2 | AC input frequency range | 50-60Hz |

1 | AC input voltage range | 176-264 Vac |

3.The voltage and current conversion point is determined by different batteries, and the special requirements during the charging process can be customized.

This series of charger products adopt high-frequency switching power supply technology, built-in microprocessor intelligent management charging, and can perform CC and CV intelligent multi-stage charging;

3 | Charging Light | When the charging light flashes, it means charging

High safety: low contact current，less than 0.75mA.

2 | Fault Light | When the fault light is on, it indicates that the charger or battery is faulty

4 | Full Light | When the full light is on, the battery is fully charged

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

Input line specification | 3* 0.75 mm² * 1.5 m

Input plug | 3PIN National Standard 10A

2.The charging process of lead-acid batteries is divided into pre-charging, constant current, constant voltage, and floating charging stages;

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

1. Lithium battery charging process is divided into pre-charge, constant current, constant voltage and other stages;

Weight | About 1.6KG

3 | Maxium input current | ＜6A |

2HK600-24V20A | 220V | 24V | 20A

1 | ON Light | When the power light is on, it indicates that there is input voltage

5 | Output communication interface | 485 or CAN | Optional

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

Output plug | SB50A(Optional)

Output line specifications | 2* 2.5mm² *1.5 m

4 | Output power | ＜650W |

2HK600-24V20A | 220V | 24V | 20A

2HK600-24V20A | 220V | 24V | 20A

suitable for maintenance and charging of various lithium batteries and lead-acid batteries.

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

2 | AC input frequency range | 50-60Hz |

1 | AC input voltage range | 176-264 Vac |

3.The voltage and current conversion point is determined by different batteries, and the special requirements during the charging process can be customized.

This series of charger products adopt high-frequency switching power supply technology, built-in microprocessor intelligent management charging, and can perform CC and CV intelligent multi-stage charging;

3 | Charging Light | When the charging light flashes, it means charging

High safety: low contact current，less than 0.75mA.

2 | Fault Light | When the fault light is on, it indicates that the charger or battery is faulty

4 | Full Light | When the full light is on, the battery is fully charged

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

Input line specification | 3* 0.75 mm² * 1.5 m

Input plug | 3PIN National Standard 10A

2.The charging process of lead-acid batteries is divided into pre-charging, constant current, constant voltage, and floating charging stages;

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

1. Lithium battery charging process is divided into pre-charge, constant current, constant voltage and other stages;

Weight | About 1.6KG

3 | Maxium input current | ＜6A |

2HK600-48V10A | 220V | 48V | 10A

1 | ON Light | When the power light is on, it indicates that there is input voltage

5 | Output communication interface | 485 or CAN | Optional

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

Output plug | SB50A(Optional)

Output line specifications | 2* 2.5mm² *1.5 m

4 | Output power | ＜650W |

2HK600-48V10A | 220V | 48V | 10A

2HK600-48V10A | 220V | 48V | 10A

suitable for maintenance and charging of various lithium batteries and lead-acid batteries.

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

2 | AC input frequency range | 50-60Hz |

1 | AC input voltage range | 176-264 Vac |

3.The voltage and current conversion point is determined by different batteries, and the special requirements during the charging process can be customized.

This series of charger products adopt high-frequency switching power supply technology, built-in microprocessor intelligent management charging, and can perform CC and CV intelligent multi-stage charging;

3 | Charging Light | When the charging light flashes, it means charging

High safety: low contact current，less than 0.75mA.

2 | Fault Light | When the fault light is on, it indicates that the charger or battery is faulty

4 | Full Light | When the full light is on, the battery is fully charged

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

Input line specification | 3* 0.75 mm² * 1.5 m

Input plug | 3PIN National Standard 10A

2.The charging process of lead-acid batteries is divided into pre-charging, constant current, constant voltage, and floating charging stages;

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

1. Lithium battery charging process is divided into pre-charge, constant current, constant voltage and other stages;

Weight | About 1.6KG

3 | Maxium input current | ＜6A |

2HK600-36V12A | 220V | 36V | 12A

1 | ON Light | When the power light is on, it indicates that there is input voltage

5 | Output communication interface | 485 or CAN | Optional

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

Output plug | SB50A(Optional)

Output line specifications | 2* 2.5mm² *1.5 m

4 | Output power | ＜650W |

2HK600-36V12A | 220V | 36V | 12A

2HK600-36V12A | 220V | 36V | 12A

suitable for maintenance and charging of various lithium batteries and lead-acid batteries.

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

2 | AC input frequency range | 50-60Hz |

1 | AC input voltage range | 176-264 Vac |

3.The voltage and current conversion point is determined by different batteries, and the special requirements during the charging process can be customized.

This series of charger products adopt high-frequency switching power supply technology, built-in microprocessor intelligent management charging, and can perform CC and CV intelligent multi-stage charging;

3 | Charging Light | When the charging light flashes, it means charging

High safety: low contact current，less than 0.75mA.

2 | Fault Light | When the fault light is on, it indicates that the charger or battery is faulty

4 | Full Light | When the full light is on, the battery is fully charged

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

Input line specification | 3* 0.75 mm² * 1.5 m

Input plug | 3PIN National Standard 10A

2.The charging process of lead-acid batteries is divided into pre-charging, constant current, constant voltage, and floating charging stages;

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

1. Lithium battery charging process is divided into pre-charge, constant current, constant voltage and other stages;

Weight | About 1.6KG

3 | Maxium input current | ＜6A |

2HK600-60V8A | 220V | 60V | 8A

1 | ON Light | When the power light is on, it indicates that there is input voltage

5 | Output communication interface | 485 or CAN | Optional

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）

Output plug | SB50A(Optional)

Output line specifications | 2* 2.5mm² *1.5 m

4 | Output power | ＜650W |

2HK600-60V8A | 220V | 60V | 8A

2HK600-60V8A | 220V | 60V | 8A

suitable for maintenance and charging of various lithium batteries and lead-acid batteries.

Dimensions (length*width*height) | 208mm * 110mm * 65mm （If you need to install, you can add a mounting base）