Product details

iHSV42-40-05-24

Motors & Drives

Shenzhen Just Motion Control Electromechanics Co., Ltd.

iHSV42-40-05-24

About this product

iHSV42-40-05-24 is a JMC integrated AC servo motor combining its motor and driver in one assembly. It belongs to the manufacturer’s pulse-controlled iHSV family and uses fully closed-loop feedback. The exact model has its own manufacturer photograph and drawing; specifications retain the published measurement labels and tolerances.

Model
iHSV42-40-05-24
Category
Motors & Drives, Components

Product family: iHSV pulse integrated AC servo motors

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Back-emf constant

3.26 V/krpm

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Back-EMF constant (V/krpm) 3.26

Feedback control

Fully closed loop

Manufacturer specification

Configuration: iHSV42-40-05-24; Exact manufacturer model page.

iHSV42-40-05-24
◼ Fully closed loop

Holding torque

0.125 N·m

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Drawing calls this holding torque; not relabeled as rated or continuous torque.

iHSV42-40-05-24
Holding Torque: (N.M) 0.125

Insulation class

B

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
INSULATION CLASSE (UL) B

Line-to-line resistance

2 Ω

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV42-40-05-24
line-line Resistant (Ω ±10%) 2

Motor phase count

3 phases

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
phase 3

No-load current

0.45 A

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±0.15 A.

iHSV42-40-05-24
No Load current: (A±0.15) 0.45

No-load speed

5200 rpm

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±10%.

iHSV42-40-05-24
No Load speed: (rpm±10%) 5200

Rated motor current

3.4 A

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±20%.

iHSV42-40-05-24
Rated current: (A±20%) 3.4

Rated output power

52 W

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Rated Power: (W) 52

Rated speed

4000 rpm

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted. Manufacturer tolerance ±7%.

iHSV42-40-05-24
Rated Speed: (rpm ±7%) 4000

Rated voltage

24 V DC

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Rated Voltage: (V) 24

Rotor inertia

95 g·cm²

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Rotor Inertia (g.cm²) 95

Selectable command resolution

800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000 or 51200 pulses/revolution; separate default setting

Reported claim

Configuration: iHSV42-40-05-24; DIP-switch pulse/revolution command settings from the exact model page. Default value is not numerically specified and is not inferred. This is commanded pulse resolution, not encoder resolution.

iHSV42-40-05-24
Pius/rev | SW1 | SW2 | SW3 | SW4 Default | on | on | on | on 800 | off | on | on | on 1600 | on | off | on | on 3200 | off | off | on | on 6400 | on | on | off | on 12800 | off | on | off | on 25600 | on | off | off | on 51200 | off | off | off | on 1000 | on | on | on | off 2000 | off | on | on | off 4000 | on | off | on | off 5000 | off | off | on | off 8000 | on | on | off | off 10000 | off | on | off | off 20000 | on | off | off | off 40000 | off | off | off | off

Torque constant

0.044 N·m/A

Reported claim

Configuration: iHSV42-40-05-24; Manufacturer drawing attached to the exact model page; visually transcribed from the archived original. Blank table cells omitted.

iHSV42-40-05-24
Torque coefficient (N.M/A) 0.044

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.