Product details

LT-TG2-64A

Motion control and actuation

LH-TC

LT-TG2-64A

About this product

A two-finger pneumatic gripper for robotic workpiece handling.

Model
LT-TG2-64A
Category
Motion control and actuation, Components, Grippers & End Effectors

Product family: LT-TG2

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Air consumption per double stroke

10 cm³

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
耗气量(cm3)(双程) 10.0

Closing force

295 N

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
闭合力(N) 295

Ingress protection

IP40

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
防护等级(IP) IP40

Mass

0.27 kg

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
自重(kg) 0.27

Maximum air pressure

0.8 MPa

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
最大气压(Mpa) 0.8

Maximum axial force fz

1,100 N

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
最大轴向力Fz(N) 1100

Maximum finger length

90 mm

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
手指最大长度(mm) 90

Maximum finger mass

0.35 kg

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
手指最大重量(kg) 0.35

Minimum air pressure

0.4 MPa

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
最小气压(Mpa) 0.4

Moment mx

40 N·m

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
力矩Mx(N·m) 40

Moment my

60 N·m

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
力矩My(N·m) 60

Moment mz

40 N·m

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
力矩Mz(N·m) 40

Opening / closing time

0.03/0.03 s

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
开/合时间(s) 0.03/0.03

Opening force

327 N

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
张开力(N) 327

Operating temperature

5℃~90℃ °C

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

2指抓手 - 郑州领航机器人有限公司
F11030001 LT-TG2-64A 6.00 295 327 / 1.45 5℃~90℃ 查看详情>>

Order code

F11030001

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

2指抓手 - 郑州领航机器人有限公司
F11030001 LT-TG2-64A 6.00 295 327 / 1.45 5℃~90℃ 查看详情>>

Rated air pressure

0.6 MPa

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
额定气压(Mpa) 0.6

Recommended workpiece mass

1.45 kg

Manufacturer specification

Configuration: LT-TG2-64A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating.

LT-TG2-64A - 郑州领航机器人有限公司
建议工件重量(kg)① 1.45

Repeatability

0.01 mm

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
重复精度(mm) 0.01

Single-finger stroke

6 mm

Manufacturer specification

Configuration: LT-TG2-64A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-TG2-64A - 郑州领航机器人有限公司
单指行程(mm) 6

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save selected and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.