Product family

LT-PG2

48 variants · Varies by size, stroke, closing force, opening force, force retention

About this product family

The manufacturer selection table lists the LT-PG2 two-finger parallel grippers with multi-tooth guides across sizes, A/B stroke configurations where offered, and standard/CFM/OFM force configurations. Consolidate the smaller organizational groups while retaining every exact product and its own specifications.

Compare variants

Values retain their source conditions and claim stage. A missing value means it has not been published in this catalogue.

Variant / model	Air consumption per double stroke	Ingress protection	Mass	Maximum air pressure	Maximum axial force fz	Details & evidence
LT-PG2-80B-OFM	40 cm³Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.61 kgConfiguration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1,500 NConfiguration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 40 cm³ Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 40.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.61 kg Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.61 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 1,500 N Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 1500 Maximum finger length 100 mm Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 100 Maximum finger mass 0.6 kg Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 0.6 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 315 N Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 315 Moment mx 60 N·m Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 60 Moment my 95 N·m Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 95 Moment mz 55 N·m Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 55 Opening / closing time 0.03/0.05 s Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.03/0.05 Opening force 1,295 N Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 1295 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040009 LT-PG2-80B-OFM 4.00 / 1295 315 4.30 5℃~90℃ 查看详情>> Order code F11040009 Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040009 LT-PG2-80B-OFM 4.00 / 1295 315 4.30 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 4.3 kg Manufacturer specification Configuration: LT-PG2-80B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 4.3 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 4 mm Manufacturer specification Configuration: LT-PG2-80B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 4
LT-PG2-80B-CFM	35 cm³Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.63 kgConfiguration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1,500 NConfiguration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 35 cm³ Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 35.0 Closing force 1,178 N Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 1178 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.63 kg Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.63 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 1,500 N Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 1500 Maximum finger length 100 mm Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 100 Maximum finger mass 0.6 kg Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 0.6 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 315 N Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 315 Moment mx 60 N·m Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 60 Moment my 95 N·m Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 95 Moment mz 55 N·m Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 55 Opening / closing time 0.05/0.03 s Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.05/0.03 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040008 LT-PG2-80B-CFM 4.00 1178 / 315 4.30 5℃~90℃ 查看详情>> Order code F11040008 Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040008 LT-PG2-80B-CFM 4.00 1178 / 315 4.30 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 4.3 kg Manufacturer specification Configuration: LT-PG2-80B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 4.3 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 4 mm Manufacturer specification Configuration: LT-PG2-80B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 4
LT-PG2-80B	22 cm³Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.52 kgConfiguration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified.	1,500 NConfiguration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 22 cm³ Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 22.0 Closing force 865 N Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 865 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.52 kg Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.52 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 1,500 N Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 1500 Maximum finger length 105 mm Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 105 Maximum finger mass 0.6 kg Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 0.6 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 60 N·m Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 60 Moment my 95 N·m Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 95 Moment mz 55 N·m Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 55 Opening / closing time 0.04/0.04 s Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.04/0.04 Opening force 980 N Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 980 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040005 LT-PG2-80B 4.00 865 980 / 4.30 5℃~90℃ 查看详情>> Order code F11040005 Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040005 LT-PG2-80B 4.00 865 980 / 4.30 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 4.3 kg Manufacturer specification Configuration: LT-PG2-80B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 4.3 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 4 mm Manufacturer specification Configuration: LT-PG2-80B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80B 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 4
LT-PG2-80A-OFM	40 cm³Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.59 kgConfiguration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1,500 NConfiguration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 40 cm³ Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 40.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.59 kg Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.59 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 1,500 N Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 1500 Maximum finger length 105 mm Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 105 Maximum finger mass 0.6 kg Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 0.6 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 150 N Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 150 Moment mx 60 N·m Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 60 Moment my 95 N·m Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 95 Moment mz 55 N·m Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 55 Opening / closing time 0.03/0.05 s Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.03/0.05 Opening force 650 N Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 650 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040003 LT-PG2-80A-OFM 8.00 / 650 150 2.20 5℃~90℃ 查看详情>> Order code F11040003 Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040003 LT-PG2-80A-OFM 8.00 / 650 150 2.20 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 2.2 kg Manufacturer specification Configuration: LT-PG2-80A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 2.2 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 8 mm Manufacturer specification Configuration: LT-PG2-80A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 8
LT-PG2-80A-CFM	35 cm³Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.61 kgConfiguration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1,500 NConfiguration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 35 cm³ Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 35.0 Closing force 590 N Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 590 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.61 kg Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.61 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 1,500 N Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 1500 Maximum finger length 105 mm Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 105 Maximum finger mass 0.6 kg Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 0.6 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 150 N Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 150 Moment mx 60 N·m Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 60 Moment my 95 N·m Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 95 Moment mz 55 N·m Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 55 Opening / closing time 0.05/0.03 s Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.05/0.03 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040002 LT-PG2-80A-CFM 8.00 590 / 150 2.20 5℃~90℃ 查看详情>> Order code F11040002 Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040002 LT-PG2-80A-CFM 8.00 590 / 150 2.20 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 2.2 kg Manufacturer specification Configuration: LT-PG2-80A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 2.2 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 8 mm Manufacturer specification Configuration: LT-PG2-80A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 8
LT-PG2-80A	22 cm³Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.5 kgConfiguration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified.	1,500 NConfiguration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 22 cm³ Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 22.0 Closing force 440 N Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 440 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.5 kg Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.5 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 1,500 N Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 1500 Maximum finger length 110 mm Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 110 Maximum finger mass 0.6 kg Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 0.6 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 60 N·m Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 60 Moment my 95 N·m Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 95 Moment mz 55 N·m Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 55 Opening / closing time 0.04/0.04 s Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.04/0.04 Opening force 500 N Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 500 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040001 LT-PG2-80A 8.00 440 500 / 2.20 5℃~90℃ 查看详情>> Order code F11040001 Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11040001 LT-PG2-80A 8.00 440 500 / 2.20 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 2.2 kg Manufacturer specification Configuration: LT-PG2-80A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 2.2 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 8 mm Manufacturer specification Configuration: LT-PG2-80A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-80A 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 8
LT-PG2-380B-OFM	3,170 cm³Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	31.5 kgConfiguration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	10,000 NConfiguration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 3,170 cm³ Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 3170.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 31.5 kg Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司自重(kg) 31.5 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 10,000 N Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司最大轴向力Fz(N) 10000 Maximum finger length 300 mm Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司手指最大长度(mm) 300 Maximum finger mass 17 kg Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司手指最大重量(kg) 17 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 7,200 N Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-380B-OFM - 郑州领航机器人有限公司最小保持力(N) 7200 Moment mx 560 N·m Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司力矩Mx(N·m) 560 Moment my 560 N·m Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司力矩My(N·m) 560 Moment mz 370 N·m Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司力矩Mz(N·m) 370 Opening / closing time 0.5/0.8 s Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司开/合时间(s) 0.5/0.8 Opening force 24,660 N Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司张开力(N) 24660 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110006 LT-PG2-380B-OFM 26.00 / 24660 7200 82.50 5℃~90℃ 查看详情>> Order code F11110006 Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110006 LT-PG2-380B-OFM 26.00 / 24660 7200 82.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 82.5 kg Manufacturer specification Configuration: LT-PG2-380B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-380B-OFM - 郑州领航机器人有限公司建议工件重量（kg)① 82.5 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 26 mm Manufacturer specification Configuration: LT-PG2-380B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-OFM - 郑州领航机器人有限公司单指行程(mm) 26
LT-PG2-380B-CFM	2,700 cm³Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	32 kgConfiguration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	10,000 NConfiguration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 2,700 cm³ Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 2700.0 Closing force 23,750 N Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司闭合力(N) 23750 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司防护等级（IP） ip40 Mass 32 kg Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司自重(kg) 32 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 10,000 N Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司最大轴向力Fz(N) 10000 Maximum finger length 300 mm Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司手指最大长度(mm) 300 Maximum finger mass 17 kg Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司手指最大重量(kg) 17 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 7,200 N Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-380B-CFM - 郑州领航机器人有限公司最小保持力(N) 7200 Moment mx 560 N·m Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司力矩Mx(N·m) 560 Moment my 560 N·m Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司力矩My(N·m) 560 Moment mz 370 N·m Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司力矩Mz(N·m) 370 Opening / closing time 0.8/0.4 s Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司开/合时间(s) 0.8/0.4 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110005 LT-PG2-380B-CFM 26.00 23750 / 7200 82.50 5℃~90℃ 查看详情>> Order code F11110005 Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110005 LT-PG2-380B-CFM 26.00 23750 / 7200 82.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 82.5 kg Manufacturer specification Configuration: LT-PG2-380B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-380B-CFM - 郑州领航机器人有限公司建议工件重量（kg)① 82.5 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 26 mm Manufacturer specification Configuration: LT-PG2-380B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B-CFM - 郑州领航机器人有限公司单指行程(mm) 26
LT-PG2-380B	2,280 cm³Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified.	27 kgConfiguration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified.	10,000 NConfiguration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 2,280 cm³ Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司耗气量(cm3)(双程) 2280.0 Closing force 16,550 N Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司闭合力(N) 16550 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 27 kg Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司自重(kg) 27 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 10,000 N Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司最大轴向力Fz(N) 10000 Maximum finger length 350 mm Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司手指最大长度(mm) 350 Maximum finger mass 17 kg Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司手指最大重量(kg) 17 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 560 N·m Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司力矩Mx(N·m) 560 Moment my 560 N·m Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司力矩My(N·m) 560 Moment mz 370 N·m Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司力矩Mz(N·m) 370 Opening / closing time 2.2/2.2 s Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司开/合时间(s) 2.2/2.2 Opening force 17,460 N Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司张开力(N) 17460 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110004 LT-PG2-380B 26.00 16550 17460 / 82.50 5℃~90℃ 查看详情>> Order code F11110004 Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110004 LT-PG2-380B 26.00 16550 17460 / 82.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 82.5 kg Manufacturer specification Configuration: LT-PG2-380B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-380B - 郑州领航机器人有限公司建议工件重量（kg)① 82.5 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 26 mm Manufacturer specification Configuration: LT-PG2-380B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380B - 郑州领航机器人有限公司单指行程(mm) 26
LT-PG2-380A-OFM	3,170 cm³Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	30.5 kgConfiguration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	10,000 NConfiguration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 3,170 cm³ Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 3170.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 30.5 kg Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司自重(kg) 30.5 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 10,000 N Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司最大轴向力Fz(N) 10000 Maximum finger length 350 mm Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司手指最大长度(mm) 350 Maximum finger mass 17 kg Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司手指最大重量(kg) 17 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 4,200 N Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-380A-OFM - 郑州领航机器人有限公司最小保持力(N) 4200 Moment mx 560 N·m Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司力矩Mx(N·m) 560 Moment my 560 N·m Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司力矩My(N·m) 560 Moment mz 370 N·m Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司力矩Mz(N·m) 370 Opening / closing time 0.8/0.5 s Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司开/合时间(s) 0.8/0.5 Opening force 14,360 N Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司张开力(N) 14360 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110003 LT-PG2-380A-OFM 45.00 / 14360 4200 48.00 5℃~90℃ 查看详情>> Order code F11110003 Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110003 LT-PG2-380A-OFM 45.00 / 14360 4200 48.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 48 kg Manufacturer specification Configuration: LT-PG2-380A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-380A-OFM - 郑州领航机器人有限公司建议工件重量（kg)① 48 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 45 mm Manufacturer specification Configuration: LT-PG2-380A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-OFM - 郑州领航机器人有限公司单指行程(mm) 45
LT-PG2-380A-CFM	2,700 cm³Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	31 kgConfiguration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	10,000 NConfiguration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 2,700 cm³ Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 2700.0 Closing force 13,830 N Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司闭合力(N) 13830 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 31 kg Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司自重(kg) 31 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 10,000 N Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司最大轴向力Fz(N) 10000 Maximum finger length 350 mm Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司手指最大长度(mm) 350 Maximum finger mass 17 kg Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司手指最大重量(kg) 17 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 4,200 N Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-380A-CFM - 郑州领航机器人有限公司最小保持力(N) 4200 Moment mx 560 N·m Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司力矩Mx(N·m) 560 Moment my 560 N·m Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司力矩My(N·m) 560 Moment mz 370 N·m Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司力矩Mz(N·m) 370 Opening / closing time 0.5/0.8 s Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司开/合时间(s) 0.5/0.8 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110002 LT-PG2-380A-CFM 45.00 13830 / 4200 48.00 5℃~90℃ 查看详情>> Order code F11110002 Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110002 LT-PG2-380A-CFM 45.00 13830 / 4200 48.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 48 kg Manufacturer specification Configuration: LT-PG2-380A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-380A-CFM - 郑州领航机器人有限公司建议工件重量（kg)① 48 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 45 mm Manufacturer specification Configuration: LT-PG2-380A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A-CFM - 郑州领航机器人有限公司单指行程(mm) 45
LT-PG2-380A	2,280 cm³Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified.	26 kgConfiguration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified.	10,000 NConfiguration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 2,280 cm³ Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司耗气量(cm3)(双程) 2280.0 Closing force 9,630 N Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司闭合力(N) 9630 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 26 kg Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司自重(kg) 26 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 10,000 N Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司最大轴向力Fz(N) 10000 Maximum finger length 400 mm Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司手指最大长度(mm) 400 Maximum finger mass 17 kg Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司手指最大重量(kg) 17 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 560 N·m Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司力矩Mx(N·m) 560 Moment my 560 N·m Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司力矩My(N·m) 560 Moment mz 370 N·m Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司力矩Mz(N·m) 370 Opening / closing time 0.6/0.6 s Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司开/合时间(s) 0.6/0.6 Opening force 10,160 N Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司张开力(N) 10160 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110001 LT-PG2-380A 45.00 9630 10160 / 48.00 5℃~90℃ 查看详情>> Order code F11110001 Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11110001 LT-PG2-380A 45.00 9630 10160 / 48.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 48 kg Manufacturer specification Configuration: LT-PG2-380A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-380A - 郑州领航机器人有限公司建议工件重量（kg)① 48 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 45 mm Manufacturer specification Configuration: LT-PG2-380A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-380A - 郑州领航机器人有限公司单指行程(mm) 45
LT-PG2-300B-OFM	1,560 cm³Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	15.8 kgConfiguration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	8,000 NConfiguration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 1,560 cm³ Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 1560.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 15.8 kg Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 15.8 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 8,000 N Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 8000 Maximum finger length 250 mm Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 250 Maximum finger mass 11.5 kg Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 11.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 2,400 N Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 2400 Moment mx 400 N·m Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 400 Moment my 400 N·m Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 400 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.4/0.7 s Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.4/0.7 Opening force 12,760 N Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 12760 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100007 LT-PG2-300B-OFM 20.00 / 12760 2400 49.50 5℃~90℃ 查看详情>> Order code F11100007 Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100007 LT-PG2-300B-OFM 20.00 / 12760 2400 49.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 49.5 kg Manufacturer specification Configuration: LT-PG2-300B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 49.5 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 20 mm Manufacturer specification Configuration: LT-PG2-300B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 20
LT-PG2-300B-CFM	1,300 cm³Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	16.1 kgConfiguration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	8,000 NConfiguration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 1,300 cm³ Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 1300.0 Closing force 12,330 N Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 12330 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 16.1 kg Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 16.1 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 8,000 N Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 8000 Maximum finger length 250 mm Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 250 Maximum finger mass 11.5 kg Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 11.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 2,400 N Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 2400 Moment mx 400 N·m Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 400 Moment my 400 N·m Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 400 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.7/0.4 s Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.7/0.4 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100006 LT-PG2-300B-CFM 20.00 12330 / 2400 49.50 5℃~90℃ 查看详情>> Order code F11100006 Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100006 LT-PG2-300B-CFM 20.00 12330 / 2400 49.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 49.5 kg Manufacturer specification Configuration: LT-PG2-300B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 49.5 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 20 mm Manufacturer specification Configuration: LT-PG2-300B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 20
LT-PG2-300B	1,040 cm³Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified.	13.7 kgConfiguration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified.	8,000 NConfiguration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 1,040 cm³ Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 1040.0 Closing force 9,930 N Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 9930 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 13.7 kg Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 13.7 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 8,000 N Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 8000 Maximum finger length 300 mm Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 300 Maximum finger mass 11.5 kg Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 11.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 400 N·m Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 400 Moment my 400 N·m Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 400 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.5/0.5 s Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.5/0.5 Opening force 10,360 N Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 10360 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100005 LT-PG2-300B 20.00 9930 10360 / 49.50 5℃~90℃ 查看详情>> Order code F11100005 Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100005 LT-PG2-300B 20.00 9930 10360 / 49.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 49.5 kg Manufacturer specification Configuration: LT-PG2-300B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 49.5 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 20 mm Manufacturer specification Configuration: LT-PG2-300B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300B 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 20
LT-PG2-300A-OFM	1,560 cm³Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	15.3 kgConfiguration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	8,000 NConfiguration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 1,560 cm³ Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 1560.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 15.3 kg Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 15.3 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 8,000 N Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 8000 Maximum finger length 300 mm Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 300 Maximum finger mass 11.5 kg Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 11.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,410 N Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1410 Moment mx 400 N·m Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 400 Moment my 400 N·m Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 400 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.4/0.7 s Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.4/0.7 Opening force 7,440 N Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 7440 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100003 LT-PG2-300A-OFM 35.00 / 7440 1410 29.00 5℃~90℃ 查看详情>> Order code F11100003 Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100003 LT-PG2-300A-OFM 35.00 / 7440 1410 29.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 29 kg Manufacturer specification Configuration: LT-PG2-300A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 29 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 35 mm Manufacturer specification Configuration: LT-PG2-300A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 35
LT-PG2-300A-CFM	1,300 cm³Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	15.6 kgConfiguration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	8,000 NConfiguration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 1,300 cm³ Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 1300.0 Closing force 7,190 N Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 7190 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 15.6 kg Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 15.6 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 8,000 N Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 8000 Maximum finger length 300 mm Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 300 Maximum finger mass 11.5 kg Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 11.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,410 N Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1410 Moment mx 400 N·m Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 400 Moment my 400 N·m Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 400 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.7/0.4 s Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.7/0.4 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100002 LT-PG2-300A-CFM 35.00 7190 / 1410 29.00 5℃~90℃ 查看详情>> Order code F11100002 Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100002 LT-PG2-300A-CFM 35.00 7190 / 1410 29.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 29 kg Manufacturer specification Configuration: LT-PG2-300A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 29 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 35 mm Manufacturer specification Configuration: LT-PG2-300A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 35
LT-PG2-300A	1,040 cm³Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified.	13.2 kgConfiguration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified.	8,000 NConfiguration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 1,040 cm³ Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 1040.0 Closing force 5,780 N Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 5780 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 13.2 kg Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 13.2 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 8,000 N Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 8000 Maximum finger length 350 mm Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 350 Maximum finger mass 11.5 kg Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 11.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 400 N·m Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 400 Moment my 400 N·m Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 400 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.5/0.5 s Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.5/0.5 Opening force 6,030 N Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 6030 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100001 LT-PG2-300A 35.00 5780 6030 / 29.00 5℃~90℃ 查看详情>> Order code F11100001 Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11100001 LT-PG2-300A 35.00 5780 6030 / 29.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 29 kg Manufacturer specification Configuration: LT-PG2-300A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 29 Repeatability 0.05 mm Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.05 Single-finger stroke 35 mm Manufacturer specification Configuration: LT-PG2-300A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-300A 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 35
LT-PG2-240B-OFM	1,000 cm³Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	10 kgConfiguration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	6,200 NConfiguration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 1,000 cm³ Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 1000.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 10 kg Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 10 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 6,200 N Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 6200 Maximum finger length 240 mm Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 240 Maximum finger mass 8.5 kg Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 8.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,900 N Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1900 Moment mx 260 N·m Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 260 Moment my 160 N·m Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 160 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.35/0.65 s Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.35/0.65 Opening force 9,670 N Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 9670 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090008 LT-PG2-240B-OFM 17.00 / 9670 1900 37.00 5℃~90℃ 查看详情>> Order code F11090008 Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090008 LT-PG2-240B-OFM 17.00 / 9670 1900 37.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 37 kg Manufacturer specification Configuration: LT-PG2-240B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 37 Repeatability 0.04 mm Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.04 Single-finger stroke 17 mm Manufacturer specification Configuration: LT-PG2-240B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 17
LT-PG2-240B-CFM	800 cm³Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	10.3 kgConfiguration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.6 MPaConfiguration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	6,200 NConfiguration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 800 cm³ Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 800.0 Closing force 9,290 N Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 9290 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 10.3 kg Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 10.3 Maximum air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.6 Maximum axial force fz 6,200 N Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 6200 Maximum finger length 240 mm Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 240 Maximum finger mass 8.5 kg Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 8.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,900 N Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1900 Moment mx 260 N·m Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 260 Moment my 160 N·m Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 160 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.65/0.35 s Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.65/0.35 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090007 LT-PG2-240B-CFM 17.00 9290 / 1900 37.00 5℃~90℃ 查看详情>> Order code F11090007 Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090007 LT-PG2-240B-CFM 17.00 9290 / 1900 37.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 37 kg Manufacturer specification Configuration: LT-PG2-240B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 37 Repeatability 0.04 mm Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.04 Single-finger stroke 17 mm Manufacturer specification Configuration: LT-PG2-240B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 17
LT-PG2-240B	650 cm³Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified.	8.2 kgConfiguration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified.	6,200 NConfiguration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 650 cm³ Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 650.0 Closing force 7,390 N Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 7390 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 8.2 kg Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 8.2 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 6,200 N Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 6200 Maximum finger length 280 mm Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 280 Maximum finger mass 8.5 kg Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 8.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 260 N·m Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 260 Moment my 160 N·m Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 160 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.45/0.45 s Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.45/0.45 Opening force 7,770 N Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 7770 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090006 LT-PG2-240B 17.00 7390 7770 / 37.00 5℃~90℃ 查看详情>> Order code F11090006 Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090006 LT-PG2-240B 17.00 7390 7770 / 37.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 37 kg Manufacturer specification Configuration: LT-PG2-240B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 37 Repeatability 0.04 mm Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.04 Single-finger stroke 17 mm Manufacturer specification Configuration: LT-PG2-240B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240B 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 17
LT-PG2-240A-OFM	1,000 cm³Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	9.7 kgConfiguration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	6,200 NConfiguration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 1,000 cm³ Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 1000.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 9.7 kg Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 9.7 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 6,200 N Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 6200 Maximum finger length 280 mm Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 280 Maximum finger mass 8.5 kg Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 8.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,080 N Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1080 Moment mx 260 N·m Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 260 Moment my 160 N·m Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 160 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.35/0.65 s Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.35/0.65 Opening force 5,600 N Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 5600 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090004 LT-PG2-240A-OFM 30.00 / 5600 1080 21.50 5℃~90℃ 查看详情>> Order code F11090004 Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090004 LT-PG2-240A-OFM 30.00 / 5600 1080 21.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 21.5 kg Manufacturer specification Configuration: LT-PG2-240A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 21.5 Repeatability 0.04 mm Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.04 Single-finger stroke 30 mm Manufacturer specification Configuration: LT-PG2-240A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 30
LT-PG2-240A-CFM	800 cm³Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	10 kgConfiguration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	6,200 NConfiguration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 800 cm³ Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 800.0 Closing force 4,380 N Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 4380 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 10 kg Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 10 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 6,200 N Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 6200 Maximum finger length 280 mm Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 280 Maximum finger mass 8.5 kg Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 8.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,080 N Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1080 Moment mx 260 N·m Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 260 Moment my 160 N·m Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 160 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.65/0.35 s Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.65/0.35 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090003 LT-PG2-240A-CFM 30.00 4380 / 1080 21.50 5℃~90℃ 查看详情>> Order code F11090003 Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090003 LT-PG2-240A-CFM 30.00 4380 / 1080 21.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 21.5 kg Manufacturer specification Configuration: LT-PG2-240A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 21.5 Repeatability 0.04 mm Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.04 Single-finger stroke 30 mm Manufacturer specification Configuration: LT-PG2-240A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 30
LT-PG2-240A	650 cm³Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified.	7.9 kgConfiguration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified.	6,200 NConfiguration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 650 cm³ Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 650.0 Closing force 4,300 N Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 4300 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 7.9 kg Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 7.9 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 6,200 N Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 6200 Maximum finger length 320 mm Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 320 Maximum finger mass 8.5 kg Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 8.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 260 N·m Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 260 Moment my 160 N·m Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 160 Moment mz 250 N·m Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 250 Opening / closing time 0.45/0.45 s Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.45/0.45 Opening force 4,520 N Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 4520 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090002 LT-PG2-240A 30.00 4300 4520 / 21.50 5℃~90℃ 查看详情>> Order code F11090002 Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11090002 LT-PG2-240A 30.00 4300 4520 / 21.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 21.5 kg Manufacturer specification Configuration: LT-PG2-240A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 21.5 Repeatability 0.02 mm Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.02 Single-finger stroke 30 mm Manufacturer specification Configuration: LT-PG2-240A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-240A 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 30
LT-PG2-200B-OFM	620 cm³Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	6.5 kgConfiguration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	5,000 NConfiguration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 620 cm³ Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 620.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 6.5 kg Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 6.5 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 5,000 N Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 5000 Maximum finger length 200 mm Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 200 Maximum finger mass 6.5 kg Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 6.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,550 N Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1550 Moment mx 180 N·m Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 180 Moment my 140 N·m Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 140 Moment mz 200 N·m Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 200 Opening / closing time 0.3/0.6 s Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.3/0.6 Opening force 6,900 N Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 6900 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080010 LT-PG2-200B-OFM 14.00 / 6900 1550 25.00 5℃~90℃ 查看详情>> Order code F11080010 Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080010 LT-PG2-200B-OFM 14.00 / 6900 1550 25.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 25 kg Manufacturer specification Configuration: LT-PG2-200B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 25 Repeatability 0.02 mm Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.02 Single-finger stroke 14 mm Manufacturer specification Configuration: LT-PG2-200B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 14
LT-PG2-200B-CFM	500 cm³Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	6.6 kgConfiguration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	5,000 NConfiguration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 500 cm³ Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 500.0 Closing force 6,640 N Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 6640 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 6.6 kg Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 6.6 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 5,000 N Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 5000 Maximum finger length 200 mm Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 200 Maximum finger mass 6.5 kg Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 6.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,550 N Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1550 Moment mx 180 N·m Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 180 Moment my 140 N·m Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 140 Moment mz 200 N·m Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 200 Opening / closing time 0.6/0.3 s Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.6/0.3 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080009 LT-PG2-200B-CFM 14.00 6640 / 1550 25.00 5℃~90℃ 查看详情>> Order code F11080009 Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080009 LT-PG2-200B-CFM 14.00 6640 / 1550 25.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 25 kg Manufacturer specification Configuration: LT-PG2-200B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 25 Repeatability 0.02 mm Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.02 Single-finger stroke 14 mm Manufacturer specification Configuration: LT-PG2-200B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 14
LT-PG2-200B	385 cm³Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified.	5.3 kgConfiguration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified.	5,000 NConfiguration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 385 cm³ Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 385.0 Closing force 5,090 N Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 5090 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 5.3 kg Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 5.3 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 5,000 N Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 5000 Maximum finger length 240 mm Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 240 Maximum finger mass 6.5 kg Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 6.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 180 N·m Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 180 Moment my 140 N·m Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 140 Moment mz 200 N·m Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 200 Opening / closing time 0.35/0.35 s Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.35/0.35 Opening force 5,350 N Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 5350 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080008 LT-PG2-200B 14.00 5090 5350 / 25.00 5℃~90℃ 查看详情>> Order code F11080008 Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080008 LT-PG2-200B 14.00 5090 5350 / 25.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 25 kg Manufacturer specification Configuration: LT-PG2-200B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 25 Repeatability 0.02 mm Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.02 Single-finger stroke 14 mm Manufacturer specification Configuration: LT-PG2-200B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200B 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 14
LT-PG2-200A-OFM	385 cm³Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	6.3 kgConfiguration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	5,000 NConfiguration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 385 cm³ Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 385.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 6.3 kg Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 6.3 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 5,000 N Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 5000 Maximum finger length 240 mm Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 240 Maximum finger mass 6.5 kg Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 6.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 900 N Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 900 Moment mx 180 N·m Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 180 Moment my 140 N·m Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 140 Moment mz 200 N·m Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 200 Opening / closing time 0.3/0.6 s Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.3/0.6 Opening force 4,010 N Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 4010 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080005 LT-PG2-200A-OFM 25.00 / 4010 900 14.50 5℃~90℃ 查看详情>> Order code F11080005 Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080005 LT-PG2-200A-OFM 25.00 / 4010 900 14.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 14.5 kg Manufacturer specification Configuration: LT-PG2-200A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 14.5 Repeatability 0.02 mm Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.02 Single-finger stroke 25 mm Manufacturer specification Configuration: LT-PG2-200A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 25
LT-PG2-200A-CFM	500 cm³Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	6.4 kgConfiguration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	5,000 NConfiguration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 500 cm³ Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 500.0 Closing force 3,860 N Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 3860 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 6.4 kg Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 6.4 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 5,000 N Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 5000 Maximum finger length 240 mm Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 240 Maximum finger mass 6.5 kg Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 6.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 900 N Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 900 Moment mx 180 N·m Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 180 Moment my 140 N·m Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 140 Moment mz 200 N·m Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 200 Opening / closing time 0.6/0.3 s Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.6/0.3 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080004 LT-PG2-200A-CFM 25.00 3860 / 900 14.50 5℃~90℃ 查看详情>> Order code F11080004 Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080004 LT-PG2-200A-CFM 25.00 3860 / 900 14.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 14.5 kg Manufacturer specification Configuration: LT-PG2-200A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 14.5 Repeatability 0.02 mm Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.02 Single-finger stroke 25 mm Manufacturer specification Configuration: LT-PG2-200A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 25
LT-PG2-200A	0 cm³Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.	5.1 kgConfiguration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.	5,000 NConfiguration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 0 cm³ Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 0.0 Closing force 2,960 N Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 2960 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 5.1 kg Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 5.1 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 5,000 N Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 5000 Maximum finger length 280 mm Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 280 Maximum finger mass 6.5 kg Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 6.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 180 N·m Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 180 Moment my 200 N·m Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 200 Moment mz 140 N·m Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 140 Opening / closing time 0.35/0.35 s Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.35/0.35 Opening force 3,110 N Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 3110 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080003 LT-PG2-200A 25.00 2960 3110 / 14.50 5℃~90℃ 查看详情>> Order code F11080003 Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11080003 LT-PG2-200A 25.00 2960 3110 / 14.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 14.5 kg Manufacturer specification Configuration: LT-PG2-200A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 14.5 Repeatability 0.02 mm Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.02 Single-finger stroke 25 mm Manufacturer specification Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 25
LT-PG2-160B-OFM	265 cm³Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	3.33 kgConfiguration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	4,300 NConfiguration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 265 cm³ Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 265.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 3.33 kg Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 3.33 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 4,300 N Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 4300 Maximum finger length 200 mm Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 200 Maximum finger mass 3.5 kg Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 3.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,070 N Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1070 Moment mx 170 N·m Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 170 Moment my 180 N·m Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 180 Moment mz 130 N·m Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 130 Opening / closing time 0.12/0.25 s Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.12/0.25 Opening force 4,800 N Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 4800 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070009 LT-PG2-160B-OFM 8.00 / 4800 1070 17.00 5℃~90℃ 查看详情>> Order code F11070009 Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070009 LT-PG2-160B-OFM 8.00 / 4800 1070 17.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 17 kg Manufacturer specification Configuration: LT-PG2-160B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 17 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 8 mm Manufacturer specification Configuration: LT-PG2-160B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 8
LT-PG2-160B-CFM	165 cm³Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	3.4 kgConfiguration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	4,300 NConfiguration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 165 cm³ Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 165.0 Closing force 4,500 N Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 4500 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 3.4 kg Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 3.4 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 4,300 N Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 4300 Maximum finger length 210 mm Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 210 Maximum finger mass 3.5 kg Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 3.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 1,070 N Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 1070 Moment mx 170 N·m Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 170 Moment my 180 N·m Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 180 Moment mz 130 N·m Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 130 Opening / closing time 0.25/0.12 s Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.25/0.12 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070008 LT-PG2-160B-CFM 8.00 4500 / 1070 17.00 5℃~90℃ 查看详情>> Order code F11070008 Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070008 LT-PG2-160B-CFM 8.00 4500 / 1070 17.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 17 kg Manufacturer specification Configuration: LT-PG2-160B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 17 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 8 mm Manufacturer specification Configuration: LT-PG2-160B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 8
LT-PG2-160B	165 cm³Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified.	2.8 kgConfiguration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified.	4,300 NConfiguration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 165 cm³ Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 165.0 Closing force 3,430 N Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 3430 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 2.8 kg Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 2.8 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 4,300 N Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 4300 Maximum finger length 210 mm Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 210 Maximum finger mass 3.5 kg Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 3.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 170 N·m Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 170 Moment my 180 N·m Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 180 Moment mz 130 N·m Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 130 Opening / closing time 0.15/0.15 s Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.15/0.15 Opening force 3,730 N Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 3730 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070005 LT-PG2-160B 8.00 3430 3730 / 17.00 5℃~90℃ 查看详情>> Order code F11070005 Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070005 LT-PG2-160B 8.00 3430 3730 / 17.00 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 17 kg Manufacturer specification Configuration: LT-PG2-160B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 17 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 8 mm Manufacturer specification Configuration: LT-PG2-160B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160B 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 8
LT-PG2-160A-OFM	265 cm³Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	3.24 kgConfiguration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	4,300 NConfiguration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 265 cm³ Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 265.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 3.24 kg Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 3.24 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 4,300 N Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 4300 Maximum finger length 210 mm Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 210 Maximum finger mass 3.5 kg Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 3.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 540 N Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 540 Moment mx 170 N·m Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 170 Moment my 180 N·m Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 180 Moment mz 130 N·m Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 130 Opening / closing time 0.12/0.25 s Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.12/0.25 Opening force 2,480 N Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 2480 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070003 LT-PG2-160A-OFM 16.00 / 2480 540 8.50 5℃~90℃ 查看详情>> Order code F11070003 Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070003 LT-PG2-160A-OFM 16.00 / 2480 540 8.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 8.5 kg Manufacturer specification Configuration: LT-PG2-160A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 8.5 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 16 mm Manufacturer specification Configuration: LT-PG2-160A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 16
LT-PG2-160A-CFM	210 cm³Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	3.3 kgConfiguration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	4,300 NConfiguration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 210 cm³ Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 210.0 Closing force 2,325 N Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 2325 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 3.3 kg Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 3.3 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 4,300 N Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 4300 Maximum finger length 210 mm Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 210 Maximum finger mass 3.5 kg Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 3.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 540 N Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 540 Moment mx 170 N·m Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 170 Moment my 180 N·m Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 180 Moment mz 130 N·m Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 130 Opening / closing time 0.25/0.12 s Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.25/0.12 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070002 LT-PG2-160A-CFM 16.00 2325 / 540 8.50 5℃~90℃ 查看详情>> Order code F11070002 Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070002 LT-PG2-160A-CFM 16.00 2325 / 540 8.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 8.5 kg Manufacturer specification Configuration: LT-PG2-160A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 8.5 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 16 mm Manufacturer specification Configuration: LT-PG2-160A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 16
LT-PG2-160A	165 cm³Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified.	2.7 kgConfiguration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified.	4,300 NConfiguration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 165 cm³ Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 165.0 Closing force 1,785 N Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 1785 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 2.7 kg Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 2.7 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 4,300 N Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 4300 Maximum finger length 220 mm Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 220 Maximum finger mass 3.5 kg Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 3.5 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 170 N·m Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 170 Moment my 180 N·m Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 180 Moment mz 130 N·m Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 130 Opening / closing time 0.15/0.15 s Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.15/0.15 Opening force 1,940 N Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 1940 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070001 LT-PG2-160A 16.00 1785 1940 / 8.50 5℃~90℃ 查看详情>> Order code F11070001 Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11070001 LT-PG2-160A 16.00 1785 1940 / 8.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 8.5 kg Manufacturer specification Configuration: LT-PG2-160A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 8.5 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 16 mm Manufacturer specification Configuration: LT-PG2-160A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-160A 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 16
LT-PG2-125B-OFM	165 cm³Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1.84 kgConfiguration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	2,800 NConfiguration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 165 cm³ Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 165.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 1.84 kg Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 1.84 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 2,800 N Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2800 Maximum finger length 160 mm Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 160 Maximum finger mass 2.1 kg Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 2.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 830 N Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 830 Moment mx 120 N·m Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 120 Moment my 145 N·m Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 145 Moment mz 100 N·m Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 100 Opening / closing time 0.08/0.12 s Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.08/0.12 Opening force 3,370 N Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 3370 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060009 LT-PG2-125B-OFM 6.50 / 3370 830 11.70 5℃~90℃ 查看详情>> Order code F11060009 Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060009 LT-PG2-125B-OFM 6.50 / 3370 830 11.70 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 11.7 kg Manufacturer specification Configuration: LT-PG2-125B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 11.7 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 6.5 mm Manufacturer specification Configuration: LT-PG2-125B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 6.5
LT-PG2-125B-CFM	120 cm³Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1.8 kgConfiguration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	2,800 NConfiguration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 120 cm³ Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 120.0 Closing force 3,170 N Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 3170 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 1.8 kg Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 1.8 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 2,800 N Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2800 Maximum finger length 160 mm Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 160 Maximum finger mass 2.1 kg Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 2.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 830 N Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 830 Moment mx 120 N·m Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 120 Moment my 145 N·m Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 145 Moment mz 100 N·m Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 100 Opening / closing time 0.12/0.08 s Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.12/0.08 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060008 LT-PG2-125B-CFM 6.50 3170 / 830 11.70 5℃~90℃ 查看详情>> Order code F11060008 Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060008 LT-PG2-125B-CFM 6.50 3170 / 830 11.70 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 11.7 kg Manufacturer specification Configuration: LT-PG2-125B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 11.7 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 6.5 mm Manufacturer specification Configuration: LT-PG2-125B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 6.5
LT-PG2-125B	87 cm³Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified.	1.42 kgConfiguration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified.	2,800 NConfiguration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 87 cm³ Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 87.0 Closing force 2,340 N Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 2340 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 1.42 kg Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 1.42 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 2,800 N Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2800 Maximum finger length 170 mm Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 170 Maximum finger mass 2.1 kg Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 2.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 120 N·m Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 120 Moment my 145 N·m Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 145 Moment mz 100 N·m Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 100 Opening / closing time 0.1/0.1 s Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.1/0.1 Opening force 2,540 N Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 2540 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060003 LT-PG2-125B 6.50 2340 2540 / 11.70 5℃~90℃ 查看详情>> Order code F11060003 Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060003 LT-PG2-125B 6.50 2340 2540 / 11.70 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 11.7 kg Manufacturer specification Configuration: LT-PG2-125B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 11.7 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 6.5 mm Manufacturer specification Configuration: LT-PG2-125B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125B 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 6.5
LT-PG2-125A-OFM	165 cm³Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1.8 kgConfiguration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	2,800 NConfiguration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 165 cm³ Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 165.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 1.8 kg Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 1.8 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 2,800 N Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2800 Maximum finger length 170 mm Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 170 Maximum finger mass 2.1 kg Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 2.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 400 N Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 400 Moment mx 120 N·m Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 120 Moment my 145 N·m Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 145 Moment mz 100 N·m Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 100 Opening / closing time 0.08/0.12 s Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.08/0.12 Opening force 1,660 N Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 1660 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060004 LT-PG2-125A-OFM 13.00 / 1660 400 5.80 5℃~90℃ 查看详情>> Order code F11060004 Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060004 LT-PG2-125A-OFM 13.00 / 1660 400 5.80 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 5.8 kg Manufacturer specification Configuration: LT-PG2-125A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 5.8 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 13 mm Manufacturer specification Configuration: LT-PG2-125A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 13
LT-PG2-125A-CFM	87 cm³Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1.76 kgConfiguration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	2,800 NConfiguration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 87 cm³ Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 87.0 Closing force 1,560 N Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 1560 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 1.76 kg Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 1.76 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 2,800 N Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2800 Maximum finger length 180 mm Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 180 Maximum finger mass 2.1 kg Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 2.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 400 N Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 400 Moment mx 120 N·m Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 120 Moment my 145 N·m Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 145 Moment mz 100 N·m Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 100 Opening / closing time 0.12/0.08 s Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.12/0.08 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060002 LT-PG2-125A-CFM 13.00 1560 / 400 5.80 5℃~90℃ 查看详情>> Order code F11060002 Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060002 LT-PG2-125A-CFM 13.00 1560 / 400 5.80 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 5.8 kg Manufacturer specification Configuration: LT-PG2-125A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 5.8 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 13 mm Manufacturer specification Configuration: LT-PG2-125A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 13
LT-PG2-125A	87 cm³Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified.	1.38 kgConfiguration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified.	2,800 NConfiguration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 87 cm³ Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 87.0 Closing force 1,160 N Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 1160 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 1.38 kg Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 1.38 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 2,800 N Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2800 Maximum finger length 180 mm Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 180 Maximum finger mass 2.1 kg Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 2.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 120 N·m Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 120 Moment my 145 N·m Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 145 Moment mz 100 N·m Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 100 Opening / closing time 0.1/0.1 s Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.1/0.1 Opening force 1,260 N Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 1260 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060001 LT-PG2-125A 13.00 1160 1260 / 5.80 5℃~90℃ 查看详情>> Order code F11060001 Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11060001 LT-PG2-125A 13.00 1160 1260 / 5.80 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 5.8 kg Manufacturer specification Configuration: LT-PG2-125A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 5.8 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 13 mm Manufacturer specification Configuration: LT-PG2-125A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-125A 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 13
LT-PG2-100B-OFM	90 cm³Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.93 kgConfiguration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	2,000 NConfiguration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 90 cm³ Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 90.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.93 kg Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.93 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 2,000 N Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2000 Maximum finger length 125 mm Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 125 Maximum finger mass 1.1 kg Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 1.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 510 N Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 510 Moment mx 90 N·m Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 90 Moment my 115 N·m Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 115 Moment mz 70 N·m Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 70 Opening / closing time 0.05/0.09 s Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.05/0.09 Opening force 2,080 N Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 2080 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050010 LT-PG2-100B-OFM 5.00 / 2080 510 7.10 5℃~90℃ 查看详情>> Order code F11050010 Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050010 LT-PG2-100B-OFM 5.00 / 2080 510 7.10 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 7.1 kg Manufacturer specification Configuration: LT-PG2-100B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 7.1 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 5 mm Manufacturer specification Configuration: LT-PG2-100B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 5
LT-PG2-100B-CFM	80 cm³Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.98 kgConfiguration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	2,000 NConfiguration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 80 cm³ Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 80.0 Closing force 1,930 N Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 1930 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.98 kg Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.98 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 2,000 N Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2000 Maximum finger length 125 mm Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 125 Maximum finger mass 1.1 kg Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 1.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 510 N Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 510 Moment mx 80 N·m Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 80 Moment my 115 N·m Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 115 Moment mz 70 N·m Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 70 Opening / closing time 0.09/0.05 s Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.09/0.05 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050009 LT-PG2-100B-CFM 5.00 1930 / 510 7.10 5℃~90℃ 查看详情>> Order code F11050009 Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050009 LT-PG2-100B-CFM 5.00 1930 / 510 7.10 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 7.1 kg Manufacturer specification Configuration: LT-PG2-100B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 7.1 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 5 mm Manufacturer specification Configuration: LT-PG2-100B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 5
LT-PG2-100B	45 cm³Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.83 kgConfiguration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified.	2,000 NConfiguration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 45 cm³ Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 45.0 Closing force 1,420 N Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 1420 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.83 kg Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.83 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 2,000 N Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2000 Maximum finger length 135 mm Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 135 Maximum finger mass 1.1 kg Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 1.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 80 N·m Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 80 Moment my 115 N·m Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 115 Moment mz 70 N·m Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 70 Opening / closing time 0.07/0.07 s Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.07/0.07 Opening force 1,570 N Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 1570 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050005 LT-PG2-100B 5.00 1420 1570 / 7.10 5℃~90℃ 查看详情>> Order code F11050005 Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050005 LT-PG2-100B 5.00 1420 1570 / 7.10 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 7.1 kg Manufacturer specification Configuration: LT-PG2-100B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 7.1 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 5 mm Manufacturer specification Configuration: LT-PG2-100B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100B 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 5
LT-PG2-100A-OFM	90 cm³Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.93 kgConfiguration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	2,000 NConfiguration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 90 cm³ Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 90.0 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.93 kg Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.93 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 2,000 N Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2000 Maximum finger length 135 mm Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 135 Maximum finger mass 1.1 kg Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 1.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 240 N Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 240 Moment mx 80 N·m Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 80 Moment my 115 N·m Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 115 Moment mz 70 N·m Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 70 Opening / closing time 0.05/0.09 s Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.05/0.09 Opening force 1,010 N Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 1010 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050003 LT-PG2-100A-OFM 10.00 / 1010 240 3.50 5℃~90℃ 查看详情>> Order code F11050003 Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050003 LT-PG2-100A-OFM 10.00 / 1010 240 3.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 3.5 kg Manufacturer specification Configuration: LT-PG2-100A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 3.5 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 10 mm Manufacturer specification Configuration: LT-PG2-100A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-OFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 10
LT-PG2-100A-CFM	80 cm³Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.98 kgConfiguration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	2,000 NConfiguration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 80 cm³ Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 80.0 Closing force 950 N Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 950 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.98 kg Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.98 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 2,000 N Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2000 Maximum finger length 135 mm Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 135 Maximum finger mass 1.1 kg Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 1.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 240 N Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司最小保持力(N) 240 Moment mx 80 N·m Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 80 Moment my 115 N·m Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 115 Moment mz 70 N·m Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 70 Opening / closing time 0.09/0.05 s Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.09/0.05 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050002 LT-PG2-100A-CFM 10.00 950 / 240 3.50 5℃~90℃ 查看详情>> Order code F11050002 Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050002 LT-PG2-100A-CFM 10.00 950 / 240 3.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 3.5 kg Manufacturer specification Configuration: LT-PG2-100A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 3.5 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 10 mm Manufacturer specification Configuration: LT-PG2-100A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A-CFM 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 10
LT-PG2-100A	45 cm³Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.83 kgConfiguration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified.	2,000 NConfiguration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 45 cm³ Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司耗气量(cm3)(双程) 45.0 Closing force 710 N Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司闭合力(N) 710 Ingress protection IP40 Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.83 kg Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司自重(kg) 0.83 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 2,000 N Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司最大轴向力Fz(N) 2000 Maximum finger length 145 mm Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大长度(mm) 145 Maximum finger mass 1.1 kg Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司手指最大重量(kg) 1.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 80 N·m Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mx(N·m) 80 Moment my 115 N·m Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩My(N·m) 115 Moment mz 70 N·m Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司力矩Mz(N·m) 70 Opening / closing time 0.07/0.07 s Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司开/合时间(s) 0.07/0.07 Opening force 780 N Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司张开力(N) 780 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050001 LT-PG2-100A 10.00 710 780 / 3.50 5℃~90℃ 查看详情>> Order code F11050001 Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11050001 LT-PG2-100A 10.00 710 780 / 3.50 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 3.5 kg Manufacturer specification Configuration: LT-PG2-100A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司建议工件重量（kg)① 3.5 Repeatability 0.01 mm Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 10 mm Manufacturer specification Configuration: LT-PG2-100A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-PG2-100A 两指平行机械夹爪 - 郑州领航机器人有限公司单指行程(mm) 10

Related products

Looking up through a circular courtyard at modern glass towers and a blue sky.

Build connections across China’s robotics ecosystem.

Share your team background and technical or sourcing goals. We’ll check availability with relevant company representatives and coordinate the next steps.

How it works

How to initiate connections

Define your requirements

Select your target companies and dates, and share your team background and technical or sourcing goals.
We facilitate connections

We identify relevant company representatives, discuss your requirements and check availability.
Confirm your schedule

Review the proposed agenda, arrangements and fees, then confirm your schedule by email.

Connection details

What would you like to achieve through these connections? Tell us what your team is working on and what you hope to achieve. A product, location or target date can help us narrow down the options.

Contact details

Your name Work email

Company / organization Country / region

Company website (optional)

Your request goes to the Robotuo team. Privacy Policy

Robotics is better
in person.

Step inside a working showcase of robotics, from humanoids and helpful machines to the parts that bring them to life.

Book the visit experience Connect with the Robotics' Ecosystem

Visitors gather around a wheeled quadruped robot during a live demonstration at Robot Valley. — A front-row seat to robotics.Inside Robot Valley, Shenzhen

50+exhibiting companies

Hands-onrobot operation & live demos

~1 hourto explore, try, and ask

Sky decka new view of Shenzhen

Inside the showroom

One visit.
A whole world of robotics.

Explore complete machines, real-world applications, and the components behind them. Get a closer look at the variety on display.

A visitor posing beside a compact silver humanoid robot.

Interaction

Meet a humanoid

A first handshake. A playful boxing pose. See how robots move alongside us.

Yellow DEXFORCE robot behind its showroom service counter.

Service robots

Robots at your service

Discover a service robot in a shop-counter setting, with objects it can handle.

ASTRALL quadruped robots on display in Robot Valley.

Robot dogs

Four legs. New possibilities.

Take a closer look at robot dogs and the mechanics that keep them moving.

Close-up of a dexterous robotic hand on a display stand.

Dexterous hands

The detail is in the hands

Explore the dexterous hands that turn movement into precise manipulation.

A visitor standing next to a full-size LimX humanoid robot.

Humanoids

A full-body perspective

Get close to the joints, sensors, and structure of a full-size humanoid.

Blue exhibition booths displaying wearable exoskeletons and compact robots.

Wearable robotics

Technology you can wear

Discover wearable assistance alongside robots built for very different environments.

Automated cooking robot with a stainless-steel wok, ingredient dispensers, and touchscreen controls.

Real-world applications

From the lab to daily life

Explore practical applications, including automated cooking and everyday services.

Robotics components arranged on a showroom demonstration counter.

Core components

What makes a robot work?

Look beyond the body to the components and engineering that make it possible.

A glimpse of what’s inside. Exhibits and live demonstrations may vary by visit.

The blue Robot Valley entrance sculpture inside the real showroom.

More than a display

Watch it move.
Then have a go.

The best questions come when you’re standing right beside a robot. A guided visit brings the hardware, the demonstrations, and the conversation together.

01
Get your bearings
Follow the showroom route and discover how different robots are used.
02
Try robot operation
Get hands-on with selected robots through guided interaction.
03
Keep the conversation going
Ask about the technology, share your interests, and explore what comes next.

Book the visit experience

Beyond the showroom

Step outside.
See the bigger picture.

The sky deck opens onto Shenzhen’s skyline and surrounding mountains. Take in the place where robotics companies, researchers, and makers are building what comes next.

A guide points out the city to visitors on the glass-railed Robot Valley sky deck. — A different perspective on Robot Valley.

An international university group gathers on the timber sky deck with the Shenzhen skyline behind them. — New connections, with a view.

Curiosity brings us together

Come with questions.
Leave with possibilities.

For the simply curious, the people building, and the teams exploring their next idea. Robot Valley is a place to see the technology and talk about where it could go.

Curious visitorsStudents & researchersBuilders & foundersCompany teams

An audience of international visitors listens to a presentation inside Robot Valley. — Ideas are better when they’re shared.

Plan your visit

A little planning.
A lot to discover.

Where: Nanshan, Shenzhen, China
Allow: Approximately one hour
Booking: By appointment

Choose your preferred date and group size on the booking page. The team will confirm the arrangements with you.

What’s included in the visit?

A guided showroom experience with hands-on robot operation and interactive demonstrations. You’ll have time to ask questions and explore the exhibits. Specific robots and activities depend on the day’s arrangements.

Do I need to book in advance?

Yes. Visits are by appointment. Use the booking page to choose your preferred date and share your group details. The team will confirm availability, fees, and arrangements before your visit.

Can I bring a team or student group?

Tell us your group size and interests when booking. Company teams, students, researchers, and other groups can discuss their priorities with the team before the visit.

Can we focus on a particular technology?

Share the robots, applications, or components you’re interested in with your booking request. The team can discuss what’s available and suitable for your visit.

Something else on your mind? info@robotuo.com

Your next encounter with robotics

Come curious.
Leave inspired.

Book the visit experience

Real robots. Real conversations.
See you in Shenzhen.

Visitors posing together at the Robot Valley showroom

About Robotuo

Connecting the world to China’s robotics ecosystem.

Get closer to the people, technology, and opportunities shaping robotics in China.

Connect Visit Robot Valley

Local knowledge / Firsthand insight / Global reach

About us

Build in China.
Reach the world.

We connect global teams with China’s robotics supply chain and the SZ RoboX open-source community to find partners, share expertise, and bring robotics to new markets.

For companies, developers, and entrepreneurs building what comes next in robotics.

Companies in our network: 500+
International visits hosted: 200+
Countries & regions: 30+

A robot drive component on display at Robot Valley

Robotics supply chain

Access robotics, AI hardware, and component suppliers in China. Find partners that fit your business.

A visitor shaking hands with a Robotuo robot during a guided visit

Firsthand partnerships

Understand Chinese businesses, explore technical capabilities, and find opportunities for collaboration.

Developers and entrepreneurs at a MakerMods and SZ RoboX community event

Global Connections, Backed by Experience

With over 1,000 business visitors and buyers served across more than 20 countries and regions, we draw on international experience to connect teams with robotics industry resources.

OUR MISSION

Turn shared knowledge into real-world robotics.

We combine supply chain integration and open-source deployment standards to support robotics applications worldwide.

Connect

For Companies

Bring Open-Source Innovation into Practice

We combine supply chain integration with the development of open-source deployment standards, connecting technology and hardware resources to support robotics applications worldwide.

Robotics sensors and drive components displayed at Robot Valley

For Developers & Entrepreneurs

Find Your Community. Discover New Opportunities.

Join the SZ RoboX open-source robotics community to exchange technical knowledge with developers and entrepreneurs, follow global industry developments, and explore opportunities to innovate and collaborate.

International visitors exchanging ideas around a Robotuo robot demonstration

YOUR PRIVACY

Privacy Policy.

How this website uses information, and the choices you can make.

About this policy

Last updated: 23 September 2026.

Robotuo is responsible for the personal information processed through this website.

This policy covers browsing Robotuo, local preferences, and our planned use of Google Analytics through Firebase and OneSignal web push notifications. These optional services only run when enabled on the site and you have agreed to the relevant category.

Browsing and essential information

You can browse without an account or agreeing to optional services. Our hosting provider receives your IP address, requested URL, browser information, and request time to deliver and protect the site. Our basis for this processing is our legitimate interest in operating a secure, reliable website.

We store your privacy choices in this browser so we can respect them. This essential preference includes the policy version, your choices, and when you made them; it is not sent to an analytics service. Hosting and security logs are separate from these browser settings.

Saved comparisons and follows

With your consent, “Remember my selections” stores comparisons and followed companies and products in this browser. These are not synced to an account or shared with Google or OneSignal by our integration. Without consent, these features still work for the current page session.

Turning this option off deletes saved selections from local storage. Current selections remain in memory until you reload or close the page.

Google Analytics through Firebase

With analytics consent, we use the Google Analytics web stream linked to our Firebase project to understand which parts of Robotuo are used and improve the website. Google processes online identifiers, cookie identifiers, browser and device information, general page categories, and usage events. IP addresses are used by Google during collection, including to derive approximate location.

Our integration uses general page categories rather than search terms, full query strings, or individual company and product identifiers. With analytics consent, we also measure visits attributed to recognized AI services and confirmed Connect requests from those visits. We send a fixed provider label and page category, without sending the original referral URL or form contents. Attribution lasts only within the current page session and may be incomplete. We do not send application form contents, names, or email addresses to Analytics. Advertising consent remains off; Google signals and advertising personalization are disabled in our integration.

The Google tag is not loaded before analytics consent. Declining analytics does not enable cookieless analytics pings. Learn more in Google’s Privacy Policy and Firebase’s privacy information.

OneSignal notifications

With notification consent, OneSignal helps us deliver Robotuo news and updates. It processes subscription and device identifiers, push tokens, browser and operating system information, IP address, language, and notification delivery and interaction information. This service may use browser storage and a service worker to deliver notifications even when the website is closed.

Saving consent does not grant browser permission. Open Privacy settings, save your notification choice, then select “Enable notifications” and allow notifications in your browser if prompted. You can withdraw consent here or block notifications in your browser’s site settings.

Withdrawal disables further SDK data collection and attempts to unsubscribe this browser from push messages. It does not automatically erase information already held by OneSignal. See OneSignal’s Privacy Policy.

Cookies, storage, and retention

Our essential robotuo-privacy record is kept in local storage and is valid for 180 days. We ask again when it expires or the consent version changes. Saved selections use robotuo-compare, robotuo-catalog-follows, robotuo-product-follows, and robotuo-follow-labels; they stay until you withdraw that choice, your consent expires, or you clear site data.

When analytics is enabled with consent, Google uses cookies such as _ga and _ga_*. Our integration limits these cookies to 180 days without automatic renewal. Withdrawing analytics consent disables collection and removes accessible Analytics cookies for this site. Cookie expiry is separate from the retention of data already received by Google.

OneSignal stores subscription information in browser storage and its service worker. Vendor-held records and hosting logs follow the retention settings and obligations applicable to those services; withdrawing consent does not itself delete previously collected records. You can request erasure where applicable.

Your choices and rights

Use “Reject all,” “Accept all,” or individual choices in Privacy settings. Optional categories are off by default. Closing settings or continuing to browse does not give consent. The Privacy settings button is available in the footer throughout the site. Withdrawing consent is as easy as giving it and does not affect the lawfulness of processing before withdrawal.

Where the GDPR or UK GDPR applies, you may request access, correction, erasure, restriction, or portability of your personal information and object to processing based on legitimate interests. You may complain to your local data protection authority. We normally respond to rights requests within one month, subject to applicable extensions and identity verification.

Privacy contact details will be published before optional services are activated.

Clearing browser data resets these choices. To stop push notifications, also disable notification permission in your browser; clearing site data alone may not withdraw permission. Choices apply to this browser, not every device you use.

Service providers and international processing

Our hosting provider, Google, OneSignal, and the browser’s push delivery provider may process technical information needed for their respective services. Processing may take place outside your country, including in the United States. Where required, transfers need appropriate safeguards, such as applicable adequacy decisions or standard contractual clauses. You may request information about safeguards that apply to your data.

Saved selections, analytics, and notification processing rely on your consent. We do not sell the information collected through these features or use it for advertising in this integration.

Search, applications, and external websites

Search terms filter content in your browser and may appear in the page URL. Avoid entering sensitive information into search. Application and issue-report drafts stay in this page until you choose Send. Sending shares the information you entered and the relevant page with Robotuo through our hosting provider and Feishu, where our team reviews it and follows up. Do not include sensitive personal information. These submissions work independently of optional analytics and notification preferences.

To limit repeated requests, our server processes your IP address and stores a keyed hash with short-lived counters. When deployed with our shared Upstash Redis store, it stores these hashes, submission identifiers and delivery state for up to 24 hours; form contents are not stored there. Application and report records remain in Feishu for team review and follow-up. Contact Robotuo about access or deletion using the contact information in this policy.

Reloading or closing the page clears unsent drafts. Visit previews do not send a booking. Company websites and the Robot Valley booking page are separate websites with their own privacy practices. Review their policies before submitting personal details.

About this product family

Compare variants

Specifications & evidence

Air consumption per double stroke

Ingress protection

Mass

Maximum air pressure

Maximum axial force fz

Maximum finger length

Maximum finger mass

Minimum air pressure

Minimum holding force

Moment mx

Moment my

Moment mz

Opening / closing time

Opening force

Operating temperature

Order code

Rated air pressure

Recommended workpiece mass

Repeatability

Single-finger stroke

Specifications & evidence

Air consumption per double stroke

Closing force

Ingress protection

Mass

Maximum air pressure

Maximum axial force fz

Maximum finger length

Maximum finger mass

Minimum air pressure

Minimum holding force

Moment mx

Moment my

Moment mz

Opening / closing time

Operating temperature

Order code

Rated air pressure

Recommended workpiece mass

Repeatability

Single-finger stroke

Specifications & evidence

Air consumption per double stroke

Closing force

Ingress protection

Mass

Maximum air pressure

Maximum axial force fz

Maximum finger length

Maximum finger mass

Minimum air pressure

Moment mx

Moment my

Moment mz

Opening / closing time

Opening force

Operating temperature

Order code

Rated air pressure

Recommended workpiece mass

Repeatability

Single-finger stroke

Specifications & evidence

Air consumption per double stroke

Ingress protection

Mass

Maximum air pressure

Maximum axial force fz

Maximum finger length

Maximum finger mass

Minimum air pressure

Minimum holding force

Moment mx

Moment my

Moment mz

Opening / closing time

Opening force