: HPS-FT080-20; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head. HPS-FT080-20 official product page and parameter table System structure | Digital output + Adaptor | Power consumption | 1.5W |
Share your team background and technical or sourcing goals. We’ll check availability with relevant company representatives and coordinate the next steps.
How it works
Select your target companies and dates, and share your team background and technical or sourcing goals.
We identify relevant company representatives, discuss your requirements and check availability.
Review the proposed agenda, arrangements and fees, then confirm your schedule by email.
Fees apply and vary based on the companies you select and the final arrangements. Your preferred dates are provisional. Our team will confirm the schedule based on the availability of our staff and the selected companies.
Connect with robotics manufacturers matched to your project, discuss technical requirements, and evaluate solutions firsthand.
Initiate ConnectionAlready have a company in mind? Ask for an introduction. For sourcing, integration or deployment, tell us about your project.
02 / DISCOVER THE MOST ADVANCED ROBOTS.
FIND YOUR NEXT ROBOTICS PARTNER
Meet the people behind the products. Plan company visits and technical conversations around your project.
Initiate connectionDiscover and compare humanoid robots from around the world.
Step inside a working showcase of robotics, from humanoids and helpful machines to the parts that bring them to life.
Inside the showroom
Explore complete machines, real-world applications, and the components behind them. Get a closer look at the variety on display.
Showing all 8 exhibit highlights.
Interaction
A first handshake. A playful boxing pose. See how robots move alongside us.
Service robots
Discover a service robot in a shop-counter setting, with objects it can handle.
Robot dogs
Take a closer look at robot dogs and the mechanics that keep them moving.
Dexterous hands
Explore the dexterous hands that turn movement into precise manipulation.
Humanoids
Get close to the joints, sensors, and structure of a full-size humanoid.
Wearable robotics
Discover wearable assistance alongside robots built for very different environments.
Real-world applications
Explore practical applications, including automated cooking and everyday services.
Core components
Look beyond the body to the components and engineering that make it possible.
A glimpse of what’s inside. Exhibits and live demonstrations may vary by visit.
More than a display
The best questions come when you’re standing right beside a robot. A guided visit brings the hardware, the demonstrations, and the conversation together.
Follow the showroom route and discover how different robots are used.
Get hands-on with selected robots through guided interaction.
Ask about the technology, share your interests, and explore what comes next.
Beyond the showroom
The sky deck opens onto Shenzhen’s skyline and surrounding mountains. Take in the place where robotics companies, researchers, and makers are building what comes next.
Curiosity brings us together
For the simply curious, the people building, and the teams exploring their next idea. Robot Valley is a place to see the technology and talk about where it could go.
Plan your visit
Choose your preferred date and group size on the booking page. The team will confirm the arrangements with you.
A guided showroom experience with hands-on robot operation and interactive demonstrations. You’ll have time to ask questions and explore the exhibits. Specific robots and activities depend on the day’s arrangements.
Yes. Visits are by appointment. Use the booking page to choose your preferred date and share your group details. The team will confirm availability, fees, and arrangements before your visit.
Tell us your group size and interests when booking. Company teams, students, researchers, and other groups can discuss their priorities with the team before the visit.
Share the robots, applications, or components you’re interested in with your booking request. The team can discuss what’s available and suitable for your visit.
Something else on your mind? info@robotuo.com
Your next encounter with robotics
Real robots. Real conversations.
See you in Shenzhen.
About Robotuo
Get closer to the people, technology, and opportunities shaping robotics in China.
Local knowledge / Firsthand insight / Global reach
About us
We connect global teams with China’s robotics supply chain and the SZ RoboX open-source community to find partners, share expertise, and bring robotics to new markets.
For companies, developers, and entrepreneurs building what comes next in robotics.
Access robotics, AI hardware, and component suppliers in China. Find partners that fit your business.
Understand Chinese businesses, explore technical capabilities, and find opportunities for collaboration.
With over 1,000 business visitors and buyers served across more than 20 countries and regions, we draw on international experience to connect teams with robotics industry resources.
OUR MISSION
We combine supply chain integration and open-source deployment standards to support robotics applications worldwide.
For Companies
We combine supply chain integration with the development of open-source deployment standards, connecting technology and hardware resources to support robotics applications worldwide.
For Developers & Entrepreneurs
Join the SZ RoboX open-source robotics community to exchange technical knowledge with developers and entrepreneurs, follow global industry developments, and explore opportunities to innovate and collaborate.
YOUR PRIVACY
How this website uses information, and the choices you can make.
Last updated: .
Robotuo is responsible for the personal information processed through this website.
This policy covers browsing Robotuo, local preferences, and our planned use of Google Analytics through Firebase and OneSignal web push notifications. These optional services only run when enabled on the site and you have agreed to the relevant category.
You can browse without an account or agreeing to optional services. Our hosting provider receives your IP address, requested URL, browser information, and request time to deliver and protect the site. Our basis for this processing is our legitimate interest in operating a secure, reliable website.
We store your privacy choices in this browser so we can respect them. This essential preference includes the policy version, your choices, and when you made them; it is not sent to an analytics service. Hosting and security logs are separate from these browser settings.
With your consent, “Remember my selections” stores comparisons and followed companies and products in this browser. These are not synced to an account or shared with Google or OneSignal by our integration. Without consent, these features still work for the current page session.
Turning this option off deletes saved selections from local storage. Current selections remain in memory until you reload or close the page.
With analytics consent, we use the Google Analytics web stream linked to our Firebase project to understand which parts of Robotuo are used and improve the website. Google processes online identifiers, cookie identifiers, browser and device information, general page categories, and usage events. IP addresses are used by Google during collection, including to derive approximate location.
Our integration uses general page categories rather than search terms, full query strings, or individual company and product identifiers. With analytics consent, we also measure visits attributed to recognized AI services and confirmed Connect requests from those visits. We send a fixed provider label and page category, without sending the original referral URL or form contents. Attribution lasts only within the current page session and may be incomplete. We do not send application form contents, names, or email addresses to Analytics. Advertising consent remains off; Google signals and advertising personalization are disabled in our integration.
The Google tag is not loaded before analytics consent. Declining analytics does not enable cookieless analytics pings. Learn more in Google’s Privacy Policy and Firebase’s privacy information.
With notification consent, OneSignal helps us deliver Robotuo news and updates. It processes subscription and device identifiers, push tokens, browser and operating system information, IP address, language, and notification delivery and interaction information. This service may use browser storage and a service worker to deliver notifications even when the website is closed.
Saving consent does not grant browser permission. Open Privacy settings, save your notification choice, then select “Enable notifications” and allow notifications in your browser if prompted. You can withdraw consent here or block notifications in your browser’s site settings.
Withdrawal disables further SDK data collection and attempts to unsubscribe this browser from push messages. It does not automatically erase information already held by OneSignal. See OneSignal’s Privacy Policy.
Our essential robotuo-privacy record is kept in local storage and is valid for 180 days. We ask again when it expires or the consent version changes. Saved selections use robotuo-compare, robotuo-catalog-follows, robotuo-product-follows, and robotuo-follow-labels; they stay until you withdraw that choice, your consent expires, or you clear site data.
When analytics is enabled with consent, Google uses cookies such as _ga and _ga_*. Our integration limits these cookies to 180 days without automatic renewal. Withdrawing analytics consent disables collection and removes accessible Analytics cookies for this site. Cookie expiry is separate from the retention of data already received by Google.
OneSignal stores subscription information in browser storage and its service worker. Vendor-held records and hosting logs follow the retention settings and obligations applicable to those services; withdrawing consent does not itself delete previously collected records. You can request erasure where applicable.
Use “Reject all,” “Accept all,” or individual choices in Privacy settings. Optional categories are off by default. Closing settings or continuing to browse does not give consent. The Privacy settings button is available in the footer throughout the site. Withdrawing consent is as easy as giving it and does not affect the lawfulness of processing before withdrawal.
Where the GDPR or UK GDPR applies, you may request access, correction, erasure, restriction, or portability of your personal information and object to processing based on legitimate interests. You may complain to your local data protection authority. We normally respond to rights requests within one month, subject to applicable extensions and identity verification.
Privacy contact details will be published before optional services are activated.
Clearing browser data resets these choices. To stop push notifications, also disable notification permission in your browser; clearing site data alone may not withdraw permission. Choices apply to this browser, not every device you use.
Our hosting provider, Google, OneSignal, and the browser’s push delivery provider may process technical information needed for their respective services. Processing may take place outside your country, including in the United States. Where required, transfers need appropriate safeguards, such as applicable adequacy decisions or standard contractual clauses. You may request information about safeguards that apply to your data.
Saved selections, analytics, and notification processing rely on your consent. We do not sell the information collected through these features or use it for advertising in this integration.
Search terms filter content in your browser and may appear in the page URL. Avoid entering sensitive information into search. Application and issue-report drafts stay in this page until you choose Send. Sending shares the information you entered and the relevant page with Robotuo through our hosting provider and Feishu, where our team reviews it and follows up. Do not include sensitive personal information. These submissions work independently of optional analytics and notification preferences.
To limit repeated requests, our server processes your IP address and stores a keyed hash with short-lived counters. When deployed with our shared Upstash Redis store, it stores these hashes, submission identifiers and delivery state for up to 24 hours; form contents are not stored there. Application and report records remain in Feishu for team review and follow-up. Contact Robotuo about access or deletion using the contact information in this policy.
Reloading or closing the page clears unsent drafts. Visit previews do not send a booking. Company websites and the Robot Valley booking page are separate websites with their own privacy practices. Review their policies before submitting personal details.