Product details

Z-EFG-C80

Grippers & End Effectors

HITBOT

Z-EFG-C80

About this product

Z-EFG-C80 is a HITBOT two-finger parallel electric gripper in the manufacturer's Collaborative Electric Gripper portfolio. Its integrated controller supports electrically controlled gripping for robot end-effector integration. The exact model's stroke, force, motion time, electrical requirements and environmental limits are recorded in Specifications. The linked PDF identifies C80 on page 1 but later pages carry a C65 heading; later-page technical details have not been transferred. Cover image: Manufacturer reference illustration.

Model
Z-EFG-C80
Category
Grippers & End Effectors, Components

Product family: Z-EFG Collaborative Electric Grippers

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Body mass

1.5 kg

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
重量 1.5kg

Cable conductor count

12

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
出线规格 线长2m,12芯线

Cable length

2 m

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
出线规格 线长2m,12芯线

Control interface

RS-485 (Modbus RTU), EtherCAT, I/O

Manufacturer specification

Configuration: Z-EFG-C80; linked product manual; PDF page 1; Manufacturer-linked exact-model manual, PDF page 1. No dated hardware-revision mapping is stated; retain this claim within the manual's stated configuration. Only the C80-labelled first page is used. Later pages incorrectly identify C65 and are excluded. Separate ordering codes for interfaces are not provided.

HITBOT manual-20
控制方式:485(Modbus RTU)、EtherCAT、I/O

Dimensions

95 × 80 × 97 mm

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model. Dimensions in the printed order; axis labels are not specified.

HITBOT collab-20
尺寸规格 95*80*97mm

Gripping force

40~140 N

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model. Adjustable.

HITBOT collab-20
夹持力 40~140N(可调)

Jaw motion

Two-finger parallel motion

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
运动方式 二指平动

Minimum one-way stroke time

0.6 s

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
单向行程运动最短时间 0.6s

Motor type

Servo motor

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
电机类型 伺服电机

Operating humidity

35~80 %RH

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model. No frosting, as explicitly stated by the manufacturer.

HITBOT collab-20
使用湿度范围 35~80%RH(不结霜)

Operating temperature

5~55 °C

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
使用温度范围 5~55℃

Operating voltage

24V±10%

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
工作电压 DC24V±10%

Peak current

2 A

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
峰值电流 2A

Power

20 W

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
功率 20W

Power-off holding

Built-in brake; power-off self-locking

Manufacturer specification

Configuration: Z-EFG-C80; linked product manual; PDF page 1; Manufacturer-linked exact-model manual, PDF page 1. No dated hardware-revision mapping is stated; retain this claim within the manual's stated configuration. Only the C80-labelled first page is used.

HITBOT manual-20
内置抱闸,可断电自锁

Protection rating

IP40

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
防护等级 IP40

Rated current

0.8 A

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
额定电流 0.8A

Recommended gripping mass

≤3 kg

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model. Recommended handling mass, not a tested maximum payload; fixture and contact conditions are not specified.

HITBOT collab-20
推荐夹持重量 ≤3kg

Relubrication interval

Every six months or one million operations

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
运动元件油脂补给 每六个月或者动作一百万次/回

Repeat positioning accuracy

±0.02 mm

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
重复定位精度 ±0.02mm

Total stroke

80 mm

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model. Adjustable.

HITBOT collab-20
总行程 80mm(可调)

Transmission mechanism

Rack and pinion + gearbox

Manufacturer specification

Configuration: Z-EFG-C80; current product-page table; Manufacturer specification for the exact named model.

HITBOT collab-20
传动方式 齿轮齿条+减速箱

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.