Product family

GSS Overlap-Type Ball Screw with Ball Spline

2 variants · Varies by Shaft nominal diameter, Lead, Ball screw basic dynamic load Ca

About this product family

KGG miniature overlap-type screw-spline assemblies with end-cap nuts for compact SCARA robot head mechanisms. Three catalogue standard model rows differ by shaft diameter, lead and reference ratings.

Compare variants

Values retain their source conditions and claim stage. A missing value means it has not been published in this catalogue.

Variant / model	Ball screw basic dynamic load ca	Ball screw basic static load coa	Ball screw bolt pitch diameter dp	Ball screw flange mounting holes	Ball screw mounting hole diameter x	Details & evidence
GSS 0606	600 NConfiguration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference.	900 NConfiguration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference.	21 mmConfiguration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass.	4Configuration: GSS 0606 — overlap type; Four holes of table diameter X; drawing depicts two 30° angular offsets.	3.4 mmConfiguration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Ball screw basic dynamic load ca 600 N Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw basic static load coa 900 N Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw bolt pitch diameter dp 21 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw flange mounting holes 4 Manufacturer specification Configuration: GSS 0606 — overlap type; Four holes of table diameter X; drawing depicts two 30° angular offsets. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance 4-φX Ball screw mounting hole diameter x 3.4 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut axial face runout 8 μm Manufacturer specification Configuration: GSS 0606 — C3; nut OD ≤20 mm; Maximum perpendicularity runout of nut location face relative to screw-shaft centreline. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-2 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 8 C5 10 Ball screw nut axial face runout 10 μm Manufacturer specification Configuration: GSS 0606 — C5; nut OD ≤20 mm; Maximum perpendicularity runout of nut location face relative to screw-shaft centreline. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-2 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 8 C5 10 Ball screw nut bearing mounting Bracket-supported or directly on nut exterior Manufacturer specification Configuration: GSS 0606 — overlap type; Special nut profile depends on mounting request; consult KGG for final design. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance There would be a couple of ways to install Bearings onto Ball Screw Nut, such as using Bracket as Bearing shaft, direct mounting on Ball Screw Nut. Ball screw nut d 14 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut diameter fit g6 Manufacturer specification Configuration: GSS 0606 — overlap type; Drawing fit; no inferred numerical g6 deviation. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance φD(g6) Ball screw nut flange df 27 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut flange thickness f 4 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut l 17 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut l1 8 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut load restriction Axial thrust; no applied radial or moment loads Manufacturer specification Configuration: GSS 0606 — overlap type; Restriction applies specifically to ball screw nut, not spline reference load table. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Ball Screw Nut primarily generate thrusts in the axial direction, and are not designed to withstand Radial loads and Moment loads. Ball screw nut mass 20 g Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut radial runout 9 μm Manufacturer specification Configuration: GSS 0606 — C3; nut OD ≤20 mm; Maximum radial runout of nut location diameter relative to screw-shaft centreline; selected D is 14 or 18 mm. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-1 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 9 C5 12 \| Ball Spline Nut 11 Ball screw nut radial runout 12 μm Manufacturer specification Configuration: GSS 0606 — C5; nut OD ≤20 mm; Maximum radial runout of nut location diameter relative to screw-shaft centreline; selected D is 14 or 18 mm. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-1 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 9 C5 12 \| Ball Spline Nut 11 Ball screw nut type Type 2 — end-cap recirculation Manufacturer specification Configuration: GSS 0606 — overlap type; Native drawing and table both identify end-cap type2. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut w 16 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline basic dynamic load cr 650 N Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline basic dynamic torque ct 1.7 N·m Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline basic static load cor 1,000 N Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline basic static torque cot 1.2 N·m Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline dimension t 1.2 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline dimension t tolerance +0.08 / -0.02 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Drawing tolerance applies to t. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance t +0.08 -0.02 Ball spline nut diameter tolerance +0 / -0.011 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Drawing tolerance applies to Ds. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance φDs 0 -0.011 Ball spline nut length ls 27 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline nut length tolerance +0 / -0.2 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Drawing tolerance applies to Ls, not to complete shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Ls 0 -0.2 Ball spline nut mass 14 g Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline nut mounting Pin hole and adhesive Manufacturer specification Configuration: GSS 0606 — overlap type; The pin must not carry load; this is manufacturer installation guidance. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Ball Spline Nut should be mounted using pin-hole located on Nut outer, and adhesive. Please make sure that no load would be applied on pin when using pin-hole. Ball spline nut outside diameter ds 12 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline nut radial runout 11 μm Manufacturer specification Configuration: GSS 0606 — overlap type; Maximum radial runout; nut outside diameter≤20mm. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-1 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 9 C5 12 \| Ball Spline Nut 11 Ball spline permissible moment mo 2.2 N·m Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline pin-hole diameter b 1.5 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline pin-hole tolerance +0.05 / -0 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Drawing tolerance applies to diameter b. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance φb +0.05 0 Dust protection Clean environment with dustproof cover Manufacturer specification Configuration: GSS 0606 — overlap type; No numerical IP rating is stated. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Ball Screws must be used in a clean environment. They should be used with a dustproof cover to prevent contamination from dust or swarf. Heat treatment Induction hardening Manufacturer specification Configuration: GSS 0606 — standard hollow shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Hollow Shaft \| SUJ2 \| Induction hardening \| HRC 58-62 Heat treatment Carburizing and quenching Manufacturer specification Configuration: GSS 0606 — standard nut; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Nut \| SCM415 \| Carburizing and quenching \| HRC 58-62 Heat treatment Carburizing and quenching Manufacturer specification Configuration: GSS 0606 — standard solid shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Solid Shaft \| SCM415 \| Carburizing and quenching \| HRC 58-62 Lead 6 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Lubricant inspection interval 2–3 months Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue maintenance guidance; operating conditions may require additional inspection. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Please check the lubricant condition every 2 to 3months. If Grease is contaminated, remove old Grease, and replace with new Grease. Lubricant recommendation GHY No.2 lithium grease or ISO VG32–68 oil Manufacturer specification Configuration: GSS 0606 — overlap type; Manufacturer normal-condition recommendation; original GHY No.2 grease is recommended when no specific request. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance For lubrication of GSS, our original grease and ISO turbine Oil #1 to #3 are recommended. VG32-68 Oil GSS are applied with anti-rust oil for rust prevention, if there is no designation when shipping. Since anti-rust oil is not lubricant, apply Grease or Lubrication oil before using GSS. If there is no specific request, KGG would recommend our original grease GHY No.2 as standard lubricant. We can apply designated Grease before shipping, please ask KGG representative. F-6 : Table F-6 : Recommended lubricants for normal operating conditions 6 Ball Spline Nut should be mounted using pin-hole located on Nut outer, and adhesive. Please make sure that no load would be applied on pin when using pin-hole. Lubricant Type Product name Grease Lithium-based Grease KGG original Grease GHY No.2 Lubrication before operation Remove anti-rust oil and apply grease or lubrication oil Manufacturer specification Configuration: GSS 0606 — overlap type; Anti-rust oil is the default shipping protection, not operational lubricant. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Since anti-rust oil is not lubricant Grease / Oil , Anti-rust oil on GSS should be washed off with clean Kerosene and apply lubricant before using GSS. Material SUJ2 Manufacturer specification Configuration: GSS 0606 — standard hollow shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Hollow Shaft \| SUJ2 \| Induction hardening \| HRC 58-62 Material SCM415 Manufacturer specification Configuration: GSS 0606 — standard nut; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Nut \| SCM415 \| Carburizing and quenching \| HRC 58-62 Material SCM415 Manufacturer specification Configuration: GSS 0606 — standard solid shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Solid Shaft \| SCM415 \| Carburizing and quenching \| HRC 58-62 Maximum axial play 0.005 mm Manufacturer specification Configuration: GSS 0606 — overlap type; General GSS overlap table; applies to C3/C5 accuracy-grade options. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Overlap type \| Ball Screw (Axial play) \| C3 C5 (Maximum) \| 0.005 Maximum-load reference 10 N Manufacturer specification Configuration: GSS 0606 — overlap type; Overlap-type catalogue note5. Load direction/test conditions are not specified. Do not equate the theoretical basic load ratings with an allowable operating payload. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Maximum Load Capacity should be considered 10N. Maximum radial play 0.002 mm Manufacturer specification Configuration: GSS 0606 — overlap type; General GSS overlap table; applies to C3/C5 accuracy-grade options. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Overlap type \| Ball Spline (Radial play) \| C3 C5 (Maximum) \| 0.002 Mean travel error limit ±8 μm Manufacturer specification Configuration: GSS 0606 — C3; effective screw length ≤100 mm; Specified-travel error ep, conditional on accuracy grade and effective screw length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over — Up to100 \| C3 ±ep8 Vu8 \| C5 ±ep18 Vu18 Mean travel error limit ±10 μm Manufacturer specification Configuration: GSS 0606 — C3; effective screw length >100 to200 mm; Specified-travel error ep, conditional on accuracy grade and effective screw length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over100 Up to200 \| C3 ±ep10 Vu8 \| C5 ±ep20 Vu18 Mean travel error limit ±18 μm Manufacturer specification Configuration: GSS 0606 — C5; effective screw length ≤100 mm; Specified-travel error ep, conditional on accuracy grade and effective screw length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over — Up to100 \| C3 ±ep8 Vu8 \| C5 ±ep18 Vu18 Mean travel error limit ±20 μm Manufacturer specification Configuration: GSS 0606 — C5; effective screw length >100 to200 mm; Specified-travel error ep, conditional on accuracy grade and effective screw length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over100 Up to200 \| C3 ±ep10 Vu8 \| C5 ±ep20 Vu18 Motion functions Linear motion, rotation and optional suction/blow Manufacturer specification Configuration: GSS 0606 — overlap type; Suction/blow requires optional hollow bore; no motor is included. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance This is a combined product which is possible for linear and rotational movement as well as suction at the same time with one unit. · Achieved developing very compact product as "Overlap type" using Miniature Ball Screws and Miniature Ball Splines. Ball Screw Nut Ball Spline Nut Ball Spline Nut Ball Screw Nut Belt Drive Ball Screw Nut Air Ball Spline Nut Bore hollow Bore hollow can be multi uses. For example vacuum and blow function. Operating humidity <80 %RH Manufacturer specification Configuration: GSS 0606 — overlap type; General GSS operating environment. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS should be used under the temperature of -20℃～80℃, and humidity of less than 80%RH. Operating speed selection Consult KGG for critical speed and permissible axial load Manufacturer specification Configuration: GSS 0606 — overlap type; No numerical maximum speed is published for these rows; machine-specific selection is required. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS has the maximum limit of speed and Axial load depending on its size, material, mounting method etc. Operating temperature -20 to 80 °C Manufacturer specification Configuration: GSS 0606 — overlap type; General GSS recommended operating environment; consult KGG beyond these limits. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS should be used under the temperature of -20℃～80℃, and humidity of less than 80%RH. Optional hollow bore diameter 2 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Optional hollow bore, not standard; availability depends on shaft length. It supports suction/blow functions when supplied. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Shaft inertia per unit length 0.000000000999 kg·m²/mm Manufacturer specification Configuration: GSS 0606 — overlap type; Literal catalogue unit Kgm²/mm; value is per shaft length, not complete assembly inertia. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Shaft nominal diameter 6 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0606 \| 6 \| 6 \| (600) \| (900) \| 2 \| 20 \| 14 \| 27 \| 17 \| 8 \| 4 \| 16 \| 21 \| 3.4 \| (650) \| (1000) \| (1.7) \| (1.2) \| (2.2) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Shaft total radial runout 25 μm Manufacturer specification Configuration: GSS 0606 — C3; total shaft length ≤125 mm; General accuracy table; applies only when selected shaft length is in this bracket. Nominal model does not determine ordered shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-3 \| Unit(单位):μm \| Shaft total length (mm) \| Over — Up to125 \| C3 25 C5 35 Shaft total radial runout 35 μm Manufacturer specification Configuration: GSS 0606 — C3; total shaft length >125 to200 mm; General accuracy table; applies only when selected shaft length is in this bracket. Nominal model does not determine ordered shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-3 \| Unit(单位):μm \| Shaft total length (mm) \| Over125 Up to200 \| C3 35 C5 50 Shaft total radial runout 35 μm Manufacturer specification Configuration: GSS 0606 — C5; total shaft length ≤125 mm; General accuracy table; applies only when selected shaft length is in this bracket. Nominal model does not determine ordered shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-3 \| Unit(单位):μm \| Shaft total length (mm) \| Over — Up to125 \| C3 25 C5 35 Shaft total radial runout 50 μm Manufacturer specification Configuration: GSS 0606 — C5; total shaft length >125 to200 mm; General accuracy table; applies only when selected shaft length is in this bracket. Nominal model does not determine ordered shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-3 \| Unit(单位):μm \| Shaft total length (mm) \| Over125 Up to200 \| C3 35 C5 50 Standard shaft length limit 150 mm Manufacturer specification Configuration: GSS 0606 — overlap type; Catalogue overlap-table note; consult KGG beyond this limit. GSS0610 detailed drawing elsewhere shows a 230 axial-span callout with unresolved example/configuration applicability; it is not silently substituted as the standard limit. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Maximum limit of Shaft length is 150mm for f6 , 200mm for f8 . Storage humidity <80 %RH Manufacturer specification Configuration: GSS 0606 — overlap type; No dew condensation. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Please store GSS under -20℃～80℃, less than 80%RH humidity without any dew condensation. Storage temperature -20 to 80 °C Manufacturer specification Configuration: GSS 0606 — overlap type; Store unopened in original packaging, without condensation. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Please store GSS under -20℃～80℃, less than 80%RH humidity without any dew condensation. Surface hardness 58–62 HRC Manufacturer specification Configuration: GSS 0606 — standard hollow shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Hollow Shaft \| SUJ2 \| Induction hardening \| HRC 58-62 Surface hardness 58–62 HRC Manufacturer specification Configuration: GSS 0606 — standard nut; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Nut \| SCM415 \| Carburizing and quenching \| HRC 58-62 Surface hardness 58–62 HRC Manufacturer specification Configuration: GSS 0606 — standard solid shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Solid Shaft \| SCM415 \| Carburizing and quenching \| HRC 58-62 Travel variation limit vu 8 μm Manufacturer specification Configuration: GSS 0606 — C3; effective screw length ≤100 mm; Travel variation over effective screw length, not per-revolution accuracy. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over — Up to100 \| C3 ±ep8 Vu8 \| C5 ±ep18 Vu18 Travel variation limit vu 8 μm Manufacturer specification Configuration: GSS 0606 — C3; effective screw length >100 to200 mm; Travel variation over effective screw length, not per-revolution accuracy. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over100 Up to200 \| C3 ±ep10 Vu8 \| C5 ±ep20 Vu18 Travel variation limit vu 18 μm Manufacturer specification Configuration: GSS 0606 — C5; effective screw length ≤100 mm; Travel variation over effective screw length, not per-revolution accuracy. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over — Up to100 \| C3 ±ep8 Vu8 \| C5 ±ep18 Vu18 Travel variation limit vu 18 μm Manufacturer specification Configuration: GSS 0606 — C5; effective screw length >100 to200 mm; Travel variation over effective screw length, not per-revolution accuracy. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over100 Up to200 \| C3 ±ep10 Vu8 \| C5 ±ep20 Vu18
GSS 0610	650 NConfiguration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference.	900 NConfiguration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference.	21 mmConfiguration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass.	4Configuration: GSS 0610 — overlap type; Four holes of table diameter X; drawing depicts two 30° angular offsets.	3.4 mmConfiguration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Ball screw basic dynamic load ca 650 N Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw basic static load coa 900 N Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw bolt pitch diameter dp 21 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw flange mounting holes 4 Manufacturer specification Configuration: GSS 0610 — overlap type; Four holes of table diameter X; drawing depicts two 30° angular offsets. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance 4-φX Ball screw mounting hole diameter x 3.4 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut axial face runout 8 μm Manufacturer specification Configuration: GSS 0610 — C3; nut OD ≤20 mm; Maximum perpendicularity runout of nut location face relative to screw-shaft centreline. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-2 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 8 C5 10 Ball screw nut axial face runout 10 μm Manufacturer specification Configuration: GSS 0610 — C5; nut OD ≤20 mm; Maximum perpendicularity runout of nut location face relative to screw-shaft centreline. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-2 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 8 C5 10 Ball screw nut bearing mounting Bracket-supported or directly on nut exterior Manufacturer specification Configuration: GSS 0610 — overlap type; Special nut profile depends on mounting request; consult KGG for final design. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance There would be a couple of ways to install Bearings onto Ball Screw Nut, such as using Bracket as Bearing shaft, direct mounting on Ball Screw Nut. Ball screw nut d 14 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut diameter fit g6 Manufacturer specification Configuration: GSS 0610 — overlap type; Drawing fit; no inferred numerical g6 deviation. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance φD(g6) Ball screw nut flange df 27 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut flange thickness f 4 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut l 23 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut l1 11.5 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut load restriction Axial thrust; no applied radial or moment loads Manufacturer specification Configuration: GSS 0610 — overlap type; Restriction applies specifically to ball screw nut, not spline reference load table. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Ball Screw Nut primarily generate thrusts in the axial direction, and are not designed to withstand Radial loads and Moment loads. Ball screw nut mass 20 g Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut radial runout 9 μm Manufacturer specification Configuration: GSS 0610 — C3; nut OD ≤20 mm; Maximum radial runout of nut location diameter relative to screw-shaft centreline; selected D is 14 or 18 mm. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-1 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 9 C5 12 \| Ball Spline Nut 11 Ball screw nut radial runout 12 μm Manufacturer specification Configuration: GSS 0610 — C5; nut OD ≤20 mm; Maximum radial runout of nut location diameter relative to screw-shaft centreline; selected D is 14 or 18 mm. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-1 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 9 C5 12 \| Ball Spline Nut 11 Ball screw nut type Type 2 — end-cap recirculation Manufacturer specification Configuration: GSS 0610 — overlap type; Native drawing and table both identify end-cap type2. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball screw nut w 16 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline basic dynamic load cr 750 N Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline basic dynamic torque ct 1.9 N·m Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline basic static load cor 1,200 N Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline basic static torque cot 1.3 N·m Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline dimension t 1.2 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline dimension t tolerance +0.08 / -0.02 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Drawing tolerance applies to t. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance t +0.08 -0.02 Ball spline nut diameter tolerance +0 / -0.011 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Drawing tolerance applies to Ds. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance φDs 0 -0.011 Ball spline nut length ls 27 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline nut length tolerance +0 / -0.2 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Drawing tolerance applies to Ls, not to complete shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Ls 0 -0.2 Ball spline nut mass 14 g Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline nut mounting Pin hole and adhesive Manufacturer specification Configuration: GSS 0610 — overlap type; The pin must not carry load; this is manufacturer installation guidance. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Ball Spline Nut should be mounted using pin-hole located on Nut outer, and adhesive. Please make sure that no load would be applied on pin when using pin-hole. Ball spline nut outside diameter ds 12 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline nut radial runout 11 μm Manufacturer specification Configuration: GSS 0610 — overlap type; Maximum radial runout; nut outside diameter≤20mm. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-1 \| Unit(单位):μm \| Nut outside diameter (mm) \| Over — Up to20 \| Ball Screw Nut C3 9 C5 12 \| Ball Spline Nut 11 Ball spline permissible moment mo 2.4 N·m Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue reference rating calculated from effective ball count, not allowable application payload. Manufacturer warns actual conditions can change it drastically; final machine evaluation is required. Separate catalogue note specifies a 10 N maximum-load reference. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline pin-hole diameter b 1.5 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Ball spline pin-hole tolerance +0.05 / -0 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Drawing tolerance applies to diameter b. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance φb +0.05 0 Dust protection Clean environment with dustproof cover Manufacturer specification Configuration: GSS 0610 — overlap type; No numerical IP rating is stated. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Ball Screws must be used in a clean environment. They should be used with a dustproof cover to prevent contamination from dust or swarf. Heat treatment Induction hardening Manufacturer specification Configuration: GSS 0610 — standard hollow shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Hollow Shaft \| SUJ2 \| Induction hardening \| HRC 58-62 Heat treatment Carburizing and quenching Manufacturer specification Configuration: GSS 0610 — standard nut; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Nut \| SCM415 \| Carburizing and quenching \| HRC 58-62 Heat treatment Carburizing and quenching Manufacturer specification Configuration: GSS 0610 — standard solid shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Solid Shaft \| SCM415 \| Carburizing and quenching \| HRC 58-62 Lead 10 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Lubricant inspection interval 2–3 months Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue maintenance guidance; operating conditions may require additional inspection. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Please check the lubricant condition every 2 to 3months. If Grease is contaminated, remove old Grease, and replace with new Grease. Lubricant recommendation GHY No.2 lithium grease or ISO VG32–68 oil Manufacturer specification Configuration: GSS 0610 — overlap type; Manufacturer normal-condition recommendation; original GHY No.2 grease is recommended when no specific request. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance For lubrication of GSS, our original grease and ISO turbine Oil #1 to #3 are recommended. VG32-68 Oil GSS are applied with anti-rust oil for rust prevention, if there is no designation when shipping. Since anti-rust oil is not lubricant, apply Grease or Lubrication oil before using GSS. If there is no specific request, KGG would recommend our original grease GHY No.2 as standard lubricant. We can apply designated Grease before shipping, please ask KGG representative. F-6 : Table F-6 : Recommended lubricants for normal operating conditions 6 Ball Spline Nut should be mounted using pin-hole located on Nut outer, and adhesive. Please make sure that no load would be applied on pin when using pin-hole. Lubricant Type Product name Grease Lithium-based Grease KGG original Grease GHY No.2 Lubrication before operation Remove anti-rust oil and apply grease or lubrication oil Manufacturer specification Configuration: GSS 0610 — overlap type; Anti-rust oil is the default shipping protection, not operational lubricant. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Since anti-rust oil is not lubricant Grease / Oil , Anti-rust oil on GSS should be washed off with clean Kerosene and apply lubricant before using GSS. Material SUJ2 Manufacturer specification Configuration: GSS 0610 — standard hollow shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Hollow Shaft \| SUJ2 \| Induction hardening \| HRC 58-62 Material SCM415 Manufacturer specification Configuration: GSS 0610 — standard nut; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Nut \| SCM415 \| Carburizing and quenching \| HRC 58-62 Material SCM415 Manufacturer specification Configuration: GSS 0610 — standard solid shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Solid Shaft \| SCM415 \| Carburizing and quenching \| HRC 58-62 Maximum axial play 0.005 mm Manufacturer specification Configuration: GSS 0610 — overlap type; General GSS overlap table; applies to C3/C5 accuracy-grade options. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Overlap type \| Ball Screw (Axial play) \| C3 C5 (Maximum) \| 0.005 Maximum-load reference 10 N Manufacturer specification Configuration: GSS 0610 — overlap type; Overlap-type catalogue note5. Load direction/test conditions are not specified. Do not equate the theoretical basic load ratings with an allowable operating payload. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Maximum Load Capacity should be considered 10N. Maximum radial play 0.002 mm Manufacturer specification Configuration: GSS 0610 — overlap type; General GSS overlap table; applies to C3/C5 accuracy-grade options. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Overlap type \| Ball Spline (Radial play) \| C3 C5 (Maximum) \| 0.002 Mean travel error limit ±8 μm Manufacturer specification Configuration: GSS 0610 — C3; effective screw length ≤100 mm; Specified-travel error ep, conditional on accuracy grade and effective screw length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over — Up to100 \| C3 ±ep8 Vu8 \| C5 ±ep18 Vu18 Mean travel error limit ±10 μm Manufacturer specification Configuration: GSS 0610 — C3; effective screw length >100 to200 mm; Specified-travel error ep, conditional on accuracy grade and effective screw length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over100 Up to200 \| C3 ±ep10 Vu8 \| C5 ±ep20 Vu18 Mean travel error limit ±18 μm Manufacturer specification Configuration: GSS 0610 — C5; effective screw length ≤100 mm; Specified-travel error ep, conditional on accuracy grade and effective screw length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over — Up to100 \| C3 ±ep8 Vu8 \| C5 ±ep18 Vu18 Mean travel error limit ±20 μm Manufacturer specification Configuration: GSS 0610 — C5; effective screw length >100 to200 mm; Specified-travel error ep, conditional on accuracy grade and effective screw length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over100 Up to200 \| C3 ±ep10 Vu8 \| C5 ±ep20 Vu18 Motion functions Linear motion, rotation and optional suction/blow Manufacturer specification Configuration: GSS 0610 — overlap type; Suction/blow requires optional hollow bore; no motor is included. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance This is a combined product which is possible for linear and rotational movement as well as suction at the same time with one unit. · Achieved developing very compact product as "Overlap type" using Miniature Ball Screws and Miniature Ball Splines. Ball Screw Nut Ball Spline Nut Ball Spline Nut Ball Screw Nut Belt Drive Ball Screw Nut Air Ball Spline Nut Bore hollow Bore hollow can be multi uses. For example vacuum and blow function. Operating humidity <80 %RH Manufacturer specification Configuration: GSS 0610 — overlap type; General GSS operating environment. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS should be used under the temperature of -20℃～80℃, and humidity of less than 80%RH. Operating speed selection Consult KGG for critical speed and permissible axial load Manufacturer specification Configuration: GSS 0610 — overlap type; No numerical maximum speed is published for these rows; machine-specific selection is required. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS has the maximum limit of speed and Axial load depending on its size, material, mounting method etc. Operating temperature -20 to 80 °C Manufacturer specification Configuration: GSS 0610 — overlap type; General GSS recommended operating environment; consult KGG beyond these limits. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS should be used under the temperature of -20℃～80℃, and humidity of less than 80%RH. Optional hollow bore diameter 2 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Optional hollow bore, not standard; availability depends on shaft length. It supports suction/blow functions when supplied. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Shaft inertia per unit length 0.000000000999 kg·m²/mm Manufacturer specification Configuration: GSS 0610 — overlap type; Literal catalogue unit Kgm²/mm; value is per shaft length, not complete assembly inertia. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Shaft nominal diameter 6 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Native overlap-type table, printed pages11–12. Dimension unit is explicitly millimetres; nut masses are separate components, not complete assembly mass. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance GSS 0610 \| 6 \| 10 \| (650) \| (900) \| 2 \| 20 \| 14 \| 27 \| 23 \| 11.5 \| 4 \| 16 \| 21 \| 3.4 \| (750) \| (1200) \| (1.9) \| (1.3) \| (2.4) \| 14 \| 12 \| 27 \| 1.5 \| 1.2 \| 2 \| 9.99×10⁻¹⁰ Shaft total radial runout 25 μm Manufacturer specification Configuration: GSS 0610 — C3; total shaft length ≤125 mm; General accuracy table; applies only when selected shaft length is in this bracket. Nominal model does not determine ordered shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-3 \| Unit(单位):μm \| Shaft total length (mm) \| Over — Up to125 \| C3 25 C5 35 Shaft total radial runout 35 μm Manufacturer specification Configuration: GSS 0610 — C3; total shaft length >125 to200 mm; General accuracy table; applies only when selected shaft length is in this bracket. Nominal model does not determine ordered shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-3 \| Unit(单位):μm \| Shaft total length (mm) \| Over125 Up to200 \| C3 35 C5 50 Shaft total radial runout 35 μm Manufacturer specification Configuration: GSS 0610 — C5; total shaft length ≤125 mm; General accuracy table; applies only when selected shaft length is in this bracket. Nominal model does not determine ordered shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-3 \| Unit(单位):μm \| Shaft total length (mm) \| Over — Up to125 \| C3 25 C5 35 Shaft total radial runout 50 μm Manufacturer specification Configuration: GSS 0610 — C5; total shaft length >125 to200 mm; General accuracy table; applies only when selected shaft length is in this bracket. Nominal model does not determine ordered shaft length. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-3 \| Unit(单位):μm \| Shaft total length (mm) \| Over125 Up to200 \| C3 35 C5 50 Standard shaft length limit 150 mm Manufacturer specification Configuration: GSS 0610 — overlap type; Catalogue overlap-table note; consult KGG beyond this limit. GSS0610 detailed drawing elsewhere shows a 230 axial-span callout with unresolved example/configuration applicability; it is not silently substituted as the standard limit. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Maximum limit of Shaft length is 150mm for f6 , 200mm for f8 . Storage humidity <80 %RH Manufacturer specification Configuration: GSS 0610 — overlap type; No dew condensation. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Please store GSS under -20℃～80℃, less than 80%RH humidity without any dew condensation. Storage temperature -20 to 80 °C Manufacturer specification Configuration: GSS 0610 — overlap type; Store unopened in original packaging, without condensation. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Please store GSS under -20℃～80℃, less than 80%RH humidity without any dew condensation. Surface hardness 58–62 HRC Manufacturer specification Configuration: GSS 0610 — standard hollow shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Hollow Shaft \| SUJ2 \| Induction hardening \| HRC 58-62 Surface hardness 58–62 HRC Manufacturer specification Configuration: GSS 0610 — standard nut; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Nut \| SCM415 \| Carburizing and quenching \| HRC 58-62 Surface hardness 58–62 HRC Manufacturer specification Configuration: GSS 0610 — standard solid shaft; Standard GSS material/heat-treatment table; manufacturer says values vary with shaft/nut profile and final KGG drawings govern. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Screw Shaft \| Solid Shaft \| SCM415 \| Carburizing and quenching \| HRC 58-62 Travel variation limit vu 8 μm Manufacturer specification Configuration: GSS 0610 — C3; effective screw length ≤100 mm; Travel variation over effective screw length, not per-revolution accuracy. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over — Up to100 \| C3 ±ep8 Vu8 \| C5 ±ep18 Vu18 Travel variation limit vu 8 μm Manufacturer specification Configuration: GSS 0610 — C3; effective screw length >100 to200 mm; Travel variation over effective screw length, not per-revolution accuracy. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over100 Up to200 \| C3 ±ep10 Vu8 \| C5 ±ep20 Vu18 Travel variation limit vu 18 μm Manufacturer specification Configuration: GSS 0610 — C5; effective screw length ≤100 mm; Travel variation over effective screw length, not per-revolution accuracy. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over — Up to100 \| C3 ±ep8 Vu8 \| C5 ±ep18 Vu18 Travel variation limit vu 18 μm Manufacturer specification Configuration: GSS 0610 — C5; effective screw length >100 to200 mm; Travel variation over effective screw length, not per-revolution accuracy. KGG GSS ball screw with ball spline catalogue — native tables and operating guidance Table F-4 \| Unit(单位):μm \| Effective screw length (mm) \| Over100 Up to200 \| C3 ±ep10 Vu8 \| C5 ±ep20 Vu18

Related products

Looking up through a circular courtyard at modern glass towers and a blue sky.

Build connections across China’s robotics ecosystem.

Share your team background and technical or sourcing goals. We’ll check availability with relevant company representatives and coordinate the next steps.

How it works

How to initiate connections

Define your requirements

Select your target companies and dates, and share your team background and technical or sourcing goals.
We facilitate connections

We identify relevant company representatives, discuss your requirements and check availability.
Confirm your schedule

Review the proposed agenda, arrangements and fees, then confirm your schedule by email.

Connection details

What would you like to achieve through these connections? Tell us what your team is working on and what you hope to achieve. A product, location or target date can help us narrow down the options.

Contact details

Your name Work email

Company / organization Country / region

Company website (optional)

Your request goes to the Robotuo team. Privacy Policy

Robotics is better
in person.

Step inside a working showcase of robotics, from humanoids and helpful machines to the parts that bring them to life.

Book the visit experience Connect with the Robotics' Ecosystem

Visitors gather around a wheeled quadruped robot during a live demonstration at Robot Valley. — A front-row seat to robotics.Inside Robot Valley, Shenzhen

50+exhibiting companies

Hands-onrobot operation & live demos

~1 hourto explore, try, and ask

Sky decka new view of Shenzhen

Inside the showroom

One visit.
A whole world of robotics.

Explore complete machines, real-world applications, and the components behind them. Get a closer look at the variety on display.

A visitor posing beside a compact silver humanoid robot.

Interaction

Meet a humanoid

A first handshake. A playful boxing pose. See how robots move alongside us.

Yellow DEXFORCE robot behind its showroom service counter.

Service robots

Robots at your service

Discover a service robot in a shop-counter setting, with objects it can handle.

ASTRALL quadruped robots on display in Robot Valley.

Robot dogs

Four legs. New possibilities.

Take a closer look at robot dogs and the mechanics that keep them moving.

Close-up of a dexterous robotic hand on a display stand.

Dexterous hands

The detail is in the hands

Explore the dexterous hands that turn movement into precise manipulation.

A visitor standing next to a full-size LimX humanoid robot.

Humanoids

A full-body perspective

Get close to the joints, sensors, and structure of a full-size humanoid.

Blue exhibition booths displaying wearable exoskeletons and compact robots.

Wearable robotics

Technology you can wear

Discover wearable assistance alongside robots built for very different environments.

Automated cooking robot with a stainless-steel wok, ingredient dispensers, and touchscreen controls.

Real-world applications

From the lab to daily life

Explore practical applications, including automated cooking and everyday services.

Robotics components arranged on a showroom demonstration counter.

Core components

What makes a robot work?

Look beyond the body to the components and engineering that make it possible.

A glimpse of what’s inside. Exhibits and live demonstrations may vary by visit.

The blue Robot Valley entrance sculpture inside the real showroom.

More than a display

Watch it move.
Then have a go.

The best questions come when you’re standing right beside a robot. A guided visit brings the hardware, the demonstrations, and the conversation together.

01
Get your bearings
Follow the showroom route and discover how different robots are used.
02
Try robot operation
Get hands-on with selected robots through guided interaction.
03
Keep the conversation going
Ask about the technology, share your interests, and explore what comes next.

Book the visit experience

Beyond the showroom

Step outside.
See the bigger picture.

The sky deck opens onto Shenzhen’s skyline and surrounding mountains. Take in the place where robotics companies, researchers, and makers are building what comes next.

A guide points out the city to visitors on the glass-railed Robot Valley sky deck. — A different perspective on Robot Valley.

An international university group gathers on the timber sky deck with the Shenzhen skyline behind them. — New connections, with a view.

Curiosity brings us together

Come with questions.
Leave with possibilities.

For the simply curious, the people building, and the teams exploring their next idea. Robot Valley is a place to see the technology and talk about where it could go.

Curious visitorsStudents & researchersBuilders & foundersCompany teams

An audience of international visitors listens to a presentation inside Robot Valley. — Ideas are better when they’re shared.

Plan your visit

A little planning.
A lot to discover.

Where: Nanshan, Shenzhen, China
Allow: Approximately one hour
Booking: By appointment

Choose your preferred date and group size on the booking page. The team will confirm the arrangements with you.

What’s included in the visit?

A guided showroom experience with hands-on robot operation and interactive demonstrations. You’ll have time to ask questions and explore the exhibits. Specific robots and activities depend on the day’s arrangements.

Do I need to book in advance?

Yes. Visits are by appointment. Use the booking page to choose your preferred date and share your group details. The team will confirm availability, fees, and arrangements before your visit.

Can I bring a team or student group?

Tell us your group size and interests when booking. Company teams, students, researchers, and other groups can discuss their priorities with the team before the visit.

Can we focus on a particular technology?

Share the robots, applications, or components you’re interested in with your booking request. The team can discuss what’s available and suitable for your visit.

Something else on your mind? info@robotuo.com

Your next encounter with robotics

Come curious.
Leave inspired.

Book the visit experience

Real robots. Real conversations.
See you in Shenzhen.

Visitors posing together at the Robot Valley showroom

About Robotuo

Connecting the world to China’s robotics ecosystem.

Get closer to the people, technology, and opportunities shaping robotics in China.

Connect Visit Robot Valley

Local knowledge / Firsthand insight / Global reach

About us

Build in China.
Reach the world.

We connect global teams with China’s robotics supply chain and the SZ RoboX open-source community to find partners, share expertise, and bring robotics to new markets.

For companies, developers, and entrepreneurs building what comes next in robotics.

Companies in our network: 500+
International visits hosted: 200+
Countries & regions: 30+

A robot drive component on display at Robot Valley

Robotics supply chain

Access robotics, AI hardware, and component suppliers in China. Find partners that fit your business.

A visitor shaking hands with a Robotuo robot during a guided visit

Firsthand partnerships

Understand Chinese businesses, explore technical capabilities, and find opportunities for collaboration.

Developers and entrepreneurs at a MakerMods and SZ RoboX community event

Global Connections, Backed by Experience

With over 1,000 business visitors and buyers served across more than 20 countries and regions, we draw on international experience to connect teams with robotics industry resources.

OUR MISSION

Turn shared knowledge into real-world robotics.

We combine supply chain integration and open-source deployment standards to support robotics applications worldwide.

Connect

For Companies

Bring Open-Source Innovation into Practice

We combine supply chain integration with the development of open-source deployment standards, connecting technology and hardware resources to support robotics applications worldwide.

Robotics sensors and drive components displayed at Robot Valley

For Developers & Entrepreneurs

Find Your Community. Discover New Opportunities.

Join the SZ RoboX open-source robotics community to exchange technical knowledge with developers and entrepreneurs, follow global industry developments, and explore opportunities to innovate and collaborate.

International visitors exchanging ideas around a Robotuo robot demonstration

YOUR PRIVACY

Privacy Policy.

How this website uses information, and the choices you can make.

About this policy

Last updated: 23 September 2026.

Robotuo is responsible for the personal information processed through this website.

This policy covers browsing Robotuo, local preferences, and our planned use of Google Analytics through Firebase and OneSignal web push notifications. These optional services only run when enabled on the site and you have agreed to the relevant category.

Browsing and essential information

You can browse without an account or agreeing to optional services. Our hosting provider receives your IP address, requested URL, browser information, and request time to deliver and protect the site. Our basis for this processing is our legitimate interest in operating a secure, reliable website.

We store your privacy choices in this browser so we can respect them. This essential preference includes the policy version, your choices, and when you made them; it is not sent to an analytics service. Hosting and security logs are separate from these browser settings.

Saved selections and follows

With your consent, “Remember my selections” stores selected and followed companies and products in this browser. These are not synced to an account or shared with Google or OneSignal by our integration. Without consent, these features still work for the current page session.

Turning this option off deletes saved selections from local storage. Current selections remain in memory until you reload or close the page.

Google Analytics through Firebase

With analytics consent, we use the Google Analytics web stream linked to our Firebase project to understand which parts of Robotuo are used and improve the website. Google processes online identifiers, cookie identifiers, browser and device information, general page categories, and usage events. IP addresses are used by Google during collection, including to derive approximate location.

We measure general interactions such as search result counts, category filters, opening details, shortlist changes, Connect request steps and selected external link clicks. These events use fixed labels and count ranges rather than search terms, full query strings, form contents, or individual company and product identifiers. We also measure visits attributed to recognized AI services and confirmed Connect requests from those visits, using a fixed provider label and page category without the original referral URL. Attribution lasts only within the current page session and may be incomplete. We do not send application form contents, names, or email addresses to Analytics. Advertising consent remains off; Google signals and advertising personalization are disabled in our integration.

The Google tag is not loaded before analytics consent. Declining analytics does not enable cookieless analytics pings. Learn more in Google’s Privacy Policy and Firebase’s privacy information.

OneSignal notifications

With notification consent, OneSignal helps us deliver Robotuo news and updates. It processes subscription and device identifiers, push tokens, browser and operating system information, IP address, language, and notification delivery and interaction information. This service may use browser storage and a service worker to deliver notifications even when the website is closed.

Saving consent does not grant browser permission. Open Privacy settings, save your notification choice, then select “Enable notifications” and allow notifications in your browser if prompted. You can withdraw consent here or block notifications in your browser’s site settings.

Withdrawal disables further SDK data collection and attempts to unsubscribe this browser from push messages. It does not automatically erase information already held by OneSignal. See OneSignal’s Privacy Policy.

Cookies, storage, and retention

Our essential robotuo-privacy record is kept in local storage and is valid for 180 days. We ask again when it expires or the consent version changes. Saved selections use robotuo-catalog-follows, robotuo-product-follows, and robotuo-follow-labels; they stay until you withdraw that choice, your consent expires, or you clear site data.

When analytics is enabled with consent, Google uses cookies such as _ga and _ga_*. Our integration limits these cookies to 180 days without automatic renewal. Withdrawing analytics consent disables collection and removes accessible Analytics cookies for this site. Cookie expiry is separate from the retention of data already received by Google.

OneSignal stores subscription information in browser storage and its service worker. Vendor-held records and hosting logs follow the retention settings and obligations applicable to those services; withdrawing consent does not itself delete previously collected records. You can request erasure where applicable.

Your choices and rights

Use “Reject all,” “Accept all,” or individual choices in Privacy settings. Optional categories are off by default. Closing settings or continuing to browse does not give consent. The Privacy settings button is available in the footer throughout the site. Withdrawing consent is as easy as giving it and does not affect the lawfulness of processing before withdrawal.

Where the GDPR or UK GDPR applies, you may request access, correction, erasure, restriction, or portability of your personal information and object to processing based on legitimate interests. You may complain to your local data protection authority. We normally respond to rights requests within one month, subject to applicable extensions and identity verification.

Privacy contact details will be published before optional services are activated.

Clearing browser data resets these choices. To stop push notifications, also disable notification permission in your browser; clearing site data alone may not withdraw permission. Choices apply to this browser, not every device you use.

Service providers and international processing

Our hosting provider, Google, OneSignal, and the browser’s push delivery provider may process technical information needed for their respective services. Processing may take place outside your country, including in the United States. Where required, transfers need appropriate safeguards, such as applicable adequacy decisions or standard contractual clauses. You may request information about safeguards that apply to your data.

Saved selections, analytics, and notification processing rely on your consent. We do not sell the information collected through these features or use it for advertising in this integration.

Search, applications, and external websites

Search terms filter content in your browser and may appear in the page URL. Avoid entering sensitive information into search. Application and issue-report drafts stay in this page until you choose Send. Sending shares the information you entered and the relevant page with Robotuo through our hosting provider and Feishu, where our team reviews it and follows up. Do not include sensitive personal information. These submissions work independently of optional analytics and notification preferences.

To limit repeated requests, our server processes your IP address and stores a keyed hash with short-lived counters. When deployed with our shared Upstash Redis store, it stores these hashes, submission identifiers and delivery state for up to 24 hours; form contents are not stored there. Application and report records remain in Feishu for team review and follow-up. Contact Robotuo about access or deletion using the contact information in this policy.

Reloading or closing the page clears unsent drafts. Visit previews do not send a booking. Company websites and the Robot Valley booking page are separate websites with their own privacy practices. Review their policies before submitting personal details.

About this product family

Compare variants

Specifications & evidence

Ball screw basic dynamic load ca

Ball screw basic static load coa

Ball screw bolt pitch diameter dp

Ball screw flange mounting holes

Ball screw mounting hole diameter x

Ball screw nut axial face runout

Ball screw nut axial face runout

Ball screw nut bearing mounting

Ball screw nut d

Ball screw nut diameter fit

Ball screw nut flange df

Ball screw nut flange thickness f

Ball screw nut l

Ball screw nut l1

Ball screw nut load restriction

Ball screw nut mass

Ball screw nut radial runout

Ball screw nut radial runout

Ball screw nut type

Ball screw nut w

Ball spline basic dynamic load cr

Ball spline basic dynamic torque ct

Ball spline basic static load cor

Ball spline basic static torque cot

Ball spline dimension t

Ball spline dimension t tolerance

Ball spline nut diameter tolerance

Ball spline nut length ls

Ball spline nut length tolerance

Ball spline nut mass

Ball spline nut mounting

Ball spline nut outside diameter ds

Ball spline nut radial runout

Ball spline permissible moment mo

Ball spline pin-hole diameter b

Ball spline pin-hole tolerance

Dust protection

Heat treatment

Heat treatment

Heat treatment

Lead

Lubricant inspection interval

Lubricant recommendation

Lubrication before operation

Material

Material

Material

Maximum axial play

Maximum-load reference

Maximum radial play

Mean travel error limit

Mean travel error limit

Mean travel error limit

Mean travel error limit

Motion functions

Operating humidity

Operating speed selection

Operating temperature

Optional hollow bore diameter

Shaft inertia per unit length

Shaft nominal diameter

Shaft total radial runout

Shaft total radial runout

Shaft total radial runout

Shaft total radial runout

Standard shaft length limit

Storage humidity

Storage temperature

Surface hardness

Surface hardness

Surface hardness

Travel variation limit vu

Travel variation limit vu

Travel variation limit vu

Travel variation limit vu

Specifications & evidence

Ball screw basic dynamic load ca