Product details

FT-1000-C001

Motors & Drives

Shenzhen FEETECH RC Model Co., Ltd.

FT-1000-C001

About this product

FT-1000-C001 is a geared digital servo with pulse-width position control. Its exact manufacturer parameter table distinguishes rated torque from peak stall torque, gives the operating voltage range and defines its angle command using a 500–2500 microsecond pulse range.

Model
FT-1000-C001
Category
Motors & Drives, Components

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Bearing type

Ball bearings

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
轴承 Bearing: 滚珠轴承 Ball bearings

Case dimensions

A:100mm B:51mm C: 90.9mm

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
尺寸 Size: A:100mm B:51mm C: 90.9mm

Case material

Aluminum

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
外壳 Case: Aluminum

Command signal

Pulse width modulation

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
控制信号Command si gnal Pulse width modulation

Connector wire length

43±1CM

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
舵机线 Connector wire: 43±1CM

Control system type

Digital comparator

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
控制系统类型 Control System Type Digital comparator

Deadband width

≤4 μ sec µs

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
死区宽度Dead band width ≤4 μ sec

Gear material

Steel

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
齿轮类型 Gear type: 钢 Steel

Gear ratio

1/390

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
减速比Gear Ratio: 1/390

Idle current

25mA@24V

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
静态电流Idle current (atstopped) 25mA@24V

Mechanical angle limit

NO limit

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
机构极限角度 Limit angle: NO limit

Motor type

Brushless Motor

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
马达 Motor: Brushless Motor

Neutral pulse width

1500 μ sec µs

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
中立位置Stop position 1500 μ sec

No-load current

300mA@24V

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
空载电流 Runnig current(at no load) : 300mA@24V

No-load speed

0.588sec/60°(17RPM)@24V

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained. The source combines time per 60 degrees and, when provided, rpm; no single unit is assigned to this combined value.

FT-1000-C001
空载速度 No load speed: 0.588sec/60°(17RPM)@24V

Operating temperature

-40℃~60℃ °C

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
运行温度 Operating Temperature Range: -40℃~60℃

Operating voltage range

16-28V

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
工作电压Operating Voltage Range: 16-28V

Output spline

Round (12 mm)

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
出力轴 Horn gear spline: 圆型(12mm)

Peak stall torque

1000kg.cm@ 24 V kg·cm

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained. Torque remains in the manufacturer’s kg.cm notation; no SI conversion or independent performance verification is implied.

FT-1000-C001
堵转扭矩 Peak stall torque: 1000kg.cm@ 24 V

Pulse width range

500~2500 μ sec µs

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
脉冲宽度范围Pulse width range 500~2500 μ sec

Rated torque

333kg.cm@24V kg·cm

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained. Torque remains in the manufacturer’s kg.cm notation; no SI conversion or independent performance verification is implied. The source does not define a thermal steady-state test or continuous-duty cooling setup.

FT-1000-C001
额定扭矩 Rated torque: 333kg.cm@24V

Rotation direction

Clockwise(at 1500→2000μsec)

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
旋转方向Rotating direction 顺时针 Clockwise(在1500→2000μsec)

Running angle

180±5°(at 500→2500μsec)

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
操作角度Running degree 180±5°(at 500→2500μsec)

Stall current

9.8A@24V

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
堵转电流 Stall current: 9.8A@24V

Storage temperature

-40℃~80℃ °C

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
存储温度 Storage Temperature Range -40℃~80℃

Weight

1000g±5g

Manufacturer specification

Configuration: FT-1000-C001; Manufacturer claim; exact FT-1000-C001 parameter table. All voltage, stall/rated/no-load and pulse-width qualifiers are retained.

FT-1000-C001
重量 Weight: 1000g±5g

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.