Product details

AC1

Sensors & Perception

Shenzhen Robo Sense Technology Co., Ltd.

AC1

About this product

RoboSense AC1 is a vision sensor for mobile robots. It combines solid-state LiDAR, an RGB camera and an inertial measurement unit to align depth, image and motion data in hardware. Developers can use its outputs for obstacle detection, mapping and localization in indoor and outdoor settings. The AC Studio developer toolkit provides drivers, calibration and data-fusion tools.

Model
AC1
Category
Sensors & Perception, Components

Product family: Active Camera

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Data interface

USB 3.2 Gen 1

Manufacturer specification

Configuration: AC1; Device data interface, developer table.

RoboSense Active Camera developer specification table
Data Interface USB 3.2 Gen1

Depth blind zone

0.1 m

Manufacturer specification

Configuration: AC1; At 90% target reflectivity, developer table.

RoboSense Active Camera developer specification table
Blind Zone 0.1m@90% Reflectivity

Depth fov

120 × 60 °

Manufacturer specification

Configuration: AC1; Horizontal × vertical. Product page depth field, not the Wiki's separate LiDAR field.

RoboSense Active Camera AC1 product specifications
120°×60° Depth FOV (H×V)

Depth frame rate

10 Hz

Manufacturer specification

Configuration: AC1; LiDAR mode, developer table.

RoboSense Active Camera developer specification table
Frame Rate 10 Hz

Depth technology

VCSEL + SPAD + CMOS

Manufacturer specification

Configuration: AC1; All-solid-state depth module.

RoboSense Active Camera AC1 product specifications
VCSEL+SPAD+CMOS All-Solid-State Module

Dimensions

95 × 80 × 40 mm

Manufacturer specification

Configuration: AC1; Length × height × width, developer table.

RoboSense Active Camera developer specification table
Dimensions 95mm*80mm*40mm (length * height * width)

Horizontal angular resolution

0.625 °

Manufacturer specification

Configuration: AC1; Average, developer table.

RoboSense Active Camera developer specification table
Horizontal Resolution Average 0.625°

Imu accelerometer range

±16 g

Manufacturer specification

Configuration: AC1; Acceleration expressed in standard gravity, developer table.

RoboSense Active Camera developer specification table
Accelerometer ±16g

Imu data rate

200 Hz

Manufacturer specification

Configuration: AC1; Adjustable, developer table.

RoboSense Active Camera developer specification table
Data Frequency 200Hz (Adjustable)

Imu gyroscope range

±2000 °/s

Manufacturer specification

Configuration: AC1; IMU, developer table.

RoboSense Active Camera developer specification table
Gyroscope ±2000dps

Imu output axes

6 axes

Manufacturer specification

Configuration: AC1; IMU data output, developer table.

RoboSense Active Camera developer specification table
Degrees of Freedom 6-Axis Data Output

Ingress protection

IP54

Manufacturer specification

Configuration: AC1; Device rating, developer table.

RoboSense Active Camera developer specification table
Protection Rating IP54

Laser safety class

Class 1

Manufacturer specification

Configuration: AC1; LiDAR laser, developer table.

RoboSense Active Camera developer specification table
Laser Safety Class Class 1 (Eye Safe)

Laser wavelength

940 nm

Manufacturer specification

Configuration: AC1; Manufacturer Active Camera developer table, linked to AC1.

RoboSense Active Camera developer specification table
Laser Wavelength 940nm

Mass

400 g

Manufacturer specification

Configuration: AC1; ±10% tolerance, developer table.

RoboSense Active Camera developer specification table
Weight 400g ± 10%

Maximum range

70 m

Manufacturer specification

Configuration: AC1; Manufacturer maximum. No reflectivity or accuracy is attached to the maximum value.

RoboSense Active Camera AC1 product specifications
With a maximum range of up to 70m

Operating temperature

−20 to +60 °C

Manufacturer specification

Configuration: AC1; Device operating range.

RoboSense Active Camera AC1 product specifications
-20℃~+60℃ Operating Temperature

Outdoor illumination

100 klux

Manufacturer specification

Configuration: AC1; Manufacturer headline illumination, no ranging-accuracy inference.

RoboSense Active Camera AC1 product specifications
100KLux Sunlight Interference Resistance

Point rate

173,333 points/s

Manufacturer specification

Configuration: AC1; Approximate, developer table.

RoboSense Active Camera developer specification table
Points per Second ~173333 points/sec

Power interface

DC

Manufacturer specification

Configuration: AC1; Device power input, developer table.

RoboSense Active Camera developer specification table
Power Interface DC

Release date

2025-03-28

Manufacturer specification

Configuration: AC1; Official launch announcement, day precision. No shipment date established.

RoboSense Launches AC1, 28 March 2025
2025.03.28 RoboSense S henZhen , China, March 2 8 , 2025 – RoboSense (2498.HK), a pioneering AI-driven robotics technology company, has announced the launch of AC1, the first product in its groundbreaking Active Camera series, along with the AI-Ready ecosystem, providing an all-in-one solution for robotic perception development.

Rgb fov

144 × 78 °

Manufacturer specification

Configuration: AC1; Horizontal × vertical.

RoboSense Active Camera AC1 product specifications
144°×78° RGB FOV (H×V)

Rgb frame rate

30 Hz

Manufacturer specification

Configuration: AC1; RGB camera, developer table.

RoboSense Active Camera developer specification table
Frame Rate 30 Hz

Rgb output formats

NV12, RGB24

Manufacturer specification

Configuration: AC1; RGB camera, developer table.

RoboSense Active Camera developer specification table
CIS Output Format NV12, RGB24

Rgb resolution

1920 × 1080 px

Manufacturer specification

Configuration: AC1; RGB camera, developer table.

RoboSense Active Camera developer specification table
Resolution 1920*1080

Rgb shutter

Rolling shutter

Manufacturer specification

Configuration: AC1; RGB camera, developer table.

RoboSense Active Camera developer specification table
Shutter Type Rolling Shutter

Sensor fusion

LiDAR, RGB camera and IMU

Manufacturer specification

Configuration: AC1; Hardware-level data fusion.

RoboSense Launches AC1, 28 March 2025
Spatiotemporal fusion of three core sensors: LiDAR, camera, and IMU

Storage temperature

−20 to +70 °C

Manufacturer specification

Configuration: AC1; Device storage, developer table.

RoboSense Active Camera developer specification table
Storage Temperature -20°C ~ +70°C

Typical power consumption

12.6 W

Manufacturer specification

Configuration: AC1; Standard probe module, developer table.

RoboSense Active Camera developer specification table
Power Consumption 12.6W (Typical)

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save selected and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.