Bore diameter (d)
55 mm
Manufacturer specification
Configuration: BRU85
BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司
55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1
Product family
BRU(CRBF) crossed-roller bearings
16 variants · Varies by model, dimensions
About this product family
Manufacturer-defined BRU(CRBF) crossed-roller bearings family, with size and configuration details recorded on each individual model.
Cover image: Manufacturer series image; size may vary.
Compare variants
Values retain their source conditions and claim stage. A missing value means it has not been published in this catalogue.
| Variant / model | Bore diameter (d) | Inner-ring mounting-hole pattern | Inner-ring mounting pitch-circle diameter (pcd1) | Mass | Minimum chamfer (r) | Details & evidence |
|---|---|---|---|---|---|---|
| BRU85 | 55 mmConfiguration: BRU85 | 8-M5 throughConfiguration: BRU85; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 65 mmConfiguration: BRU85 | 1 kgConfiguration: BRU85 | 0.6 mmConfiguration: BRU85 | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Inner-ring mounting-hole pattern8-M5 through Manufacturer specification Configuration: BRU85; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 65 8-M5 贯通 8-M5 through 105 8-φ6 贯通 ,φ9.5 沉孔深度 5.4 8-φ5.5 through, φ9.5 counterbore depth 5.4 Inner-ring mounting pitch-circle diameter (pcd1)65 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 65 8-M5 贯通 8-M5 through 105 8-φ6 贯通 ,φ9.5 沉孔深度 5.4 8-φ5.5 through, φ9.5 counterbore depth 5.4 Mass1 kg Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Minimum chamfer (r)0.6 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Outer-ring mounting pitch-circle diameter (pcd2)105 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 65 8-M5 贯通 8-M5 through 105 8-φ6 贯通 ,φ9.5 沉孔深度 5.4 8-φ5.5 through, φ9.5 counterbore depth 5.4 Outside diameter (d)120 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Radial load rating (c)20.3 kN Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Radial load rating (co)29.5 kN Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Roller pitch circle diameter (dp)85 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Shaft diameter55 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Shoulder mounting dimension (dh)93 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Shoulder mounting dimension (ds)79 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 Width (b/b1)15 mm Manufacturer specification Configuration: BRU85 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 55 BRU85 55 120 85 15 0.6 79 93 20.3 29.5 1 |
| BRU148(G) | 90 mmConfiguration: BRU148(G) | Not published | Not published | 4.9 kgConfiguration: BRU148(G) | 1.5 mmConfiguration: BRU148(G) | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)90 mm Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Mass4.9 kg Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Minimum chamfer (r)1.5 mm Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Outside diameter (d)210 mm Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Radial load rating (c)49.1 kN Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Radial load rating (co)76.8 kN Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Roller pitch circle diameter (dp)147.5 mm Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Shaft diameter90 mm Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Shoulder mounting dimension (dh)162 mm Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Shoulder mounting dimension (ds)133 mm Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 Width (b/b1)25 mm Manufacturer specification Configuration: BRU148(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 |
| BRU178X | 115 mmConfiguration: BRU178X | 12-M8 throughConfiguration: BRU178X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 139 mmConfiguration: BRU178X | 6.8 kgConfiguration: BRU178X | 1.5 mmConfiguration: BRU178X | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)115 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Inner-ring mounting-hole pattern12-M8 through Manufacturer specification Configuration: BRU178X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 BRU178X 12-M8 贯通 12-M8 through Inner-ring mounting pitch-circle diameter (pcd1)139 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 139 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 217 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 BRU178X 12-M8 贯通 12-M8 through Mass6.8 kg Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Minimum chamfer (r)1.5 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Outer-ring mounting-hole pattern12-φ9 through, φ14 counterbore depth 8.6 Manufacturer specification Configuration: BRU178X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 139 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 217 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 BRU178X 12-M8 贯通 12-M8 through Outer-ring mounting pitch-circle diameter (pcd2)217 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 139 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 217 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 BRU178X 12-M8 贯通 12-M8 through Outside diameter (d)240 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Radial load rating (c)80.3 kN Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Radial load rating (co)135 kN Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Roller pitch circle diameter (dp)178 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Shaft diameter115 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Shoulder mounting dimension (dh)195 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Shoulder mounting dimension (ds)161 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X Width (b/b1)28 mm Manufacturer specification Configuration: BRU178X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 BRU178X |
| BRU148X | 90 mmConfiguration: BRU148X | 12-M8 throughConfiguration: BRU148X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 112 mmConfiguration: BRU148X | 4.9 kgConfiguration: BRU148X | 1.5 mmConfiguration: BRU148X | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)90 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Inner-ring mounting-hole pattern12-M8 through Manufacturer specification Configuration: BRU148X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 BRU148X 12-M8 贯通 12-M8 through Inner-ring mounting pitch-circle diameter (pcd1)112 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 RU148(G) 112 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through,φ14 counterbore depth 8.6 187 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 BRU148X 12-M8 贯通 12-M8 through Mass4.9 kg Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Minimum chamfer (r)1.5 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Outer-ring mounting-hole pattern12-φ9 through, φ14 counterbore depth 8.6 Manufacturer specification Configuration: BRU148X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 RU148(G) 112 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through,φ14 counterbore depth 8.6 187 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 BRU148X 12-M8 贯通 12-M8 through Outer-ring mounting pitch-circle diameter (pcd2)187 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 RU148(G) 112 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through,φ14 counterbore depth 8.6 187 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 BRU148X 12-M8 贯通 12-M8 through Outside diameter (d)210 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Radial load rating (c)49.1 kN Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Radial load rating (co)76.8 kN Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Roller pitch circle diameter (dp)147.5 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Shaft diameter90 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Shoulder mounting dimension (dh)162 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Shoulder mounting dimension (ds)133 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X Width (b/b1)25 mm Manufacturer specification Configuration: BRU148X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 90 BRU148(G) 90 210 147.5 25 1.5 133 162 49.1 76.8 4.9 BRU148X |
| BRU66 | 35 mmConfiguration: BRU66 | 8-M4 throughConfiguration: BRU66; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 45 mmConfiguration: BRU66 | 0.62 kgConfiguration: BRU66 | 0.6 mmConfiguration: BRU66 | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)35 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Inner-ring mounting-hole pattern8-M4 through Manufacturer specification Configuration: BRU66; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 45 8-M4 贯通 8-M4 through 83 8-φ4.5 贯通 ,φ8 沉孔深度 5.5 8-φ5.5 through, φ9.5counterbore depth 5.4 Inner-ring mounting pitch-circle diameter (pcd1)45 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 45 8-M4 贯通 8-M4 through 83 8-φ4.5 贯通 ,φ8 沉孔深度 5.5 8-φ5.5 through, φ9.5counterbore depth 5.4 Mass0.62 kg Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Minimum chamfer (r)0.6 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Outer-ring mounting pitch-circle diameter (pcd2)83 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 45 8-M4 贯通 8-M4 through 83 8-φ4.5 贯通 ,φ8 沉孔深度 5.5 8-φ5.5 through, φ9.5counterbore depth 5.4 Outside diameter (d)95 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Radial load rating (c)17.5 kN Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Radial load rating (co)22.3 kN Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Roller pitch circle diameter (dp)66 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Shaft diameter35 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Shoulder mounting dimension (dh)74 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Shoulder mounting dimension (ds)59 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 Width (b/b1)15 mm Manufacturer specification Configuration: BRU66 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 35 BRU66 35 95 66 15 0.6 59 74 17.5 22.3 0.62 |
| BRU445(G) | 350 mmConfiguration: BRU445(G) | 24-φ14 through, φ20 counterbore depth 13Configuration: BRU445(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 385 mmConfiguration: BRU445(G) | 35.4 kgConfiguration: BRU445(G) | 2.5 mmConfiguration: BRU445(G) | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)350 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Inner-ring mounting-hole pattern24-φ14 through, φ20 counterbore depth 13 Manufacturer specification Configuration: BRU445(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 385 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 505 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 Inner-ring mounting pitch-circle diameter (pcd1)385 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 385 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 505 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 Mass35.4 kg Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Minimum chamfer (r)2.5 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Outer-ring mounting-hole pattern24-φ14 through, φ20 counterbore depth 13 Manufacturer specification Configuration: BRU445(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 385 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 505 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 Outer-ring mounting pitch-circle diameter (pcd2)505 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 385 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 505 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 Outside diameter (d)540 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Radial load rating (c)222 kN Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Radial load rating (co)473 kN Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Roller pitch circle diameter (dp)445.4 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Shaft diameter350 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Shoulder mounting dimension (dh)473 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Shoulder mounting dimension (ds)417 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 Width (b/b1)45 mm Manufacturer specification Configuration: BRU445(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 |
| BRU124X | 80 mmConfiguration: BRU124X | 10-M5 throughConfiguration: BRU124X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 97 mmConfiguration: BRU124X | 2.6 kgConfiguration: BRU124X | 1 mmConfiguration: BRU124X | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)80 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Inner-ring mounting-hole pattern10-M5 through Manufacturer specification Configuration: BRU124X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 BRU124X 10-M5 贯通 10-M5 through Inner-ring mounting pitch-circle diameter (pcd1)97 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 97 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7 through, φ9.5 counterbore depth 5.4 148 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7through, φ9.5 counterbore depth 5.4 BRU124X 10-M5 贯通 10-M5 through Mass2.6 kg Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Minimum chamfer (r)1 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Outer-ring mounting-hole pattern10-φ5.7through, φ9.5 counterbore depth 5.4 Manufacturer specification Configuration: BRU124X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 97 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7 through, φ9.5 counterbore depth 5.4 148 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7through, φ9.5 counterbore depth 5.4 BRU124X 10-M5 贯通 10-M5 through Outer-ring mounting pitch-circle diameter (pcd2)148 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 97 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7 through, φ9.5 counterbore depth 5.4 148 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7through, φ9.5 counterbore depth 5.4 BRU124X 10-M5 贯通 10-M5 through Outside diameter (d)165 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Radial load rating (c)33.1 kN Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Radial load rating (co)50.9 kN Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Roller pitch circle diameter (dp)124 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Shaft diameter80 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Shoulder mounting dimension (dh)134 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Shoulder mounting dimension (ds)114 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X Width (b/b1)22 mm Manufacturer specification Configuration: BRU124X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 BRU124X |
| BRU124(G) | 80 mmConfiguration: BRU124(G) | 10-φ5.7 through, φ9.5 counterbore depth 5.4Configuration: BRU124(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 97 mmConfiguration: BRU124(G) | 2.6 kgConfiguration: BRU124(G) | 1 mmConfiguration: BRU124(G) | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)80 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Inner-ring mounting-hole pattern10-φ5.7 through, φ9.5 counterbore depth 5.4 Manufacturer specification Configuration: BRU124(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 97 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7 through, φ9.5 counterbore depth 5.4 148 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7through, φ9.5 counterbore depth 5.4 Inner-ring mounting pitch-circle diameter (pcd1)97 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 97 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7 through, φ9.5 counterbore depth 5.4 148 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7through, φ9.5 counterbore depth 5.4 Mass2.6 kg Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Minimum chamfer (r)1 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Outer-ring mounting-hole pattern10-φ5.7through, φ9.5 counterbore depth 5.4 Manufacturer specification Configuration: BRU124(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 97 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7 through, φ9.5 counterbore depth 5.4 148 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7through, φ9.5 counterbore depth 5.4 Outer-ring mounting pitch-circle diameter (pcd2)148 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 97 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7 through, φ9.5 counterbore depth 5.4 148 10-φ5.7 贯通 ,φ9.5 沉孔深度 5.4 10-φ5.7through, φ9.5 counterbore depth 5.4 Outside diameter (d)165 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Radial load rating (c)33.1 kN Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Radial load rating (co)50.9 kN Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Roller pitch circle diameter (dp)124 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Shaft diameter80 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Shoulder mounting dimension (dh)134 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Shoulder mounting dimension (ds)114 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 Width (b/b1)22 mm Manufacturer specification Configuration: BRU124(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 80 BRU124(G) 80 165 124 22 1 114 134 33.1 50.9 2.6 |
| BRU228X | 160 mmConfiguration: BRU228X | 12-M10 throughConfiguration: BRU228X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 184 mmConfiguration: BRU228X | 11.4 kgConfiguration: BRU228X | 2 mmConfiguration: BRU228X | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)160 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Inner-ring mounting-hole pattern12-M10 through Manufacturer specification Configuration: BRU228X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 BRU228X 12-M10 贯通 12-M10 through Inner-ring mounting pitch-circle diameter (pcd1)184 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 184 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 270 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 BRU228X 12-M10 贯通 12-M10 through Mass11.4 kg Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Minimum chamfer (r)2 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Outer-ring mounting-hole pattern12-φ11 through, φ17.5 counterbore depth 10.8 Manufacturer specification Configuration: BRU228X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 184 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 270 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 BRU228X 12-M10 贯通 12-M10 through Outer-ring mounting pitch-circle diameter (pcd2)270 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 184 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 270 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 BRU228X 12-M10 贯通 12-M10 through Outside diameter (d)295 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Radial load rating (c)104 kN Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Radial load rating (co)173 kN Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Roller pitch circle diameter (dp)227.5 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Shaft diameter160 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Shoulder mounting dimension (dh)246 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Shoulder mounting dimension (ds)208 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X Width (b/b1)35 mm Manufacturer specification Configuration: BRU228X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 BRU228X |
| BRU28 | 10 mmConfiguration: BRU28 | Not published | 16 mmConfiguration: BRU28 | 0.12 kgConfiguration: BRU28 | 0.3 mmConfiguration: BRU28 | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)10 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Inner-ring mounting pitch-circle diameter (pcd1)16 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 16 4-M3 贯通 6-M3 through 42 B6-Ф3. 4贯通，沉孔 Ф6. 5深 3.3 6-φ3.4 through, φ6.5 counterbore depth 3.3 Mass0.12 kg Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Minimum chamfer (r)0.3 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Outer-ring mounting pitch-circle diameter (pcd2)42 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 16 4-M3 贯通 6-M3 through 42 B6-Ф3. 4贯通，沉孔 Ф6. 5深 3.3 6-φ3.4 through, φ6.5 counterbore depth 3.3 Outside diameter (d)52 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Radial load rating (c)2.9 kN Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Radial load rating (co)2.4 kN Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Roller pitch circle diameter (dp)28.5 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Shaft diameter10 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Shoulder mounting dimension (dh)32 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Shoulder mounting dimension (ds)25 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 Width (b/b1)8 mm Manufacturer specification Configuration: BRU28 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 10 BRU28 10 52 28.5 8 0.3 25 32 2.9 2.4 0.12 |
| BRU297X | 210 mmConfiguration: BRU297X | 16-M12 throughConfiguration: BRU297X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 240 mmConfiguration: BRU297X | 21.3 kgConfiguration: BRU297X | 2.5 mmConfiguration: BRU297X | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)210 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Inner-ring mounting-hole pattern16-M12 through Manufacturer specification Configuration: BRU297X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 BRU297X 16-M12 贯通 16-M12 through Inner-ring mounting pitch-circle diameter (pcd1)240 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 240 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 350 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 BRU297X 16-M12 贯通 16-M12 through Mass21.3 kg Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Minimum chamfer (r)2.5 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Outer-ring mounting-hole pattern16-φ14 through, φ20 counterbore depth 13 Manufacturer specification Configuration: BRU297X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 240 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 350 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 BRU297X 16-M12 贯通 16-M12 through Outer-ring mounting pitch-circle diameter (pcd2)350 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 240 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 350 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 BRU297X 16-M12 贯通 16-M12 through Outside diameter (d)380 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Radial load rating (c)156 kN Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Radial load rating (co)281 kN Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Roller pitch circle diameter (dp)297.3 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Shaft diameter210 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Shoulder mounting dimension (dh)320 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Shoulder mounting dimension (ds)272 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X Width (b/b1)40 mm Manufacturer specification Configuration: BRU297X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 BRU297X |
| BRU297(G) | 210 mmConfiguration: BRU297(G) | 16-φ14 through, φ20 counterbore depth 13Configuration: BRU297(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 240 mmConfiguration: BRU297(G) | 21.3 kgConfiguration: BRU297(G) | 2.5 mmConfiguration: BRU297(G) | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)210 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Inner-ring mounting-hole pattern16-φ14 through, φ20 counterbore depth 13 Manufacturer specification Configuration: BRU297(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 240 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 350 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 Inner-ring mounting pitch-circle diameter (pcd1)240 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 240 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 350 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 Mass21.3 kg Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Minimum chamfer (r)2.5 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Outer-ring mounting-hole pattern16-φ14 through, φ20 counterbore depth 13 Manufacturer specification Configuration: BRU297(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 240 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 350 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 Outer-ring mounting pitch-circle diameter (pcd2)350 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 240 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 350 16-φ14 贯通 ,φ20 沉孔深度 13 16-φ14 through, φ20 counterbore depth 13 Outside diameter (d)380 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Radial load rating (c)156 kN Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Radial load rating (co)281 kN Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Roller pitch circle diameter (dp)297.3 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Shaft diameter210 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Shoulder mounting dimension (dh)320 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Shoulder mounting dimension (ds)272 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 Width (b/b1)40 mm Manufacturer specification Configuration: BRU297(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 210 BRU297(G) 210 380 297.3 40 2.5 272 320 156 281 21.3 |
| BRU228(G) | 160 mmConfiguration: BRU228(G) | 12-φ11 through, φ17.5 counterbore depth 10.8Configuration: BRU228(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 184 mmConfiguration: BRU228(G) | 11.4 kgConfiguration: BRU228(G) | 2 mmConfiguration: BRU228(G) | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)160 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Inner-ring mounting-hole pattern12-φ11 through, φ17.5 counterbore depth 10.8 Manufacturer specification Configuration: BRU228(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 184 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 270 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 Inner-ring mounting pitch-circle diameter (pcd1)184 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 184 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 270 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 Mass11.4 kg Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Minimum chamfer (r)2 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Outer-ring mounting-hole pattern12-φ11 through, φ17.5 counterbore depth 10.8 Manufacturer specification Configuration: BRU228(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 184 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 270 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 Outer-ring mounting pitch-circle diameter (pcd2)270 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 184 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 270 12-φ11 贯通 ,φ17.5 沉孔深度 10.8 12-φ11 through, φ17.5 counterbore depth 10.8 Outside diameter (d)295 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Radial load rating (c)104 kN Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Radial load rating (co)173 kN Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Roller pitch circle diameter (dp)227.5 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Shaft diameter160 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Shoulder mounting dimension (dh)246 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Shoulder mounting dimension (ds)208 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 Width (b/b1)35 mm Manufacturer specification Configuration: BRU228(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 160 BRU228(G) 160 295 227.5 35 2 208 246 104 173 11.4 |
| BRU42 | 20 mmConfiguration: BRU42 | 6-M3 throughConfiguration: BRU42; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 28 mmConfiguration: BRU42 | 0.29 kgConfiguration: BRU42 | 0.6 mmConfiguration: BRU42 | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)20 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Inner-ring mounting-hole pattern6-M3 through Manufacturer specification Configuration: BRU42; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 28 6-M3 贯通 6-M3 through 57 6-φ3.4 贯通 ,φ6.5 沉孔深度 3.3 6-φ3.4 through, φ6.5 counterbore depth 3.3 Inner-ring mounting pitch-circle diameter (pcd1)28 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 28 6-M3 贯通 6-M3 through 57 6-φ3.4 贯通 ,φ6.5 沉孔深度 3.3 6-φ3.4 through, φ6.5 counterbore depth 3.3 Mass0.29 kg Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Minimum chamfer (r)0.6 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Outer-ring mounting-hole pattern6-φ3.4 through, φ6.5 counterbore depth 3.3 Manufacturer specification Configuration: BRU42; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 28 6-M3 贯通 6-M3 through 57 6-φ3.4 贯通 ,φ6.5 沉孔深度 3.3 6-φ3.4 through, φ6.5 counterbore depth 3.3 Outer-ring mounting pitch-circle diameter (pcd2)57 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 28 6-M3 贯通 6-M3 through 57 6-φ3.4 贯通 ,φ6.5 沉孔深度 3.3 6-φ3.4 through, φ6.5 counterbore depth 3.3 Outside diameter (d)70 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Radial load rating (c)7.35 kN Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Radial load rating (co)8.35 kN Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Roller pitch circle diameter (dp)41.5 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Shaft diameter20 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Shoulder mounting dimension (dh)47 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Shoulder mounting dimension (ds)37 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 Width (b/b1)12 mm Manufacturer specification Configuration: BRU42 BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 20 BRU42 20 70 41.5 12 0.6 37 47 7.35 8.35 0.29 |
| BRU178(G) | 115 mmConfiguration: BRU178(G) | 12-φ9 through, φ14 counterbore depth 8.6Configuration: BRU178(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 139 mmConfiguration: BRU178(G) | 6.8 kgConfiguration: BRU178(G) | 1.5 mmConfiguration: BRU178(G) | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)115 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Inner-ring mounting-hole pattern12-φ9 through, φ14 counterbore depth 8.6 Manufacturer specification Configuration: BRU178(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 139 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 217 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 Inner-ring mounting pitch-circle diameter (pcd1)139 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 139 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 217 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 Mass6.8 kg Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Minimum chamfer (r)1.5 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Outer-ring mounting-hole pattern12-φ9 through, φ14 counterbore depth 8.6 Manufacturer specification Configuration: BRU178(G); Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 139 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 217 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 Outer-ring mounting pitch-circle diameter (pcd2)217 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 139 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 217 12-φ9 贯通 ,φ14 沉孔深度 8.6 12-φ9 through, φ14 counterbore depth 8.6 Outside diameter (d)240 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Radial load rating (c)80.3 kN Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Radial load rating (co)135 kN Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Roller pitch circle diameter (dp)178 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Shaft diameter115 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Shoulder mounting dimension (dh)195 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Shoulder mounting dimension (ds)161 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 Width (b/b1)28 mm Manufacturer specification Configuration: BRU178(G) BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 115 BRU178(G) 115 240 178 28 1.5 161 195 80.3 135 6.8 |
| BRU445X | 350 mmConfiguration: BRU445X | 24-M12 throughConfiguration: BRU445X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. | 385 mmConfiguration: BRU445X | 35.4 kgConfiguration: BRU445X | 2.5 mmConfiguration: BRU445X | Full specificationsSource-backed claimsSpecifications & evidenceSource-backed claims. Configuration, workload and evidence type matter when comparing products. Bore diameter (d)350 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Inner-ring mounting-hole pattern24-M12 through Manufacturer specification Configuration: BRU445X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 BRU445X 24-M12 贯通 24-M12 through Inner-ring mounting pitch-circle diameter (pcd1)385 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 385 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 505 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 BRU445X 24-M12 贯通 24-M12 through Mass35.4 kg Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Minimum chamfer (r)2.5 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Outer-ring mounting-hole pattern24-φ14 through, φ20 counterbore depth 13 Manufacturer specification Configuration: BRU445X; Hole count, metric thread and millimetre dimensions are retained as a combined pattern. BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 385 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 505 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 BRU445X 24-M12 贯通 24-M12 through Outer-ring mounting pitch-circle diameter (pcd2)505 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 385 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 505 24-φ14 贯通 ,φ20 沉孔深度 13 24-φ14 through, φ20 counterbore depth 13 BRU445X 24-M12 贯通 24-M12 through Outside diameter (d)540 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Radial load rating (c)222 kN Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Radial load rating (co)473 kN Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Roller pitch circle diameter (dp)445.4 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Shaft diameter350 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Shoulder mounting dimension (dh)473 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Shoulder mounting dimension (ds)417 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X Width (b/b1)45 mm Manufacturer specification Configuration: BRU445X BRU(CRBF)交叉滚子轴承-洛阳博盈轴承有限公司 350 BRU445(G) 350 540 445.4 45 2.5 417 473 222 473 35.4 BRU445X |
Related products
Build connections across China’s robotics ecosystem.
Share your team background and technical or sourcing goals. We’ll check availability with relevant company representatives and coordinate the next steps.
How it works
How to initiate connections
-
Define your requirements
Select your target companies and dates, and share your team background and technical or sourcing goals.
-
We facilitate connections
We identify relevant company representatives, discuss your requirements and check availability.
-
Confirm your schedule
Review the proposed agenda, arrangements and fees, then confirm your schedule by email.
Review your request.
Fees apply and vary based on the companies you select and the final arrangements. Your preferred dates are provisional. Our team will confirm the schedule based on the availability of our staff and the selected companies.
Build Robotics
Partnerships in China
Connect with robotics manufacturers matched to your project, discuss technical requirements, and evaluate solutions firsthand.
Initiate ConnectionFind the Right Robot Companies.
Already have a company in mind? Ask for an introduction. For sourcing, integration or deployment, tell us about your project.
02 / DISCOVER THE MOST ADVANCED ROBOTS.
Products to explore.
FIND YOUR NEXT ROBOTICS PARTNER
The company directory.
Connect with robotics teams.
Meet the people behind the products. Plan company visits and technical conversations around your project.
Initiate connectionHumanoid robots
Discover and compare humanoid robots from around the world.
No matching robots.
Robotics is better
in person.
Step inside a working showcase of robotics, from humanoids and helpful machines to the parts that bring them to life.
50+exhibiting companies
Hands-onrobot operation & live demos
~1 hourto explore, try, and ask
Sky decka new view of Shenzhen
Inside the showroom
One visit.
A whole world of robotics.
Explore complete machines, real-world applications, and the components behind them. Get a closer look at the variety on display.
Showing all 8 exhibit highlights.
Interaction
Meet a humanoid
A first handshake. A playful boxing pose. See how robots move alongside us.
Service robots
Robots at your service
Discover a service robot in a shop-counter setting, with objects it can handle.
Robot dogs
Four legs. New possibilities.
Take a closer look at robot dogs and the mechanics that keep them moving.
Dexterous hands
The detail is in the hands
Explore the dexterous hands that turn movement into precise manipulation.
Humanoids
A full-body perspective
Get close to the joints, sensors, and structure of a full-size humanoid.
Wearable robotics
Technology you can wear
Discover wearable assistance alongside robots built for very different environments.
Real-world applications
From the lab to daily life
Explore practical applications, including automated cooking and everyday services.
Core components
What makes a robot work?
Look beyond the body to the components and engineering that make it possible.
A glimpse of what’s inside. Exhibits and live demonstrations may vary by visit.
More than a display
Watch it move.
Then have a go.
The best questions come when you’re standing right beside a robot. A guided visit brings the hardware, the demonstrations, and the conversation together.
- 01
Get your bearings
Follow the showroom route and discover how different robots are used.
- 02
Try robot operation
Get hands-on with selected robots through guided interaction.
- 03
Keep the conversation going
Ask about the technology, share your interests, and explore what comes next.
Beyond the showroom
Step outside.
See the bigger picture.
The sky deck opens onto Shenzhen’s skyline and surrounding mountains. Take in the place where robotics companies, researchers, and makers are building what comes next.
Curiosity brings us together
Come with questions.
Leave with possibilities.
For the simply curious, the people building, and the teams exploring their next idea. Robot Valley is a place to see the technology and talk about where it could go.
Curious visitorsStudents & researchersBuilders & foundersCompany teams
Plan your visit
A little planning.
A lot to discover.
- Where
- Nanshan, Shenzhen, China
- Allow
- Approximately one hour
- Booking
- By appointment
Choose your preferred date and group size on the booking page. The team will confirm the arrangements with you.
What’s included in the visit?
A guided showroom experience with hands-on robot operation and interactive demonstrations. You’ll have time to ask questions and explore the exhibits. Specific robots and activities depend on the day’s arrangements.
Do I need to book in advance?
Yes. Visits are by appointment. Use the booking page to choose your preferred date and share your group details. The team will confirm availability, fees, and arrangements before your visit.
Can I bring a team or student group?
Tell us your group size and interests when booking. Company teams, students, researchers, and other groups can discuss their priorities with the team before the visit.
Can we focus on a particular technology?
Share the robots, applications, or components you’re interested in with your booking request. The team can discuss what’s available and suitable for your visit.
Something else on your mind? info@robotuo.com
Your next encounter with robotics
Come curious.
Leave inspired.
Book the visit experience
Real robots. Real conversations.
See you in Shenzhen.
About Robotuo
Connecting the world to China’s robotics ecosystem.
Get closer to the people, technology, and opportunities shaping robotics in China.
Local knowledge / Firsthand insight / Global reach
About us
Build in China.
Reach the world.
We connect global teams with China’s robotics supply chain and the SZ RoboX open-source community to find partners, share expertise, and bring robotics to new markets.
For companies, developers, and entrepreneurs building what comes next in robotics.
- Companies in our network
- 500+
- International visits hosted
- 200+
- Countries & regions
- 30+
Robotics supply chain
Access robotics, AI hardware, and component suppliers in China. Find partners that fit your business.
Firsthand partnerships
Understand Chinese businesses, explore technical capabilities, and find opportunities for collaboration.
Global Connections, Backed by Experience
With over 1,000 business visitors and buyers served across more than 20 countries and regions, we draw on international experience to connect teams with robotics industry resources.
OUR MISSION
Turn shared knowledge into real-world robotics.
We combine supply chain integration and open-source deployment standards to support robotics applications worldwide.
For Companies
Bring Open-Source Innovation into Practice
We combine supply chain integration with the development of open-source deployment standards, connecting technology and hardware resources to support robotics applications worldwide.
For Developers & Entrepreneurs
Find Your Community. Discover New Opportunities.
Join the SZ RoboX open-source robotics community to exchange technical knowledge with developers and entrepreneurs, follow global industry developments, and explore opportunities to innovate and collaborate.
YOUR PRIVACY
Privacy Policy.
How this website uses information, and the choices you can make.
About this policy
Last updated: .
Robotuo is responsible for the personal information processed through this website.
This policy covers browsing Robotuo, local preferences, and our planned use of Google Analytics through Firebase and OneSignal web push notifications. These optional services only run when enabled on the site and you have agreed to the relevant category.
Browsing and essential information
You can browse without an account or agreeing to optional services. Our hosting provider receives your IP address, requested URL, browser information, and request time to deliver and protect the site. Our basis for this processing is our legitimate interest in operating a secure, reliable website.
We store your privacy choices in this browser so we can respect them. This essential preference includes the policy version, your choices, and when you made them; it is not sent to an analytics service. Hosting and security logs are separate from these browser settings.
Saved selections and follows
With your consent, “Remember my selections” stores selected and followed companies and products in this browser. These are not synced to an account or shared with Google or OneSignal by our integration. Without consent, these features still work for the current page session.
Turning this option off deletes saved selections from local storage. Current selections remain in memory until you reload or close the page.
Google Analytics through Firebase
With analytics consent, we use the Google Analytics web stream linked to our Firebase project to understand which parts of Robotuo are used and improve the website. Google processes online identifiers, cookie identifiers, browser and device information, general page categories, and usage events. IP addresses are used by Google during collection, including to derive approximate location.
Our integration uses general page categories rather than search terms, full query strings, or individual company and product identifiers. With analytics consent, we also measure visits attributed to recognized AI services and confirmed Connect requests from those visits. We send a fixed provider label and page category, without sending the original referral URL or form contents. Attribution lasts only within the current page session and may be incomplete. We do not send application form contents, names, or email addresses to Analytics. Advertising consent remains off; Google signals and advertising personalization are disabled in our integration.
The Google tag is not loaded before analytics consent. Declining analytics does not enable cookieless analytics pings. Learn more in Google’s Privacy Policy and Firebase’s privacy information.
OneSignal notifications
With notification consent, OneSignal helps us deliver Robotuo news and updates. It processes subscription and device identifiers, push tokens, browser and operating system information, IP address, language, and notification delivery and interaction information. This service may use browser storage and a service worker to deliver notifications even when the website is closed.
Saving consent does not grant browser permission. Open Privacy settings, save your notification choice, then select “Enable notifications” and allow notifications in your browser if prompted. You can withdraw consent here or block notifications in your browser’s site settings.
Withdrawal disables further SDK data collection and attempts to unsubscribe this browser from push messages. It does not automatically erase information already held by OneSignal. See OneSignal’s Privacy Policy.
Cookies, storage, and retention
Our essential robotuo-privacy record is kept in local storage and is valid for 180 days. We ask again when it expires or the consent version changes. Saved selections use robotuo-catalog-follows, robotuo-product-follows, and robotuo-follow-labels; they stay until you withdraw that choice, your consent expires, or you clear site data.
When analytics is enabled with consent, Google uses cookies such as _ga and _ga_*. Our integration limits these cookies to 180 days without automatic renewal. Withdrawing analytics consent disables collection and removes accessible Analytics cookies for this site. Cookie expiry is separate from the retention of data already received by Google.
OneSignal stores subscription information in browser storage and its service worker. Vendor-held records and hosting logs follow the retention settings and obligations applicable to those services; withdrawing consent does not itself delete previously collected records. You can request erasure where applicable.
Your choices and rights
Use “Reject all,” “Accept all,” or individual choices in Privacy settings. Optional categories are off by default. Closing settings or continuing to browse does not give consent. The Privacy settings button is available in the footer throughout the site. Withdrawing consent is as easy as giving it and does not affect the lawfulness of processing before withdrawal.
Where the GDPR or UK GDPR applies, you may request access, correction, erasure, restriction, or portability of your personal information and object to processing based on legitimate interests. You may complain to your local data protection authority. We normally respond to rights requests within one month, subject to applicable extensions and identity verification.
Privacy contact details will be published before optional services are activated.
Clearing browser data resets these choices. To stop push notifications, also disable notification permission in your browser; clearing site data alone may not withdraw permission. Choices apply to this browser, not every device you use.
Service providers and international processing
Our hosting provider, Google, OneSignal, and the browser’s push delivery provider may process technical information needed for their respective services. Processing may take place outside your country, including in the United States. Where required, transfers need appropriate safeguards, such as applicable adequacy decisions or standard contractual clauses. You may request information about safeguards that apply to your data.
Saved selections, analytics, and notification processing rely on your consent. We do not sell the information collected through these features or use it for advertising in this integration.
Search, applications, and external websites
Search terms filter content in your browser and may appear in the page URL. Avoid entering sensitive information into search. Application and issue-report drafts stay in this page until you choose Send. Sending shares the information you entered and the relevant page with Robotuo through our hosting provider and Feishu, where our team reviews it and follows up. Do not include sensitive personal information. These submissions work independently of optional analytics and notification preferences.
To limit repeated requests, our server processes your IP address and stores a keyed hash with short-lived counters. When deployed with our shared Upstash Redis store, it stores these hashes, submission identifiers and delivery state for up to 24 hours; form contents are not stored there. Application and report records remain in Feishu for team review and follow-up. Contact Robotuo about access or deletion using the contact information in this policy.
Reloading or closing the page clears unsent drafts. Visit previews do not send a booking. Company websites and the Robot Valley booking page are separate websites with their own privacy practices. Review their policies before submitting personal details.