Source-backed claims. Configuration, workload and evidence type matter when comparing products.
Creep 30 minutes
≤±0.5 %F.S./30 min
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header.
HPS-TSJ053-66 official technical page and embedded mechanical drawing蠕变
(%F.S./30min)
≤±0.5
Drawing angular spacing
45°
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawing45°
Drawing bore diameter
Φ12 H7
+0.018
0
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ12 H7
+0.018
0
Drawing inner drill
Φ3.3 through
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ3.3 完全贯穿
Drawing inner pitch circle
Φ20
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ20
Drawing inner step diameter
Φ26
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ26
Drawing inner threaded holes
8×M4-6H through
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawing8×M4-6H 完全贯穿
Drawing intermediate diameter
Φ37
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ37
Drawing outer counterbore
Φ6
3
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The two lines represent the diameter and depth adjacent to the counterbore/depth symbols. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ6
3
Drawing outer diameter
Φ53
0
-0.046
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ53
0
-0.046
Drawing outer mounting holes
8×Φ3.4 through
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawing8×Φ3.4 完全贯穿
Drawing outer pitch circle
Φ44
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ44
Drawing overall thickness
7.5
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawing7.5
Drawing register diameter
Φ50 H7
+0.03
0
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawingΦ50 H7
+0.03
0
Drawing shoulder thickness
6±0.02
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawing6±0.02
Family card dimensions
φ50*7.5 mm
Manufacturer specification
Configuration: HPS-TSJ053-66; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
Hypersen Chinese force-sensor family and model summaryHPS-TSJ053-66扭矩传感器量程为66Nm,产品尺寸为φ50*7.5mm,可承受150%过载。
Hysteresis
≤±0.5 %F.S.
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing滞后(%F.S.)
≤±0.5
Input resistance
700±5 Ω
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing输出/输入电阻(Ω)
750±50/700±5
Insulation resistance
≥5000 MΩ
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω.
HPS-TSJ053-66 official technical page and embedded mechanical drawing绝缘电阻(Ω)
≥5000M(50VDC)
Nonlinearity
≤±0.5 %F.S.
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing非线性(%F.S.)
≤±0.5
Operating temperature
-20~80 °C
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing工作温度(℃)
-20~80
Output resistance
750±50 Ω
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing输出/输入电阻(Ω)
750±50/700±5
Output signal
1.5±0.2 mV/V
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. The family card dimensions are diameter 50 by 7.5 mm while the drawing outer diameter is 53. The overview output is 1.5±0.5 mV/V but the exact-page table is 1.5±0.2 mV/V; source revision applicability is unresolved.
HPS-TSJ053-66 official technical page and embedded mechanical drawing输出信号(mV/V)
1.5±0.2
Output signal
1.5±0.5 mV/V
Manufacturer specification
Configuration: HPS-TSJ053-66; family overview table; The exact-page table instead prints 1.5±0.2 mV/V; revision applicability is unresolved.
Hypersen Chinese force-sensor family and model summaryHPS-TSJ053-66
66
1.5±0.5
Output type
Analog
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The dash footnote labels analog output; no sampling frequency is stated.
HPS-TSJ053-66 official technical page and embedded mechanical drawing–模拟量输出
Repeatability
≤±0.5 %F.S.
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing重复性(%F.S.)
≤±0.5
Safe overload source limit
≤150 %F.S.
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating.
HPS-TSJ053-66 official technical page and embedded mechanical drawing安全过载(%F.S.)
≤150
Sensitivity temperature coefficient
≤±0.5 %F.S./10 °C
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed.
HPS-TSJ053-66 official technical page and embedded mechanical drawing灵敏度温度系数((
%F.S./10℃
))
≤±0.5
Supply voltage
5~15 V DC
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing供电电压(V)
DC 5~15
Torque measurement range
66 N·m
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing量程(Nm)
66
Zero output
≤±1 %F.S.
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.
HPS-TSJ053-66 official technical page and embedded mechanical drawing零点输出(%F.S.)
≤±1
Zero temperature coefficient
≤±0.1 %F.S./10 °C
Manufacturer specification
Configuration: HPS-TSJ053-66; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed.
HPS-TSJ053-66 official technical page and embedded mechanical drawing零点温度系数(
%F.S./10℃
)
≤±0.1