Product family

iHSV pulse integrated AC servo motors

9 variants · Varies by Model, Electrical rating, Configuration

Shenzhen Just Motion Control Electromechanics Co., Ltd.

About this product family

Manufacturer-defined iHSV pulse integrated AC servo motors family. Exact models, configurations, source evidence and specifications remain on the individual products.

Compare variants

Values retain their source conditions and claim stage. A missing value means it has not been published in this catalogue.

Variant / modelFeedback controlHolding torqueInsulation classMotor phase countNo-load speedDetails & evidence
iHSV86-30-44-48

Fully closed loopConfiguration: iHSV86-30-44-48; Exact manufacturer model page.

1.4 N·mConfiguration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

BConfiguration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

3 phasesConfiguration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

4200 rpmConfiguration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

Full specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV86-30-44-48; Exact manufacturer model page.

iHSV86-30-44-48
◼ Fully closed loop

Holding torque

1.4 N·m

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

iHSV86-30-44-48
Holding Torque: (N.M) 1.4

Insulation class

B

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV86-30-44-48
INSULATION CLASSE (UL) B

Motor phase count

3 phases

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV86-30-44-48
phase 3

No-load speed

4200 rpm

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV86-30-44-48
No Load speed: (rpm±10%) 4200

Rated motor current

13.1 A

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV86-30-44-48
Rated current: (A±20%) 13.1

Rated output power

440 W

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV86-30-44-48
Rated Power: (W) 440

Rated speed

3000 rpm

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±7%.

iHSV86-30-44-48
Rated Speed: (rpm ±7%) 3000

Rated voltage

48 V DC

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV86-30-44-48
Rated Voltage: (V) 48

Rotor inertia

3250 g·cm²

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV86-30-44-48
Rotor Inertia (g.cm²) 3250

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV86-30-44-48; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off

Torque constant

0.11 N·m/A

Reported claim

Configuration: iHSV86-30-44-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV86-30-44-48
Torque coefficient (N.M/A) 0.11
iHSV57-30-14-36

Fully closed loopConfiguration: iHSV57-30-14-36; Exact manufacturer model page.

0.78 N·mConfiguration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

BConfiguration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

3 phasesConfiguration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

4200 rpmConfiguration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

Full specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV57-30-14-36; Exact manufacturer model page.

iHSV57-30-14-36
◼ Fully closed loop

Holding torque

0.78 N·m

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

iHSV57-30-14-36
Holding Torque: (N.M) 0.78

Insulation class

B

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-14-36
INSULATION CLASSE (UL) B

Line-to-line inductance

0.45 mH

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV57-30-14-36
line-line Industant (mH±20%) 0.45

Line-to-line resistance

0.84 Ω

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV57-30-14-36
line-line Resistant (Ω ±10%) 0.84

Motor phase count

3 phases

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-14-36
phase 3

No-load current

0.55 A

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±0.15 A.

iHSV57-30-14-36
No Load current: (A±0.15) 0.55

No-load speed

4200 rpm

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV57-30-14-36
No Load speed: (rpm±10%) 4200

Rated motor current

5.4 A

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV57-30-14-36
Rated current: (A±20%) 5.4

Rated output power

140 W

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-14-36
Rated Power: (W) 140

Rated speed

3000 rpm

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±7%.

iHSV57-30-14-36
Rated Speed: (rpm ±7%) 3000

Rated voltage

36 V DC

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-14-36
Rated Voltage: (V) 36

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV57-30-14-36; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off

Torque constant

0.08 N·m/A

Reported claim

Configuration: iHSV57-30-14-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-14-36
Torque coefficient (N.M/A) 0.08
iHSV60-30-20-36

Fully closed loopConfiguration: iHSV60-30-20-36; Exact manufacturer model page.

0.65 N·mConfiguration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

BConfiguration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

3 phasesConfiguration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

4200 rpmConfiguration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

Full specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV60-30-20-36; Exact manufacturer model page.

iHSV60-30-20-36
◼ Fully closed loop

Holding torque

0.65 N·m

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

iHSV60-30-20-36
Holding Torque: (N.M) 0.65

Insulation class

B

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-20-36
INSULATION CLASSE (UL) B

Line-to-line resistance

0.6 Ω

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV60-30-20-36
line-line Resistant (Ω ±10%) 0.6

Motor phase count

3 phases

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-20-36
phase 3

No-load current

0.8 A

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±0.15 A.

iHSV60-30-20-36
No Load current: (A±0.15) 0.8

No-load speed

4200 rpm

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV60-30-20-36
No Load speed: (rpm±10%) 4200

Rated motor current

8.5 A

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV60-30-20-36
Rated current: (A±20%) 8.5

Rated output power

200 W

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-20-36
Rated Power: (W) 200

Rated speed

3000 rpm

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±7%.

iHSV60-30-20-36
Rated Speed: (rpm ±7%) 3000

Rated voltage

36 V DC

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-20-36
Rated Voltage: (V) 36

Rotor inertia

325 g·cm²

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-20-36
Rotor Inertia (g.cm²) 325

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV60-30-20-36; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off

Torque constant

0.082 N·m/A

Reported claim

Configuration: iHSV60-30-20-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-20-36
Torque coefficient (N.M/A) 0.082
iHSV42-40-05-24

Fully closed loopConfiguration: iHSV42-40-05-24; Exact manufacturer model page.

0.125 N·mConfiguration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

BConfiguration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

3 phasesConfiguration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

5200 rpmConfiguration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

Full specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Back-emf constant

3.26 V/krpm

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Back-EMF constant (V/krpm) 3.26

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV42-40-05-24; Exact manufacturer model page.

iHSV42-40-05-24
◼ Fully closed loop

Holding torque

0.125 N·m

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

iHSV42-40-05-24
Holding Torque: (N.M) 0.125

Insulation class

B

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
INSULATION CLASSE (UL) B

Line-to-line resistance

2 Ω

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV42-40-05-24
line-line Resistant (Ω ±10%) 2

Motor phase count

3 phases

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
phase 3

No-load current

0.45 A

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±0.15 A.

iHSV42-40-05-24
No Load current: (A±0.15) 0.45

No-load speed

5200 rpm

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV42-40-05-24
No Load speed: (rpm±10%) 5200

Rated motor current

3.4 A

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV42-40-05-24
Rated current: (A±20%) 3.4

Rated output power

52 W

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Rated Power: (W) 52

Rated speed

4000 rpm

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±7%.

iHSV42-40-05-24
Rated Speed: (rpm ±7%) 4000

Rated voltage

24 V DC

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Rated Voltage: (V) 24

Rotor inertia

95 g·cm²

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Rotor Inertia (g.cm²) 95

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV42-40-05-24; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off

Torque constant

0.044 N·m/A

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Torque coefficient (N.M/A) 0.044
iHSV57-30-10-36

Fully closed loopConfiguration: iHSV57-30-10-36; Exact manufacturer model page.

Not published

BConfiguration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

3 phasesConfiguration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

4200 rpmConfiguration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

Full specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV57-30-10-36; Exact manufacturer model page.

iHSV57-30-10-36
◼ Fully closed loop

Insulation class

B

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-10-36
INSULATION CLASSE (UL) B

Line-to-line inductance

1.2 mH

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV57-30-10-36
Line-line Industant mH ±20% 1.2

Line-to-line resistance

1.19 Ω

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV57-30-10-36
Line-line Resistant Ω ±10% 1.19

Motor phase count

3 phases

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-10-36
phase 3

No-load speed

4200 rpm

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV57-30-10-36
No Load speed: rpm±10% 4200

Rated motor current

3.5 A

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV57-30-10-36
Rated Current: A±20% 3.5

Rated output power

91 W

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-10-36
Rated Power: W 91

Rated speed

3000 rpm

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±7%.

iHSV57-30-10-36
Rated Speed: rpm ±7% 3000

Rated torque

0.29 N·m

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-10-36
Rated torque: N.M 0.29

Rated voltage

36 V DC

Reported claim

Configuration: iHSV57-30-10-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-10-36
Rated Voltage: V 36

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV57-30-10-36; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off
iHSV86-30-66-72

Fully closed loopConfiguration: iHSV86-30-66-72; Exact manufacturer model page.

Not publishedNot publishedNot publishedNot publishedFull specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV86-30-66-72; Exact manufacturer model page.

iHSV86-30-66-72
◼ Fully closed loop

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV86-30-66-72; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off
iHSV60-30-40-48

Fully closed loopConfiguration: iHSV60-30-40-48; Exact manufacturer model page.

1.27 N·mConfiguration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

BConfiguration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

3 phasesConfiguration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

4200 rpmConfiguration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

Full specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV60-30-40-48; Exact manufacturer model page.

iHSV60-30-40-48
◼ Fully closed loop

Holding torque

1.27 N·m

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

iHSV60-30-40-48
Holding Torque: (N.M) 1.27

Insulation class

B

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-40-48
INSULATION CLASSE (UL) B

Motor phase count

3 phases

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-40-48
phase 3

No-load current

1.2 A

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±0.15 A.

iHSV60-30-40-48
No Load current: (A±0.15) 1.2

No-load speed

4200 rpm

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV60-30-40-48
No Load speed: (rpm±10%) 4200

Rated motor current

11.2 A

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV60-30-40-48
Rated current: (A±20%) 11.2

Rated output power

400 W

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-40-48
Rated Power: (W) 400

Rated speed

3000 rpm

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±7%.

iHSV60-30-40-48
Rated Speed: (rpm ±7%) 3000

Rated voltage

48 V DC

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-40-48
Rated Voltage: (V) 48

Rotor inertia

680 g·cm²

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-40-48
Rotor Inertia (g.cm²) 680

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV60-30-40-48; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off

Torque constant

0.11 N·m/A

Reported claim

Configuration: iHSV60-30-40-48; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV60-30-40-48
Torque coefficient (N.M/A) 0.11
iHSV57-30-18-36

Fully closed loopConfiguration: iHSV57-30-18-36; Exact manufacturer model page.

0.6 N·mConfiguration: iHSV57-30-18-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

Not published

3 phasesConfiguration: iHSV57-30-18-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

Not publishedFull specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV57-30-18-36; Exact manufacturer model page.

iHSV57-30-18-36
◼ Fully closed loop

Holding torque

0.6 N·m

Reported claim

Configuration: iHSV57-30-18-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

iHSV57-30-18-36
Holding Torque: (N.M) 0.6

Line-to-line inductance

0.58 mH

Reported claim

Configuration: iHSV57-30-18-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV57-30-18-36
line-line Industant (mH±20%) 0.58

Line-to-line resistance

0.53 Ω

Reported claim

Configuration: iHSV57-30-18-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV57-30-18-36
line-line Resistant (Ω ±10%) 0.53

Motor phase count

3 phases

Reported claim

Configuration: iHSV57-30-18-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-18-36
phase 3

Rated output power

180 W

Reported claim

Configuration: iHSV57-30-18-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-18-36
Rated Power: (W) 180

Rated voltage

36 V DC

Reported claim

Configuration: iHSV57-30-18-36; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV57-30-18-36
Rated Voltage: (V) 36

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV57-30-18-36; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off
IHSV42-40-07-24

Fully closed loopConfiguration: IHSV42-40-07-24; Exact manufacturer model page.

0.185 N·mConfiguration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

BConfiguration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

3 phasesConfiguration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

5200 rpmConfiguration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

Full specifications
Source-backed claims

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Back-emf constant

3.26 V/krpm

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

IHSV42-40-07-24
Back-EMF constant (V/krpm) 3.26

Feedback control

Fully closed loop

Manufacturer specification

Configuration: IHSV42-40-07-24; Exact manufacturer model page.

IHSV42-40-07-24
◼ Fully closed loop

Holding torque

0.185 N·m

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

IHSV42-40-07-24
Holding Torque: (N.M) 0.185

Insulation class

B

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

IHSV42-40-07-24
INSULATION CLASSE (UL) B

Line-to-line resistance

0.8 Ω

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

IHSV42-40-07-24
line-line Resistant (Ω ±10%) 0.8

Motor phase count

3 phases

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

IHSV42-40-07-24
phase 3

No-load current

0.6 A

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±0.15 A.

IHSV42-40-07-24
No Load current: (A±0.15) 0.6

No-load speed

5200 rpm

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

IHSV42-40-07-24
No Load speed: (rpm±10%) 5200

Rated motor current

5.1 A

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

IHSV42-40-07-24
Rated current: (A±20%) 5.1

Rated output power

78 W

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

IHSV42-40-07-24
Rated Power: (W) 78

Rated speed

4000 rpm

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±7%.

IHSV42-40-07-24
Rated Speed: (rpm ±7%) 4000

Rated voltage

24 V DC

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

IHSV42-40-07-24
Rated Voltage: (V) 24

Rotor inertia

147 g·cm²

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

IHSV42-40-07-24
Rotor Inertia (g.cm²) 147

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: IHSV42-40-07-24; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off

Torque constant

0.044 N·m/A

Reported claim

Configuration: IHSV42-40-07-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

IHSV42-40-07-24
Torque coefficient (N.M/A) 0.044

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.