Product family

LT-COMP

21 variants · Varies by Compensation axes, Flange interface, XY compensation range, Z compensation range

About this product family

The manufacturer selection table and series manuals list LT-COMP compensation units by flange size and XY, Z or XYZ compensation direction. Size and motion range are variation dimensions, not separate unrelated families.

Each member retains its own specifications, availability, images and source evidence.

Compare variants

Values retain their source conditions and claim stage. A missing value means it has not been published in this catalogue.

Variant / model	Compensation axes	Dimensions	Extended locking force as reported	Flange interface	Mass	Details & evidence
LT-COMP-80Z-2	ZConfiguration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	105×105×65mmConfiguration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	1,520 kg (source unit)Configuration: LT-COMP-80Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass.	ISO 9409-1-80-6-M8Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	1.7 kgConfiguration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Dimensions 105×105×65mm Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 105×105×65mm Extended locking force as reported 1,520 kg (source unit) Manufacturer specification Configuration: LT-COMP-80Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时伸出时锁定力（kg） 1520 Flange interface ISO 9409-1-80-6-M8 Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-80-6-M8 Mass 1.7 kg Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 1.7 Minimum / rated / maximum pressure 0.3/0.6 MPa Manufacturer specification Configuration: LT-COMP-80Z-2; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010038 Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010038 Recommended handling mass 12 kg Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司建议搬运重量（kg） 12 Repeatability 0.02 mm Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.02 Retracted locking force as reported 1,140 kg (source unit) Manufacturer specification Configuration: LT-COMP-80Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时缩回时锁定力（kg） 1140 Z compensation range 10 mm Manufacturer specification Configuration: LT-COMP-80Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-2 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 10
LT-COMP-80Z-1	ZConfiguration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	105×105×65mmConfiguration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	1,500 kg (source unit)Configuration: LT-COMP-80Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass.	ISO 9409-1-80-6-M8Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	1.7 kgConfiguration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Dimensions 105×105×65mm Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 105×105×65mm Extended locking force as reported 1,500 kg (source unit) Manufacturer specification Configuration: LT-COMP-80Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时伸出时锁定力（kg） 1500 Flange interface ISO 9409-1-80-6-M8 Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-80-6-M8 Mass 1.7 kg Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 1.7 Minimum / rated / maximum pressure 0.3/0.6 MPa Manufacturer specification Configuration: LT-COMP-80Z-1; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010007 Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010007 Recommended handling mass 12 kg Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司建议搬运重量（kg） 12 Repeatability 0.02 mm Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.02 Retracted locking force as reported 1,160 kg (source unit) Manufacturer specification Configuration: LT-COMP-80Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时缩回时锁定力（kg） 1160 Z compensation range 10 mm Manufacturer specification Configuration: LT-COMP-80Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80Z-1 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 10
LT-COMP-80XY	XYConfiguration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Φ100×62mmConfiguration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	ISO 9409-1-80-6-M8Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified.	1.43 kgConfiguration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XY Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XY Dimensions Φ100×62mm Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 Φ100×62mm Flange interface ISO 9409-1-80-6-M8 Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-80-6-M8 Horizontal handling mass 10 kg Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 10 Mass 1.43 kg Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 1.43 Maximum locked load force 310 N Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司最大锁定负载力（N） 310 Maximum radial force during position memory 175 N Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司位置储存时最大径向力（N） 175 Maximum rotary moment during position memory 4 N·m Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司最大位置存储时旋转力矩（N.m） 4 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010006 Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010006 Position-memory piston force 590 N Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司位置存储活塞力（N） 590 Recommended handling mass for position memory 4 kg Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司建议位置存储的搬运重量（kg） 4 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Rotation angle ±16 ° Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司旋转角度（°） ±16 Vertical handling mass 15 kg Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 15 Xy compensation range ±4 mm Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±4 Xy locking force 610 N Manufacturer specification Configuration: LT-COMP-80XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-80XY 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 610
LT-COMP-63Z-2	ZConfiguration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	80×80×59.5mmConfiguration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	920 kg (source unit)Configuration: LT-COMP-63Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass.	ISO 9409-1-63-4-M6Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	1 kgConfiguration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Dimensions 80×80×59.5mm Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 80×80×59.5mm Extended locking force as reported 920 kg (source unit) Manufacturer specification Configuration: LT-COMP-63Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时伸出时锁定力（kg） 920 Flange interface ISO 9409-1-63-4-M6 Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-63-4-M6 Mass 1 kg Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 1 Minimum / rated / maximum pressure 0.3/0.6 MPa Manufacturer specification Configuration: LT-COMP-63Z-2; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010037 Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010037 Recommended handling mass 9 kg Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司建议搬运重量（kg） 9 Repeatability 0.02 mm Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.02 Retracted locking force as reported 590 kg (source unit) Manufacturer specification Configuration: LT-COMP-63Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时缩回时锁定力（kg） 590 Z compensation range 8 mm Manufacturer specification Configuration: LT-COMP-63Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-2 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 8
LT-COMP-63Z-1	ZConfiguration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	80×80×59.5mmConfiguration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	900 kg (source unit)Configuration: LT-COMP-63Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass.	ISO 9409-1-63-4-M6Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	1 kgConfiguration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Dimensions 80×80×59.5mm Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 80×80×59.5mm Extended locking force as reported 900 kg (source unit) Manufacturer specification Configuration: LT-COMP-63Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时伸出时锁定力（kg） 900 Flange interface ISO 9409-1-63-4-M6 Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-63-4-M6 Mass 1 kg Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 1 Minimum / rated / maximum pressure 0.3/0.6 MPa Manufacturer specification Configuration: LT-COMP-63Z-1; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010005 Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010005 Recommended handling mass 9 kg Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司建议搬运重量（kg） 9 Repeatability 0.02 mm Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.02 Retracted locking force as reported 630 kg (source unit) Manufacturer specification Configuration: LT-COMP-63Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时缩回时锁定力（kg） 630 Z compensation range 8 mm Manufacturer specification Configuration: LT-COMP-63Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63Z-1 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 8
LT-COMP-63XY	XYConfiguration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Φ80×55mmConfiguration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	ISO 9409-1-63-4-M6Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified.	0.82 kgConfiguration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XY Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XY Dimensions Φ80×55mm Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 Φ80×55mm Flange interface ISO 9409-1-63-4-M6 Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-63-4-M6 Horizontal handling mass 6 kg Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 6 Mass 0.82 kg Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 0.82 Maximum locked load force 200 N Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司最大锁定负载力（N） 200 Maximum radial force during position memory 70 N Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司位置储存时最大径向力（N） 70 Maximum rotary moment during position memory 1.7 N·m Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司最大位置存储时旋转力矩（N.m） 1.7 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010004 Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010004 Position-memory piston force 240 N Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司位置存储活塞力（N） 240 Recommended handling mass for position memory 1.8 kg Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司建议位置存储的搬运重量（kg） 1.8 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Rotation angle ±12 ° Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司旋转角度（°） ±12 Vertical handling mass 9 kg Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 9 Xy compensation range ±3 mm Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±3 Xy locking force 380 N Manufacturer specification Configuration: LT-COMP-63XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-63XY 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 380
LT-COMP-50Z-2	ZConfiguration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	64×64×53mmConfiguration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	530 kg (source unit)Configuration: LT-COMP-50Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass.	ISO 9409-1-50-4-M6Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	0.6 kgConfiguration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Dimensions 64×64×53mm Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 64×64×53mm Extended locking force as reported 530 kg (source unit) Manufacturer specification Configuration: LT-COMP-50Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时伸出时锁定力（kg） 530 Flange interface ISO 9409-1-50-4-M6 Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-50-4-M6 Mass 0.6 kg Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 0.6 Minimum / rated / maximum pressure 0.3/0.6 MPa Manufacturer specification Configuration: LT-COMP-50Z-2; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F2001003 Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司订货号 F2001003 Recommended handling mass 5 kg Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司建议搬运重量（kg） 5 Repeatability 0.02 mm Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.02 Retracted locking force as reported 260 kg (source unit) Manufacturer specification Configuration: LT-COMP-50Z-2; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时缩回时锁定力（kg） 260 Z compensation range 8 mm Manufacturer specification Configuration: LT-COMP-50Z-2; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-2 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 8
LT-COMP-50Z-1	ZConfiguration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	64×64×53mmConfiguration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	510 kg (source unit)Configuration: LT-COMP-50Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass.	ISO 9409-1-50-4-M6Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	0.6 kgConfiguration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Dimensions 64×64×53mm Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 64×64×53mm Extended locking force as reported 510 kg (source unit) Manufacturer specification Configuration: LT-COMP-50Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时伸出时锁定力（kg） 510 Flange interface ISO 9409-1-50-4-M6 Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-50-4-M6 Mass 0.6 kg Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 0.6 Minimum / rated / maximum pressure 0.3/0.6 MPa Manufacturer specification Configuration: LT-COMP-50Z-1; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010003 Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010003 Recommended handling mass 5 kg Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司建议搬运重量（kg） 5 Repeatability 0.02 mm Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.02 Retracted locking force as reported 280 kg (source unit) Manufacturer specification Configuration: LT-COMP-50Z-1; At 0.6 MPa. Source labels a locking force in kg; retained verbatim as an ambiguous source unit, not converted into N or asserted to be mass. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司 0.6MPa时缩回时锁定力（kg） 280 Z compensation range 8 mm Manufacturer specification Configuration: LT-COMP-50Z-1; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50Z-1 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 8
LT-COMP-50XY	XYConfiguration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Φ65×48mmConfiguration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	ISO 9409-1-50-4-M6Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified.	0.45 kgConfiguration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XY Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XY Dimensions Φ65×48mm Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司外形尺寸 Φ65×48mm Flange interface ISO 9409-1-50-4-M6 Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-50-4-M6 Horizontal handling mass 4 kg Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 4 Mass 0.45 kg Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 0.45 Maximum locked load force 130 N Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司最大锁定负载力（N） 130 Maximum radial force during position memory 40 N Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司位置储存时最大径向力（N） 40 Maximum rotary moment during position memory 1.2 N·m Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司最大位置存储时旋转力矩（N.m） 1.2 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010002 Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010002 Position-memory piston force 145 N Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司位置存储活塞力（N） 145 Recommended handling mass for position memory 1.5 kg Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司建议位置存储的搬运重量（kg） 1.5 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Rotation angle ±12 ° Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司旋转角度（°） ±12 Vertical handling mass 6 kg Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 6 Xy compensation range ±2.5 mm Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±2.5 Xy locking force 240 N Manufacturer specification Configuration: LT-COMP-50XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-50XY 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 240
LT-COMP-200Z	ZConfiguration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-200-6-M12Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified.	23.5 kgConfiguration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Flange interface ISO 9409-1-200-6-M12 Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-200-6-M12 Horizontal handling mass 140 kg Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 140 Mass 23.5 kg Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 23.5 Minimum / rated / maximum pressure 0.3/0.8 MPa Manufacturer specification Configuration: LT-COMP-200Z; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010035 Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010035 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 160 kg Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 160 Z compensation range 14 mm Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 14 Z locking force including spring force 3,176 N Manufacturer specification Configuration: LT-COMP-200Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200Z 浮动补偿单元 - 郑州领航机器人有限公司 Z向锁紧力（含弹簧力）(N) 3176
LT-COMP-200XYZ	XYZConfiguration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-200-6-M12Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	29.5 kgConfiguration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XYZ Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XYZ Flange interface ISO 9409-1-200-6-M12 Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-200-6-M12 Horizontal handling mass 100 kg Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 100 Mass 29.5 kg Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 29.5 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010031 Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010031 Position-memory piston cylinder thrust 3,835 N Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞气缸推力（N） 3835 Position-memory piston radial force 575 N Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞径向力(N) 575 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 160 kg Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 160 Xy compensation range ±12 mm Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±12 Xy locking force 2,787 N Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 2787 Z compensation range 14 mm Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 14 Z locking force including spring force 3,176 N Manufacturer specification Configuration: LT-COMP-200XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XYZ 浮动补偿单元 - 郑州领航机器人有限公司 Z向锁紧力（含弹簧力）(N) 3176
LT-COMP-200XY	XYConfiguration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-200-6-M12Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified.	21 kgConfiguration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XY Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XY Flange interface ISO 9409-1-200-6-M12 Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-200-6-M12 Horizontal handling mass 100 kg Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 100 Mass 21 kg Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 21 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010034 Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010034 Position-memory piston cylinder thrust 3,835 N Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞气缸推力（N） 3835 Position-memory piston radial force 575 N Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞径向力(N) 575 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 160 kg Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 160 Xy compensation range ±12 mm Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±12 Xy locking force 2,787 N Manufacturer specification Configuration: LT-COMP-200XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-200XY 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 2787
LT-COMP-160Z	ZConfiguration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-160-6-M10Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified.	11.8 kgConfiguration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Flange interface ISO 9409-1-160-6-M10 Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-160-6-M10 Horizontal handling mass 40 kg Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 40 Mass 11.8 kg Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 11.8 Minimum / rated / maximum pressure 0.3/0.8 MPa Manufacturer specification Configuration: LT-COMP-160Z; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010033 Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010033 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 60 kg Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 60 Z compensation range 14 mm Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 14 Z locking force including spring force 2,080 N Manufacturer specification Configuration: LT-COMP-160Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160Z 浮动补偿单元 - 郑州领航机器人有限公司 Z向锁紧力（含弹簧力）(N) 2080
LT-COMP-160XYZ	XYZConfiguration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-160-6-M10Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	14.5 kgConfiguration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XYZ Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XYZ Flange interface ISO 9409-1-160-6-M10 Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-160-6-M10 Horizontal handling mass 40 kg Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 40 Mass 14.5 kg Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 14.5 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010023 Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010023 Position-memory piston cylinder thrust 3,088 N Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞气缸推力（N） 3088 Position-memory piston radial force 463 N Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞径向力(N) 463 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 60 kg Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 60 Xy compensation range ±10 mm Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±10 Xy locking force 1,847 N Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 1847 Z compensation range 14 mm Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 14 Z locking force including spring force 2,080 N Manufacturer specification Configuration: LT-COMP-160XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XYZ 浮动补偿单元 - 郑州领航机器人有限公司 Z向锁紧力（含弹簧力）(N) 2080
LT-COMP-160XY	XYConfiguration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-160-6-M10Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified.	10.5 kgConfiguration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XY Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XY Flange interface ISO 9409-1-160-6-M10 Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-160-6-M10 Horizontal handling mass 40 kg Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 40 Mass 10.5 kg Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 10.5 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010032 Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010032 Position-memory piston cylinder thrust 3,088 N Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞气缸推力（N） 3088 Position-memory piston radial force 463 N Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞径向力(N) 463 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 60 kg Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 60 Xy compensation range ±10 mm Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±10 Xy locking force 1,847 N Manufacturer specification Configuration: LT-COMP-160XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-160XY 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 1847
LT-COMP-125Z	ZConfiguration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-125-6-M10Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified.	6 kgConfiguration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Flange interface ISO 9409-1-125-6-M10 Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-125-6-M10 Horizontal handling mass 11 kg Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 11 Mass 6 kg Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 6 Minimum / rated / maximum pressure 0.3/0.8 MPa Manufacturer specification Configuration: LT-COMP-125Z; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F200110029 Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司订货号 F200110029 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 18 kg Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 18 Z compensation range 12 mm Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 12 Z locking force including spring force 1,584 N Manufacturer specification Configuration: LT-COMP-125Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125Z 浮动补偿单元 - 郑州领航机器人有限公司 Z向锁紧力（含弹簧力）(N) 1584
LT-COMP-125XYZ	XYZConfiguration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-125-6-M10Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	7.4 kgConfiguration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XYZ Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XYZ Flange interface ISO 9409-1-125-6-M10 Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-125-6-M10 Horizontal handling mass 11 kg Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 11 Mass 7.4 kg Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 7.4 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010019 Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010019 Position-memory piston cylinder thrust 1,372 N Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞气缸推力（N） 1372 Position-memory piston radial force 205 N Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞径向力(N) 205 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 18 kg Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 18 Xy compensation range ±7 mm Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±7 Xy locking force 1,224 N Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 1224 Z compensation range 12 mm Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 12 Z locking force including spring force 1,584 N Manufacturer specification Configuration: LT-COMP-125XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XYZ 浮动补偿单元 - 郑州领航机器人有限公司 Z向锁紧力（含弹簧力）(N) 1584
LT-COMP-125XY	XYConfiguration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-125-6-M10Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified.	5.3 kgConfiguration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XY Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XY Flange interface ISO 9409-1-125-6-M10 Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-125-6-M10 Horizontal handling mass 11 kg Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 11 Mass 5.3 kg Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 5.3 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010030 Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010030 Position-memory piston cylinder thrust 1,372 N Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞气缸推力（N） 1372 Position-memory piston radial force 205 N Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞径向力(N) 205 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 18 kg Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 18 Xy compensation range ±7 mm Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±7 Xy locking force 1,224 N Manufacturer specification Configuration: LT-COMP-125XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-125XY 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 1224
LT-COMP-100Z	ZConfiguration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-100-6-M8Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified.	3.2 kgConfiguration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes Z Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 Z Flange interface ISO 9409-1-100-6-M8 Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-100-6-M8 Horizontal handling mass 5.5 kg Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 5.5 Mass 3.2 kg Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 3.2 Minimum / rated / maximum pressure 0.3/0.8 MPa Manufacturer specification Configuration: LT-COMP-100Z; Source gives only two numbers under a minimum/rated/maximum three-value heading; the missing association is unresolved. No separate pressure assignments inferred. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010028 Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010028 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 9 kg Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 9 Z compensation range 10 mm Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 10 Z locking force including spring force 871 N Manufacturer specification Configuration: LT-COMP-100Z; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100Z 浮动补偿单元 - 郑州领航机器人有限公司 Z向锁紧力（含弹簧力）(N) 871
LT-COMP-100XYZ	XYZConfiguration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-100-6-M8Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	3.6 kgConfiguration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XYZ Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XYZ Flange interface ISO 9409-1-100-6-M8 Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-100-6-M8 Horizontal handling mass 5.5 kg Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 5.5 Mass 3.6 kg Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 3.6 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010018 Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010018 Position-memory piston cylinder thrust 1,017 N Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞气缸推力（N） 1017 Position-memory piston radial force 152 N Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞径向力(N) 152 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 9 kg Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 9 Xy compensation range ±4 mm Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±4 Xy locking force 633 N Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 633 Z compensation range 10 mm Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司 Z补偿范围（mm） 10 Z locking force including spring force 871 N Manufacturer specification Configuration: LT-COMP-100XYZ; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XYZ 浮动补偿单元 - 郑州领航机器人有限公司 Z向锁紧力（含弹簧力）(N) 871
LT-COMP-100XY	XYConfiguration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Not published	Not published	ISO 9409-1-100-6-M8Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified.	2.6 kgConfiguration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Compensation axes XY Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司补偿方向 XY Flange interface ISO 9409-1-100-6-M8 Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司法兰接口 ISO 9409-1-100-6-M8 Horizontal handling mass 5.5 kg Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司水平搬运重量（kg） 5.5 Mass 2.6 kg Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司重量(kg) 2.6 Minimum / rated / maximum pressure 0.3/0.6/0.8 MPa Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司最小/额定/最大压力（MPa） 0.3/0.6/0.8 Operating ambient temperature +5/+60 °C Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司工作环境温度(℃) +5/+60 Order code F20010027 Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司订货号 F20010027 Position-memory piston cylinder thrust 1,017 N Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞气缸推力（N） 1017 Position-memory piston radial force 152 N Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司位置记忆活塞径向力(N) 152 Repeatability 0.1 mm Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司重复精度(mm) 0.1 Vertical handling mass 9 kg Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司垂直搬运重量（kg） 9 Xy compensation range ±4 mm Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司 XY补偿范围（mm） ±4 Xy locking force 633 N Manufacturer specification Configuration: LT-COMP-100XY; Manufacturer specification for this exact model; additional test conditions are not specified. LT-COMP-100XY 浮动补偿单元 - 郑州领航机器人有限公司 XY向锁紧力（N） 633

Related products

Looking up through a circular courtyard at modern glass towers and a blue sky.

Build connections across China’s robotics ecosystem.

Share your team background and technical or sourcing goals. We’ll check availability with relevant company representatives and coordinate the next steps.

How it works

How to initiate connections

Define your requirements

Select your target companies and dates, and share your team background and technical or sourcing goals.
We facilitate connections

We identify relevant company representatives, discuss your requirements and check availability.
Confirm your schedule

Review the proposed agenda, arrangements and fees, then confirm your schedule by email.

Connection details

What would you like to achieve through these connections? Tell us what your team is working on and what you hope to achieve. A product, location or target date can help us narrow down the options.

Contact details

Your name Work email

Company / organization Country / region

Company website (optional)

Your request goes to the Robotuo team. Privacy Policy

Robotics is better
in person.

Step inside a working showcase of robotics, from humanoids and helpful machines to the parts that bring them to life.

Book the visit experience Connect with the Robotics' Ecosystem

Visitors gather around a wheeled quadruped robot during a live demonstration at Robot Valley. — A front-row seat to robotics.Inside Robot Valley, Shenzhen

50+exhibiting companies

Hands-onrobot operation & live demos

~1 hourto explore, try, and ask

Sky decka new view of Shenzhen

Inside the showroom

One visit.
A whole world of robotics.

Explore complete machines, real-world applications, and the components behind them. Get a closer look at the variety on display.

A visitor posing beside a compact silver humanoid robot.

Interaction

Meet a humanoid

A first handshake. A playful boxing pose. See how robots move alongside us.

Yellow DEXFORCE robot behind its showroom service counter.

Service robots

Robots at your service

Discover a service robot in a shop-counter setting, with objects it can handle.

ASTRALL quadruped robots on display in Robot Valley.

Robot dogs

Four legs. New possibilities.

Take a closer look at robot dogs and the mechanics that keep them moving.

Close-up of a dexterous robotic hand on a display stand.

Dexterous hands

The detail is in the hands

Explore the dexterous hands that turn movement into precise manipulation.

A visitor standing next to a full-size LimX humanoid robot.

Humanoids

A full-body perspective

Get close to the joints, sensors, and structure of a full-size humanoid.

Blue exhibition booths displaying wearable exoskeletons and compact robots.

Wearable robotics

Technology you can wear

Discover wearable assistance alongside robots built for very different environments.

Automated cooking robot with a stainless-steel wok, ingredient dispensers, and touchscreen controls.

Real-world applications

From the lab to daily life

Explore practical applications, including automated cooking and everyday services.

Robotics components arranged on a showroom demonstration counter.

Core components

What makes a robot work?

Look beyond the body to the components and engineering that make it possible.

A glimpse of what’s inside. Exhibits and live demonstrations may vary by visit.

The blue Robot Valley entrance sculpture inside the real showroom.

More than a display

Watch it move.
Then have a go.

The best questions come when you’re standing right beside a robot. A guided visit brings the hardware, the demonstrations, and the conversation together.

01
Get your bearings
Follow the showroom route and discover how different robots are used.
02
Try robot operation
Get hands-on with selected robots through guided interaction.
03
Keep the conversation going
Ask about the technology, share your interests, and explore what comes next.

Book the visit experience

Beyond the showroom

Step outside.
See the bigger picture.

The sky deck opens onto Shenzhen’s skyline and surrounding mountains. Take in the place where robotics companies, researchers, and makers are building what comes next.

A guide points out the city to visitors on the glass-railed Robot Valley sky deck. — A different perspective on Robot Valley.

An international university group gathers on the timber sky deck with the Shenzhen skyline behind them. — New connections, with a view.

Curiosity brings us together

Come with questions.
Leave with possibilities.

For the simply curious, the people building, and the teams exploring their next idea. Robot Valley is a place to see the technology and talk about where it could go.

Curious visitorsStudents & researchersBuilders & foundersCompany teams

An audience of international visitors listens to a presentation inside Robot Valley. — Ideas are better when they’re shared.

Plan your visit

A little planning.
A lot to discover.

Where: Nanshan, Shenzhen, China
Allow: Approximately one hour
Booking: By appointment

Choose your preferred date and group size on the booking page. The team will confirm the arrangements with you.

What’s included in the visit?

A guided showroom experience with hands-on robot operation and interactive demonstrations. You’ll have time to ask questions and explore the exhibits. Specific robots and activities depend on the day’s arrangements.

Do I need to book in advance?

Yes. Visits are by appointment. Use the booking page to choose your preferred date and share your group details. The team will confirm availability, fees, and arrangements before your visit.

Can I bring a team or student group?

Tell us your group size and interests when booking. Company teams, students, researchers, and other groups can discuss their priorities with the team before the visit.

Can we focus on a particular technology?

Share the robots, applications, or components you’re interested in with your booking request. The team can discuss what’s available and suitable for your visit.

Something else on your mind? info@robotuo.com

Your next encounter with robotics

Come curious.
Leave inspired.

Book the visit experience

Real robots. Real conversations.
See you in Shenzhen.

Visitors posing together at the Robot Valley showroom

About Robotuo

Connecting the world to China’s robotics ecosystem.

Get closer to the people, technology, and opportunities shaping robotics in China.

Connect Visit Robot Valley

Local knowledge / Firsthand insight / Global reach

About us

Build in China.
Reach the world.

We connect global teams with China’s robotics supply chain and the SZ RoboX open-source community to find partners, share expertise, and bring robotics to new markets.

For companies, developers, and entrepreneurs building what comes next in robotics.

Companies in our network: 500+
International visits hosted: 200+
Countries & regions: 30+

A robot drive component on display at Robot Valley

Robotics supply chain

Access robotics, AI hardware, and component suppliers in China. Find partners that fit your business.

A visitor shaking hands with a Robotuo robot during a guided visit

Firsthand partnerships

Understand Chinese businesses, explore technical capabilities, and find opportunities for collaboration.

Developers and entrepreneurs at a MakerMods and SZ RoboX community event

Global Connections, Backed by Experience

With over 1,000 business visitors and buyers served across more than 20 countries and regions, we draw on international experience to connect teams with robotics industry resources.

OUR MISSION

Turn shared knowledge into real-world robotics.

We combine supply chain integration and open-source deployment standards to support robotics applications worldwide.

Connect

For Companies

Bring Open-Source Innovation into Practice

We combine supply chain integration with the development of open-source deployment standards, connecting technology and hardware resources to support robotics applications worldwide.

Robotics sensors and drive components displayed at Robot Valley

For Developers & Entrepreneurs

Find Your Community. Discover New Opportunities.

Join the SZ RoboX open-source robotics community to exchange technical knowledge with developers and entrepreneurs, follow global industry developments, and explore opportunities to innovate and collaborate.

International visitors exchanging ideas around a Robotuo robot demonstration

YOUR PRIVACY

Privacy Policy.

How this website uses information, and the choices you can make.

About this policy

Last updated: 23 September 2026.

Robotuo is responsible for the personal information processed through this website.

This policy covers browsing Robotuo, local preferences, and our planned use of Google Analytics through Firebase and OneSignal web push notifications. These optional services only run when enabled on the site and you have agreed to the relevant category.

Browsing and essential information

You can browse without an account or agreeing to optional services. Our hosting provider receives your IP address, requested URL, browser information, and request time to deliver and protect the site. Our basis for this processing is our legitimate interest in operating a secure, reliable website.

We store your privacy choices in this browser so we can respect them. This essential preference includes the policy version, your choices, and when you made them; it is not sent to an analytics service. Hosting and security logs are separate from these browser settings.

Saved comparisons and follows

With your consent, “Remember my selections” stores comparisons and followed companies and products in this browser. These are not synced to an account or shared with Google or OneSignal by our integration. Without consent, these features still work for the current page session.

Turning this option off deletes saved selections from local storage. Current selections remain in memory until you reload or close the page.

Google Analytics through Firebase

With analytics consent, we use the Google Analytics web stream linked to our Firebase project to understand which parts of Robotuo are used and improve the website. Google processes online identifiers, cookie identifiers, browser and device information, general page categories, and usage events. IP addresses are used by Google during collection, including to derive approximate location.

Our integration uses general page categories rather than search terms, full query strings, or individual company and product identifiers. With analytics consent, we also measure visits attributed to recognized AI services and confirmed Connect requests from those visits. We send a fixed provider label and page category, without sending the original referral URL or form contents. Attribution lasts only within the current page session and may be incomplete. We do not send application form contents, names, or email addresses to Analytics. Advertising consent remains off; Google signals and advertising personalization are disabled in our integration.

The Google tag is not loaded before analytics consent. Declining analytics does not enable cookieless analytics pings. Learn more in Google’s Privacy Policy and Firebase’s privacy information.

OneSignal notifications

With notification consent, OneSignal helps us deliver Robotuo news and updates. It processes subscription and device identifiers, push tokens, browser and operating system information, IP address, language, and notification delivery and interaction information. This service may use browser storage and a service worker to deliver notifications even when the website is closed.

Saving consent does not grant browser permission. Open Privacy settings, save your notification choice, then select “Enable notifications” and allow notifications in your browser if prompted. You can withdraw consent here or block notifications in your browser’s site settings.

Withdrawal disables further SDK data collection and attempts to unsubscribe this browser from push messages. It does not automatically erase information already held by OneSignal. See OneSignal’s Privacy Policy.

Cookies, storage, and retention

Our essential robotuo-privacy record is kept in local storage and is valid for 180 days. We ask again when it expires or the consent version changes. Saved selections use robotuo-compare, robotuo-catalog-follows, robotuo-product-follows, and robotuo-follow-labels; they stay until you withdraw that choice, your consent expires, or you clear site data.

When analytics is enabled with consent, Google uses cookies such as _ga and _ga_*. Our integration limits these cookies to 180 days without automatic renewal. Withdrawing analytics consent disables collection and removes accessible Analytics cookies for this site. Cookie expiry is separate from the retention of data already received by Google.

OneSignal stores subscription information in browser storage and its service worker. Vendor-held records and hosting logs follow the retention settings and obligations applicable to those services; withdrawing consent does not itself delete previously collected records. You can request erasure where applicable.

Your choices and rights

Use “Reject all,” “Accept all,” or individual choices in Privacy settings. Optional categories are off by default. Closing settings or continuing to browse does not give consent. The Privacy settings button is available in the footer throughout the site. Withdrawing consent is as easy as giving it and does not affect the lawfulness of processing before withdrawal.

Where the GDPR or UK GDPR applies, you may request access, correction, erasure, restriction, or portability of your personal information and object to processing based on legitimate interests. You may complain to your local data protection authority. We normally respond to rights requests within one month, subject to applicable extensions and identity verification.

Privacy contact details will be published before optional services are activated.

Clearing browser data resets these choices. To stop push notifications, also disable notification permission in your browser; clearing site data alone may not withdraw permission. Choices apply to this browser, not every device you use.

Service providers and international processing

Our hosting provider, Google, OneSignal, and the browser’s push delivery provider may process technical information needed for their respective services. Processing may take place outside your country, including in the United States. Where required, transfers need appropriate safeguards, such as applicable adequacy decisions or standard contractual clauses. You may request information about safeguards that apply to your data.

Saved selections, analytics, and notification processing rely on your consent. We do not sell the information collected through these features or use it for advertising in this integration.

Search, applications, and external websites

Search terms filter content in your browser and may appear in the page URL. Avoid entering sensitive information into search. Application and issue-report drafts stay in this page until you choose Send. Sending shares the information you entered and the relevant page with Robotuo through our hosting provider and Feishu, where our team reviews it and follows up. Do not include sensitive personal information. These submissions work independently of optional analytics and notification preferences.

To limit repeated requests, our server processes your IP address and stores a keyed hash with short-lived counters. When deployed with our shared Upstash Redis store, it stores these hashes, submission identifiers and delivery state for up to 24 hours; form contents are not stored there. Application and report records remain in Feishu for team review and follow-up. Contact Robotuo about access or deletion using the contact information in this policy.

Reloading or closing the page clears unsent drafts. Visit previews do not send a booking. Company websites and the Robot Valley booking page are separate websites with their own privacy practices. Review their policies before submitting personal details.

About this product family

Compare variants

Specifications & evidence

Compensation axes

Dimensions

Extended locking force as reported

Flange interface

Mass

Minimum / rated / maximum pressure

Operating ambient temperature

Order code

Recommended handling mass

Repeatability

Retracted locking force as reported

Z compensation range

Specifications & evidence

Compensation axes

Dimensions

Extended locking force as reported

Flange interface

Mass

Minimum / rated / maximum pressure

Operating ambient temperature

Order code

Recommended handling mass

Repeatability

Retracted locking force as reported

Z compensation range

Specifications & evidence

Compensation axes

Dimensions

Flange interface

Horizontal handling mass

Mass

Maximum locked load force

Maximum radial force during position memory

Maximum rotary moment during position memory

Minimum / rated / maximum pressure

Operating ambient temperature

Order code

Position-memory piston force

Recommended handling mass for position memory

Repeatability

Rotation angle

Vertical handling mass

Xy compensation range

Xy locking force

Specifications & evidence

Compensation axes

Dimensions

Extended locking force as reported

Flange interface

Mass

Minimum / rated / maximum pressure

Operating ambient temperature

Order code

Recommended handling mass

Repeatability

Retracted locking force as reported

Z compensation range

Specifications & evidence

Compensation axes

Dimensions

Extended locking force as reported

Flange interface

Mass

Minimum / rated / maximum pressure

Operating ambient temperature

Order code

Recommended handling mass

Repeatability

Retracted locking force as reported

Z compensation range

Specifications & evidence

Compensation axes

Dimensions

Flange interface

Horizontal handling mass

Mass

Maximum locked load force