Product family

LT-TG2

15 variants · Varies by size, stroke, closing force, opening force, force retention

About this product family

The manufacturer selection table lists the LT-TG2 two-finger parallel grippers with T guides across sizes, A/B stroke configurations where offered, and standard/CFM/OFM force configurations. Consolidate the smaller organizational groups while retaining every exact product and its own specifications.

Compare variants

Values retain their source conditions and claim stage. A missing value means it has not been published in this catalogue.

Variant / model	Air consumption per double stroke	Ingress protection	Mass	Maximum air pressure	Maximum axial force fz	Details & evidence
LT-TG2-64B-OFM	21 cm³Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.33 kgConfiguration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1,100 NConfiguration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 21 cm³ Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 21.0 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.33 kg Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司自重(kg) 0.33 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 1,100 N Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司最大轴向力Fz(N) 1100 Maximum finger length 80 mm Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司手指最大长度(mm) 80 Maximum finger mass 0.35 kg Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司手指最大重量(kg) 0.35 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 180 N Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-64B-OFM - 郑州领航机器人有限公司最小保持力(N) 180 Moment mx 40 N·m Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司力矩Mx(N·m) 40 Moment my 60 N·m Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司力矩My(N·m) 60 Moment mz 140 N·m Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司力矩Mz(N·m) 140 Opening / closing time 0.02/0.04 s Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司开/合时间(s) 0.02/0.04 Opening force 835 N Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司张开力(N) 835 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030006 LT-TG2-64B-OFM 3.00 / 835 180 2.95 5℃~90℃ 查看详情>> Order code F11030006 Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030006 LT-TG2-64B-OFM 3.00 / 835 180 2.95 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 2.95 kg Manufacturer specification Configuration: LT-TG2-64B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-64B-OFM - 郑州领航机器人有限公司建议工件重量（kg)① 2.95 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 3 mm Manufacturer specification Configuration: LT-TG2-64B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-OFM - 郑州领航机器人有限公司单指行程(mm) 3
LT-TG2-64B-CFM	17 cm³Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.34 kgConfiguration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1,100 NConfiguration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 17 cm³ Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 17.0 Closing force 770 N Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司闭合力(N) 770 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.34 kg Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司自重(kg) 0.34 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 1,100 N Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司最大轴向力Fz(N) 1100 Maximum finger length 80 mm Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司手指最大长度(mm) 80 Maximum finger mass 0.35 kg Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司手指最大重量(kg) 0.35 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 180 N Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-64B-CFM - 郑州领航机器人有限公司最小保持力(N) 180 Moment mx 40 N·m Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司力矩Mx(N·m) 40 Moment my 60 N·m Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司力矩My(N·m) 60 Moment mz 40 N·m Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司力矩Mz(N·m) 40 Opening / closing time 0.04/0.02 s Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司开/合时间(s) 0.04/0.02 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030005 LT-TG2-64B-CFM 3.00 770 / 180 2.95 5℃~90℃ 查看详情>> Order code F11030005 Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030005 LT-TG2-64B-CFM 3.00 770 / 180 2.95 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 2.95 kg Manufacturer specification Configuration: LT-TG2-64B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-64B-CFM - 郑州领航机器人有限公司建议工件重量（kg)① 2.95 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 3 mm Manufacturer specification Configuration: LT-TG2-64B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B-CFM - 郑州领航机器人有限公司单指行程(mm) 3
LT-TG2-64B	10 cm³Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.27 kgConfiguration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified.	1,100 NConfiguration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 10 cm³ Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司耗气量(cm3)(双程) 10.0 Closing force 590 N Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司闭合力(N) 590 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.27 kg Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司自重(kg) 0.27 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 1,100 N Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司最大轴向力Fz(N) 1100 Maximum finger length 85 mm Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司手指最大长度(mm) 85 Maximum finger mass 0.35 kg Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司手指最大重量(kg) 0.35 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 40 N·m Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司力矩Mx(N·m) 40 Moment my 60 N·m Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司力矩My(N·m) 60 Moment mz 40 N·m Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司力矩Mz(N·m) 40 Opening / closing time 0.03/0.03 s Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司开/合时间(s) 0.03/0.03 Opening force 655 N Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司张开力(N) 655 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030004 LT-TG2-64B 3.00 590 655 / 2.95 5℃~90℃ 查看详情>> Order code F11030004 Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030004 LT-TG2-64B 3.00 590 655 / 2.95 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 2.95 kg Manufacturer specification Configuration: LT-TG2-64B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-64B - 郑州领航机器人有限公司建议工件重量（kg)① 2.95 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 3 mm Manufacturer specification Configuration: LT-TG2-64B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64B - 郑州领航机器人有限公司单指行程(mm) 3
LT-TG2-64A-OFM	21 cm³Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.33 kgConfiguration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1,100 NConfiguration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 21 cm³ Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 21.0 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.33 kg Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司自重(kg) 0.33 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 1,100 N Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司最大轴向力Fz(N) 1100 Maximum finger length 85 mm Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司手指最大长度(mm) 85 Maximum finger mass 0.35 kg Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司手指最大重量(kg) 0.35 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 87 N Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-64A-OFM - 郑州领航机器人有限公司最小保持力(N) 87 Moment mx 40 N·m Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司力矩Mx(N·m) 40 Moment my 60 N·m Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司力矩My(N·m) 60 Moment mz 40 N·m Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司力矩Mz(N·m) 40 Opening / closing time 0.02/0.04 s Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司开/合时间(s) 0.02/0.04 Opening force 414 N Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司张开力(N) 414 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030003 LT-TG2-64A-OFM 6.00 / 414 87 1.45 5℃~90℃ 查看详情>> Order code F11030003 Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030003 LT-TG2-64A-OFM 6.00 / 414 87 1.45 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 1.45 kg Manufacturer specification Configuration: LT-TG2-64A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-64A-OFM - 郑州领航机器人有限公司建议工件重量（kg)① 1.45 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 6 mm Manufacturer specification Configuration: LT-TG2-64A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-OFM - 郑州领航机器人有限公司单指行程(mm) 6
LT-TG2-64A-CFM	17 cm³Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.34 kgConfiguration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	1,100 NConfiguration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 17 cm³ Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 17.0 Closing force 382 N Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司闭合力(N) 382 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.34 kg Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司自重(kg) 0.34 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 1,100 N Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司最大轴向力Fz(N) 1100 Maximum finger length 85 mm Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司手指最大长度(mm) 85 Maximum finger mass 0.35 kg Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司手指最大重量(kg) 0.35 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 87 N Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-64A-CFM - 郑州领航机器人有限公司最小保持力(N) 87 Moment mx 40 N·m Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司力矩Mx(N·m) 40 Moment my 60 N·m Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司力矩My(N·m) 60 Moment mz 40 N·m Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司力矩Mz(N·m) 40 Opening / closing time 0.04/0.02 s Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司开/合时间(s) 0.04/0.02 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030002 LT-TG2-64A-CFM 6.00 382 / 87 1.45 5℃~90℃ 查看详情>> Order code F11030002 Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030002 LT-TG2-64A-CFM 6.00 382 / 87 1.45 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 1.45 kg Manufacturer specification Configuration: LT-TG2-64A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-64A-CFM - 郑州领航机器人有限公司建议工件重量（kg)① 1.45 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 6 mm Manufacturer specification Configuration: LT-TG2-64A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A-CFM - 郑州领航机器人有限公司单指行程(mm) 6
LT-TG2-64A	10 cm³Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.27 kgConfiguration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.	1,100 NConfiguration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 10 cm³ Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司耗气量(cm3)(双程) 10.0 Closing force 295 N Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司闭合力(N) 295 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.27 kg Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司自重(kg) 0.27 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 1,100 N Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司最大轴向力Fz(N) 1100 Maximum finger length 90 mm Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司手指最大长度(mm) 90 Maximum finger mass 0.35 kg Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司手指最大重量(kg) 0.35 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 40 N·m Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司力矩Mx(N·m) 40 Moment my 60 N·m Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司力矩My(N·m) 60 Moment mz 40 N·m Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司力矩Mz(N·m) 40 Opening / closing time 0.03/0.03 s Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司开/合时间(s) 0.03/0.03 Opening force 327 N Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司张开力(N) 327 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030001 LT-TG2-64A 6.00 295 327 / 1.45 5℃~90℃ 查看详情>> Order code F11030001 Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11030001 LT-TG2-64A 6.00 295 327 / 1.45 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 1.45 kg Manufacturer specification Configuration: LT-TG2-64A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-64A - 郑州领航机器人有限公司建议工件重量（kg)① 1.45 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 6 mm Manufacturer specification Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-64A - 郑州领航机器人有限公司单指行程(mm) 6
LT-TG2-50B-OFM	11 cm³Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.2 kgConfiguration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	500 NConfiguration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 11 cm³ Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 11.0 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.2 kg Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司自重(kg) 0.2 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 500 N Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司最大轴向力Fz(N) 500 Maximum finger length 64 mm Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司手指最大长度(mm) 64 Maximum finger mass 0.18 kg Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司手指最大重量(kg) 0.18 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 145 N Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-50B-OFM - 郑州领航机器人有限公司最小保持力(N) 145 Moment mx 20 N·m Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司力矩Mx(N·m) 20 Moment my 25 N·m Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司力矩My(N·m) 25 Moment mz 10 N·m Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司力矩Mz(N·m) 10 Opening / closing time 0.02/0.03 s Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司开/合时间(s) 0.02/0.03 Opening force 575 N Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司张开力(N) 575 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020008 LT-TG2-50B-OFM 2.00 / 575 145 1.90 5℃~90℃ 查看详情>> Order code F11020008 Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020008 LT-TG2-50B-OFM 2.00 / 575 145 1.90 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 1.9 kg Manufacturer specification Configuration: LT-TG2-50B-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-50B-OFM - 郑州领航机器人有限公司建议工件重量（kg)① 1.9 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 2 mm Manufacturer specification Configuration: LT-TG2-50B-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-OFM - 郑州领航机器人有限公司单指行程(mm) 2
LT-TG2-50B-CFM	5 cm³Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.2 kgConfiguration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	500 NConfiguration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 5 cm³ Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 5.0 Closing force 533 N Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司闭合力(N) 533 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.2 kg Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司自重(kg) 0.2 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 500 N Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司最大轴向力Fz(N) 500 Maximum finger length 68 mm Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司手指最大长度(mm) 68 Maximum finger mass 0.18 kg Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司手指最大重量(kg) 0.18 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 145 N Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-50B-CFM - 郑州领航机器人有限公司最小保持力(N) 145 Moment mx 20 N·m Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司力矩Mx(N·m) 20 Moment my 25 N·m Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司力矩My(N·m) 25 Moment mz 10 N·m Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司力矩Mz(N·m) 10 Opening / closing time 0.03/0.02 s Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司开/合时间(s) 0.03/0.02 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020007 LT-TG2-50B-CFM 2.00 533 / 145 1.90 5℃~90℃ 查看详情>> Order code F11020007 Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020007 LT-TG2-50B-CFM 2.00 533 / 145 1.90 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 1.9 kg Manufacturer specification Configuration: LT-TG2-50B-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-50B-CFM - 郑州领航机器人有限公司建议工件重量（kg)① 1.9 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 2 mm Manufacturer specification Configuration: LT-TG2-50B-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B-CFM - 郑州领航机器人有限公司单指行程(mm) 2
LT-TG2-50B	5 cm³Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.17 kgConfiguration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified.	500 NConfiguration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 5 cm³ Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司耗气量(cm3)(双程) 5.0 Closing force 388 N Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司闭合力(N) 388 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.17 kg Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司自重(kg) 0.17 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 500 N Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司最大轴向力Fz(N) 500 Maximum finger length 68 mm Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司手指最大长度(mm) 68 Maximum finger mass 0.18 kg Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司手指最大重量(kg) 0.18 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 20 N·m Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司力矩Mx(N·m) 20 Moment my 25 N·m Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司力矩My(N·m) 25 Moment mz 10 N·m Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司力矩Mz(N·m) 10 Opening / closing time 0.02/0.02 s Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司开/合时间(s) 0.02/0.02 Opening force 430 N Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司张开力(N) 430 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020006 LT-TG2-50B 2.00 388 430 / 1.90 5℃~90℃ 查看详情>> Order code F11020006 Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020006 LT-TG2-50B 2.00 388 430 / 1.90 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 1.9 kg Manufacturer specification Configuration: LT-TG2-50B; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-50B - 郑州领航机器人有限公司建议工件重量（kg)① 1.9 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 2 mm Manufacturer specification Configuration: LT-TG2-50B; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50B - 郑州领航机器人有限公司单指行程(mm) 2
LT-TG2-50A-OFM	8.5 cm³Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.2 kgConfiguration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	500 NConfiguration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 8.5 cm³ Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 8.5 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.2 kg Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司自重(kg) 0.2 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 500 N Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司最大轴向力Fz(N) 500 Maximum finger length 68 mm Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司手指最大长度(mm) 68 Maximum finger mass 0.18 kg Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司手指最大重量(kg) 0.18 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 70 N Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-50A-OFM - 郑州领航机器人有限公司最小保持力(N) 70 Moment mx 20 N·m Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司力矩Mx(N·m) 20 Moment my 25 N·m Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司力矩My(N·m) 25 Moment mz 10 N·m Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司力矩Mz(N·m) 10 Opening / closing time 0.02/0.03 s Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司开/合时间(s) 0.02/0.03 Opening force 285 N Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司张开力(N) 285 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020003 LT-TG2-50A-OFM 4.00 / 285 70 0.95 5℃~90℃ 查看详情>> Order code F11020003 Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020003 LT-TG2-50A-OFM 4.00 / 285 70 0.95 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 0.95 kg Manufacturer specification Configuration: LT-TG2-50A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-50A-OFM - 郑州领航机器人有限公司建议工件重量（kg)① 0.95 Repeatability 0.02 mm Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司重复精度(mm) 0.02 Single-finger stroke 4 mm Manufacturer specification Configuration: LT-TG2-50A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-OFM - 郑州领航机器人有限公司单指行程(mm) 4
LT-TG2-50A-CFM	8.5 cm³Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.2 kgConfiguration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	500 NConfiguration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 8.5 cm³ Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 8.5 Closing force 262 N Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司闭合力(N) 262 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.2 kg Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司自重(kg) 0.2 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 500 N Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司最大轴向力Fz(N) 500 Maximum finger length 68 mm Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司手指最大长度(mm) 68 Maximum finger mass 0.18 kg Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司手指最大重量(kg) 0.18 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 70 N Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-50A-CFM - 郑州领航机器人有限公司最小保持力(N) 70 Moment mx 20 N·m Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司力矩Mx(N·m) 20 Moment my 25 N·m Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司力矩My(N·m) 25 Moment mz 10 N·m Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司力矩Mz(N·m) 10 Opening / closing time 0.03/0.02 s Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司开/合时间(s) 0.03/0.02 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020002 LT-TG2-50A-CFM 4.00 262 / 70 0.95 5℃~90℃ 查看详情>> Order code F11020002 Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020002 LT-TG2-50A-CFM 4.00 262 / 70 0.95 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 0.95 kg Manufacturer specification Configuration: LT-TG2-50A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-50A-CFM - 郑州领航机器人有限公司建议工件重量（kg)① 0.95 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 4 mm Manufacturer specification Configuration: LT-TG2-50A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A-CFM - 郑州领航机器人有限公司单指行程(mm) 4
LT-TG2-50A	5 cm³Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.17 kgConfiguration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified.	500 NConfiguration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 5 cm³ Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司耗气量(cm3)(双程) 5.0 Closing force 192 N Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司闭合力(N) 192 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.17 kg Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司自重(kg) 0.17 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 500 N Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司最大轴向力Fz(N) 500 Maximum finger length 72 mm Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司手指最大长度(mm) 72 Maximum finger mass 0.18 kg Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司手指最大重量(kg) 0.18 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 20 N·m Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司力矩Mx(N·m) 20 Moment my 25 N·m Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司力矩My(N·m) 25 Moment mz 10 N·m Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司力矩Mz(N·m) 10 Opening / closing time 0.02/0.02 s Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司开/合时间(s) 0.02/0.02 Opening force 215 N Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司张开力(N) 215 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020001 LT-TG2-50A 4.00 192 215 / 0.95 5℃~90℃ 查看详情>> Order code F11020001 Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11020001 LT-TG2-50A 4.00 192 215 / 0.95 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 0.95 kg Manufacturer specification Configuration: LT-TG2-50A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-50A - 郑州领航机器人有限公司建议工件重量（kg)① 0.95 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 4 mm Manufacturer specification Configuration: LT-TG2-50A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-50A - 郑州领航机器人有限公司单指行程(mm) 4
LT-TG2-40A-OFM	4.5 cm³Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.1 kgConfiguration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	250 NConfiguration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 4.5 cm³ Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 4.5 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.1 kg Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司自重(kg) 0.1 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 250 N Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司最大轴向力Fz(N) 250 Maximum finger length 54 mm Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司手指最大长度(mm) 54 Maximum finger mass 0.1 kg Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司手指最大重量(kg) 0.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 57 N Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-40A-OFM - 郑州领航机器人有限公司最小保持力(N) 57 Moment mx 10 N·m Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司力矩Mx(N·m) 10 Moment my 12 N·m Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司力矩My(N·m) 12 Moment mz 5 N·m Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司力矩Mz(N·m) 5 Opening / closing time 0.02/0.03 s Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司开/合时间(s) 0.02/0.03 Opening force 224 N Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司张开力(N) 224 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11010003 LT-TG2-40A-OFM 2.50 / 224 57 0.76 5℃~90℃ 查看详情>> Order code F11010003 Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11010003 LT-TG2-40A-OFM 2.50 / 224 57 0.76 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 0.76 kg Manufacturer specification Configuration: LT-TG2-40A-OFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-40A-OFM - 郑州领航机器人有限公司建议工件重量（kg)① 0.76 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 2.5 mm Manufacturer specification Configuration: LT-TG2-40A-OFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-OFM - 郑州领航机器人有限公司单指行程(mm) 2.5
LT-TG2-40A-CFM	2.5 cm³Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.1 kgConfiguration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	0.65 MPaConfiguration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	250 NConfiguration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 2.5 cm³ Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司耗气量(cm3)(双程) 2.5 Closing force 210 N Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司闭合力(N) 210 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.1 kg Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司自重(kg) 0.1 Maximum air pressure 0.65 MPa Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司最大气压(Mpa) 0.65 Maximum axial force fz 250 N Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司最大轴向力Fz(N) 250 Maximum finger length 58 mm Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司手指最大长度(mm) 58 Maximum finger mass 0.1 kg Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司手指最大重量(kg) 0.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Minimum holding force 57 N Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer warns the force-enhanced gripper alone does not establish a force-retention system; retaining pressure with additional equipment such as a pressure-holding valve is required where force holding is needed. LT-TG2-40A-CFM - 郑州领航机器人有限公司最小保持力(N) 57 Moment mx 10 N·m Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司力矩Mx(N·m) 10 Moment my 12 N·m Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司力矩My(N·m) 12 Moment mz 5 N·m Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司力矩Mz(N·m) 5 Opening / closing time 0.03/0.02 s Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司开/合时间(s) 0.03/0.02 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11010002 LT-TG2-40A-CFM 2.50 210 / 57 0.76 5℃~90℃ 查看详情>> Order code F11010002 Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11010002 LT-TG2-40A-CFM 2.50 210 / 57 0.76 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 0.76 kg Manufacturer specification Configuration: LT-TG2-40A-CFM; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-40A-CFM - 郑州领航机器人有限公司建议工件重量（kg)① 0.76 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 2.5 mm Manufacturer specification Configuration: LT-TG2-40A-CFM; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A-CFM - 郑州领航机器人有限公司单指行程(mm) 2.5
LT-TG2-40A	2.5 cm³Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified.	IP40Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.08 kgConfiguration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified.	0.8 MPaConfiguration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified.	250 NConfiguration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified.	Full specifications Source-backed claims Specifications & evidence Source-backed claims. Configuration, workload and evidence type matter when comparing products. Air consumption per double stroke 2.5 cm³ Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司耗气量(cm3)(双程) 2.5 Closing force 153 N Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司闭合力(N) 153 Ingress protection IP40 Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司防护等级（IP） IP40 Mass 0.08 kg Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司自重(kg) 0.08 Maximum air pressure 0.8 MPa Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司最大气压(Mpa) 0.8 Maximum axial force fz 250 N Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司最大轴向力Fz(N) 250 Maximum finger length 58 mm Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司手指最大长度(mm) 58 Maximum finger mass 0.1 kg Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司手指最大重量(kg) 0.1 Minimum air pressure 0.4 MPa Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司最小气压(Mpa) 0.4 Moment mx 10 N·m Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司力矩Mx(N·m) 10 Moment my 12 N·m Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司力矩My(N·m) 12 Moment mz 5 N·m Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司力矩Mz(N·m) 5 Opening / closing time 0.02/0.02 s Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司开/合时间(s) 0.02/0.02 Opening force 167 N Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司张开力(N) 167 Operating temperature 5℃~90℃ °C Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11010001 LT-TG2-40A 2.50 153 167 / 0.76 5℃~90℃ 查看详情>> Order code F11010001 Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. 2指抓手 - 郑州领航机器人有限公司 F11010001 LT-TG2-40A 2.50 153 167 / 0.76 5℃~90℃ 查看详情>> Rated air pressure 0.6 MPa Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司额定气压(Mpa) 0.6 Recommended workpiece mass 0.76 kg Manufacturer specification Configuration: LT-TG2-40A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating. LT-TG2-40A - 郑州领航机器人有限公司建议工件重量（kg)① 0.76 Repeatability 0.01 mm Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司重复精度(mm) 0.01 Single-finger stroke 2.5 mm Manufacturer specification Configuration: LT-TG2-40A; Manufacturer specification for this exact model; additional test conditions are not specified. LT-TG2-40A - 郑州领航机器人有限公司单指行程(mm) 2.5

Related products

Looking up through a circular courtyard at modern glass towers and a blue sky.

Build connections across China’s robotics ecosystem.

Share your team background and technical or sourcing goals. We’ll check availability with relevant company representatives and coordinate the next steps.

How it works

How to initiate connections

Define your requirements

Select your target companies and dates, and share your team background and technical or sourcing goals.
We facilitate connections

We identify relevant company representatives, discuss your requirements and check availability.
Confirm your schedule

Review the proposed agenda, arrangements and fees, then confirm your schedule by email.

Connection details

What would you like to achieve through these connections? Tell us what your team is working on and what you hope to achieve. A product, location or target date can help us narrow down the options.

Contact details

Your name Work email

Company / organization Country / region

Company website (optional)

Your request goes to the Robotuo team. Privacy Policy

Robotics is better
in person.

Step inside a working showcase of robotics, from humanoids and helpful machines to the parts that bring them to life.

Book the visit experience Connect with the Robotics' Ecosystem

Visitors gather around a wheeled quadruped robot during a live demonstration at Robot Valley. — A front-row seat to robotics.Inside Robot Valley, Shenzhen

50+exhibiting companies

Hands-onrobot operation & live demos

~1 hourto explore, try, and ask

Sky decka new view of Shenzhen

Inside the showroom

One visit.
A whole world of robotics.

Explore complete machines, real-world applications, and the components behind them. Get a closer look at the variety on display.

A visitor posing beside a compact silver humanoid robot.

Interaction

Meet a humanoid

A first handshake. A playful boxing pose. See how robots move alongside us.

Yellow DEXFORCE robot behind its showroom service counter.

Service robots

Robots at your service

Discover a service robot in a shop-counter setting, with objects it can handle.

ASTRALL quadruped robots on display in Robot Valley.

Robot dogs

Four legs. New possibilities.

Take a closer look at robot dogs and the mechanics that keep them moving.

Close-up of a dexterous robotic hand on a display stand.

Dexterous hands

The detail is in the hands

Explore the dexterous hands that turn movement into precise manipulation.

A visitor standing next to a full-size LimX humanoid robot.

Humanoids

A full-body perspective

Get close to the joints, sensors, and structure of a full-size humanoid.

Blue exhibition booths displaying wearable exoskeletons and compact robots.

Wearable robotics

Technology you can wear

Discover wearable assistance alongside robots built for very different environments.

Automated cooking robot with a stainless-steel wok, ingredient dispensers, and touchscreen controls.

Real-world applications

From the lab to daily life

Explore practical applications, including automated cooking and everyday services.

Robotics components arranged on a showroom demonstration counter.

Core components

What makes a robot work?

Look beyond the body to the components and engineering that make it possible.

A glimpse of what’s inside. Exhibits and live demonstrations may vary by visit.

The blue Robot Valley entrance sculpture inside the real showroom.

More than a display

Watch it move.
Then have a go.

The best questions come when you’re standing right beside a robot. A guided visit brings the hardware, the demonstrations, and the conversation together.

01
Get your bearings
Follow the showroom route and discover how different robots are used.
02
Try robot operation
Get hands-on with selected robots through guided interaction.
03
Keep the conversation going
Ask about the technology, share your interests, and explore what comes next.

Book the visit experience

Beyond the showroom

Step outside.
See the bigger picture.

The sky deck opens onto Shenzhen’s skyline and surrounding mountains. Take in the place where robotics companies, researchers, and makers are building what comes next.

A guide points out the city to visitors on the glass-railed Robot Valley sky deck. — A different perspective on Robot Valley.

An international university group gathers on the timber sky deck with the Shenzhen skyline behind them. — New connections, with a view.

Curiosity brings us together

Come with questions.
Leave with possibilities.

For the simply curious, the people building, and the teams exploring their next idea. Robot Valley is a place to see the technology and talk about where it could go.

Curious visitorsStudents & researchersBuilders & foundersCompany teams

An audience of international visitors listens to a presentation inside Robot Valley. — Ideas are better when they’re shared.

Plan your visit

A little planning.
A lot to discover.

Where: Nanshan, Shenzhen, China
Allow: Approximately one hour
Booking: By appointment

Choose your preferred date and group size on the booking page. The team will confirm the arrangements with you.

What’s included in the visit?

A guided showroom experience with hands-on robot operation and interactive demonstrations. You’ll have time to ask questions and explore the exhibits. Specific robots and activities depend on the day’s arrangements.

Do I need to book in advance?

Yes. Visits are by appointment. Use the booking page to choose your preferred date and share your group details. The team will confirm availability, fees, and arrangements before your visit.

Can I bring a team or student group?

Tell us your group size and interests when booking. Company teams, students, researchers, and other groups can discuss their priorities with the team before the visit.

Can we focus on a particular technology?

Share the robots, applications, or components you’re interested in with your booking request. The team can discuss what’s available and suitable for your visit.

Something else on your mind? info@robotuo.com

Your next encounter with robotics

Come curious.
Leave inspired.

Book the visit experience

Real robots. Real conversations.
See you in Shenzhen.

Visitors posing together at the Robot Valley showroom

About Robotuo

Connecting the world to China’s robotics ecosystem.

Get closer to the people, technology, and opportunities shaping robotics in China.

Connect Visit Robot Valley

Local knowledge / Firsthand insight / Global reach

About us

Build in China.
Reach the world.

We connect global teams with China’s robotics supply chain and the SZ RoboX open-source community to find partners, share expertise, and bring robotics to new markets.

For companies, developers, and entrepreneurs building what comes next in robotics.

Companies in our network: 500+
International visits hosted: 200+
Countries & regions: 30+

A robot drive component on display at Robot Valley

Robotics supply chain

Access robotics, AI hardware, and component suppliers in China. Find partners that fit your business.

A visitor shaking hands with a Robotuo robot during a guided visit

Firsthand partnerships

Understand Chinese businesses, explore technical capabilities, and find opportunities for collaboration.

Developers and entrepreneurs at a MakerMods and SZ RoboX community event

Global Connections, Backed by Experience

With over 1,000 business visitors and buyers served across more than 20 countries and regions, we draw on international experience to connect teams with robotics industry resources.

OUR MISSION

Turn shared knowledge into real-world robotics.

We combine supply chain integration and open-source deployment standards to support robotics applications worldwide.

Connect

For Companies

Bring Open-Source Innovation into Practice

We combine supply chain integration with the development of open-source deployment standards, connecting technology and hardware resources to support robotics applications worldwide.

Robotics sensors and drive components displayed at Robot Valley

For Developers & Entrepreneurs

Find Your Community. Discover New Opportunities.

Join the SZ RoboX open-source robotics community to exchange technical knowledge with developers and entrepreneurs, follow global industry developments, and explore opportunities to innovate and collaborate.

International visitors exchanging ideas around a Robotuo robot demonstration

YOUR PRIVACY

Privacy Policy.

How this website uses information, and the choices you can make.

About this policy

Last updated: 23 September 2026.

Robotuo is responsible for the personal information processed through this website.

This policy covers browsing Robotuo, local preferences, and our planned use of Google Analytics through Firebase and OneSignal web push notifications. These optional services only run when enabled on the site and you have agreed to the relevant category.

Browsing and essential information

You can browse without an account or agreeing to optional services. Our hosting provider receives your IP address, requested URL, browser information, and request time to deliver and protect the site. Our basis for this processing is our legitimate interest in operating a secure, reliable website.

We store your privacy choices in this browser so we can respect them. This essential preference includes the policy version, your choices, and when you made them; it is not sent to an analytics service. Hosting and security logs are separate from these browser settings.

Saved comparisons and follows

With your consent, “Remember my selections” stores comparisons and followed companies and products in this browser. These are not synced to an account or shared with Google or OneSignal by our integration. Without consent, these features still work for the current page session.

Turning this option off deletes saved selections from local storage. Current selections remain in memory until you reload or close the page.

Google Analytics through Firebase

With analytics consent, we use the Google Analytics web stream linked to our Firebase project to understand which parts of Robotuo are used and improve the website. Google processes online identifiers, cookie identifiers, browser and device information, general page categories, and usage events. IP addresses are used by Google during collection, including to derive approximate location.

Our integration uses general page categories rather than search terms, full query strings, or individual company and product identifiers. With analytics consent, we also measure visits attributed to recognized AI services and confirmed Connect requests from those visits. We send a fixed provider label and page category, without sending the original referral URL or form contents. Attribution lasts only within the current page session and may be incomplete. We do not send application form contents, names, or email addresses to Analytics. Advertising consent remains off; Google signals and advertising personalization are disabled in our integration.

The Google tag is not loaded before analytics consent. Declining analytics does not enable cookieless analytics pings. Learn more in Google’s Privacy Policy and Firebase’s privacy information.

OneSignal notifications

With notification consent, OneSignal helps us deliver Robotuo news and updates. It processes subscription and device identifiers, push tokens, browser and operating system information, IP address, language, and notification delivery and interaction information. This service may use browser storage and a service worker to deliver notifications even when the website is closed.

Saving consent does not grant browser permission. Open Privacy settings, save your notification choice, then select “Enable notifications” and allow notifications in your browser if prompted. You can withdraw consent here or block notifications in your browser’s site settings.

Withdrawal disables further SDK data collection and attempts to unsubscribe this browser from push messages. It does not automatically erase information already held by OneSignal. See OneSignal’s Privacy Policy.

Cookies, storage, and retention

Our essential robotuo-privacy record is kept in local storage and is valid for 180 days. We ask again when it expires or the consent version changes. Saved selections use robotuo-compare, robotuo-catalog-follows, robotuo-product-follows, and robotuo-follow-labels; they stay until you withdraw that choice, your consent expires, or you clear site data.

When analytics is enabled with consent, Google uses cookies such as _ga and _ga_*. Our integration limits these cookies to 180 days without automatic renewal. Withdrawing analytics consent disables collection and removes accessible Analytics cookies for this site. Cookie expiry is separate from the retention of data already received by Google.

OneSignal stores subscription information in browser storage and its service worker. Vendor-held records and hosting logs follow the retention settings and obligations applicable to those services; withdrawing consent does not itself delete previously collected records. You can request erasure where applicable.

Your choices and rights

Use “Reject all,” “Accept all,” or individual choices in Privacy settings. Optional categories are off by default. Closing settings or continuing to browse does not give consent. The Privacy settings button is available in the footer throughout the site. Withdrawing consent is as easy as giving it and does not affect the lawfulness of processing before withdrawal.

Where the GDPR or UK GDPR applies, you may request access, correction, erasure, restriction, or portability of your personal information and object to processing based on legitimate interests. You may complain to your local data protection authority. We normally respond to rights requests within one month, subject to applicable extensions and identity verification.

Privacy contact details will be published before optional services are activated.

Clearing browser data resets these choices. To stop push notifications, also disable notification permission in your browser; clearing site data alone may not withdraw permission. Choices apply to this browser, not every device you use.

Service providers and international processing

Our hosting provider, Google, OneSignal, and the browser’s push delivery provider may process technical information needed for their respective services. Processing may take place outside your country, including in the United States. Where required, transfers need appropriate safeguards, such as applicable adequacy decisions or standard contractual clauses. You may request information about safeguards that apply to your data.

Saved selections, analytics, and notification processing rely on your consent. We do not sell the information collected through these features or use it for advertising in this integration.

Search, applications, and external websites

Search terms filter content in your browser and may appear in the page URL. Avoid entering sensitive information into search. Application and issue-report drafts stay in this page until you choose Send. Sending shares the information you entered and the relevant page with Robotuo through our hosting provider and Feishu, where our team reviews it and follows up. Do not include sensitive personal information. These submissions work independently of optional analytics and notification preferences.

To limit repeated requests, our server processes your IP address and stores a keyed hash with short-lived counters. When deployed with our shared Upstash Redis store, it stores these hashes, submission identifiers and delivery state for up to 24 hours; form contents are not stored there. Application and report records remain in Feishu for team review and follow-up. Contact Robotuo about access or deletion using the contact information in this policy.

Reloading or closing the page clears unsent drafts. Visit previews do not send a booking. Company websites and the Robot Valley booking page are separate websites with their own privacy practices. Review their policies before submitting personal details.

About this product family

Compare variants

Specifications & evidence

Air consumption per double stroke

Ingress protection

Mass

Maximum air pressure

Maximum axial force fz

Maximum finger length

Maximum finger mass

Minimum air pressure

Minimum holding force

Moment mx

Moment my

Moment mz

Opening / closing time

Opening force

Operating temperature

Order code

Rated air pressure

Recommended workpiece mass

Repeatability

Single-finger stroke

Specifications & evidence

Air consumption per double stroke

Closing force

Ingress protection

Mass

Maximum air pressure

Maximum axial force fz

Maximum finger length

Maximum finger mass

Minimum air pressure

Minimum holding force

Moment mx

Moment my

Moment mz

Opening / closing time

Operating temperature

Order code

Rated air pressure

Recommended workpiece mass

Repeatability

Single-finger stroke

Specifications & evidence

Air consumption per double stroke

Closing force

Ingress protection

Mass

Maximum air pressure

Maximum axial force fz

Maximum finger length

Maximum finger mass

Minimum air pressure

Moment mx

Moment my

Moment mz

Opening / closing time

Opening force

Operating temperature

Order code

Rated air pressure

Recommended workpiece mass

Repeatability

Single-finger stroke

Specifications & evidence

Air consumption per double stroke

Ingress protection

Mass

Maximum air pressure

Maximum axial force fz

Maximum finger length

Maximum finger mass

Minimum air pressure

Minimum holding force

Moment mx

Moment my

Moment mz

Opening / closing time

Opening force