Product details

FM2-07013KTN266

Motors & Drives

Leadshine

FM2-07013KTN266

About this product

Leadshine FM2-07013KTN266 is a three-phase FM2 frameless motor offered for robotic joints. It is a motor component for integration with separately selected mechanical support and drive electronics. The exact-model technical table specifies a 48 V DC link, 1 N·m rated torque and 2600 rpm rated speed. Electrical, inertia, insulation and wiring claims retain their printed units and conditions. The cover is the manufacturer’s ring-component reference illustration assigned to this model; it does not show the complete installed motor assembly. Cover image: Manufacturer series image; size may vary. Additional integration guidance is explicitly identified as the manufacturer’s family-level advice.

Model
FM2-07013KTN266
Category
Motors & Drives, Components

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Back emf constant

7.3 10⁻³ V/rpm

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred. The printed multiplier is 10^-3 V/rpm; no RMS/peak voltage convention is inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Back EMF Constant (X10⁻³V/rpm) 7.3

Control capabilities with external feedback and drive

Position, speed and torque control

Reported claim

Configuration: FM2-07013KTN266 | Manufacturer frameless-motor family guidance; Family-level FAQ printed on this exact product page; manufacturer advisory claim, not a separately characterized exact-model rating. Requires an encoder and a compatible closed-loop drive. Force/impedance control is stated only for some solutions, not guaranteed for this motor alone.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Yes. With an encoder and a closed-loop drive, high-precision position, speed, and torque control are achievable. Some solutions support impedance/force control modes.

Dc link voltage

48 V

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
DC Link Voltage (V) 48

Environmental construction

Open structure; application protection required

Reported claim

Configuration: FM2-07013KTN266 | Manufacturer frameless-motor family guidance; Family-level FAQ printed on this exact product page; manufacturer advisory claim, not a separately characterized exact-model rating. No IP rating, humidity limit or operating temperature limit is stated by this passage.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
The motor has an open structure. Additional protection (e.g., dust covers or sealed cavities) is recommended when integrating into the end application.

External drive requirement

Servo drive required

Reported claim

Configuration: FM2-07013KTN266 | Manufacturer frameless-motor family guidance; Family-level FAQ printed on this exact product page; manufacturer advisory claim, not a separately characterized exact-model rating. Motor component requires separate compatible drive electronics. This does not state that a drive is included.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
A servo drive is required. We offer an in-house integrated ring drive or an external Mini drive, and can also recommend compatible models.

Insulation class

F

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Insulation Class F

Insulation resistance

DC500V, above 100MΩ

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred. Source states above 100 MΩ under 500 V DC; it is not an equality.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Insulation Resistance DC500V, above 100MΩ

Line-to-line resistance

0.163±10% (20℃) Ω

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred. At 20 °C, with the printed ±10% tolerance retained.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Resistance Line-line (Ω) 0.163±10% (20℃)

Manufacturer normal service-life claim

>20000 h

Reported claim

Configuration: FM2-07013KTN266 | Manufacturer frameless-motor family guidance; Family-level FAQ printed on this exact product page; manufacturer advisory claim, not a separately characterized exact-model rating. General manufacturer FAQ claim. Exact load, duty, ambient temperature and cooling test conditions are not supplied; not a separately verified endurance guarantee for this full-code configuration.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Normal service life exceeds 20,000 hours, suitable for 7×24 continuous operation.

Mass

0.264 kg

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Weight (kg) 0.264

Maximum speed

4,600 rpm

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Maximum Speed (rpm) 4600

Ntc lead-wire specification

UL1430 28AWG, brown

Reported claim

Configuration: FM2-07013KTN266; NTC column of the manufacturer wiring table; no certification claim inferred from the printed wire specification.

FM2-07013KTN266 manufacturer drawing and wiring definition
YELLOW | RED | BLACK | BROWN 18AWG Silicone flexible cord | UL1430 28AWG

Ntc nominal resistance

100 kΩ

Reported claim

Configuration: FM2-07013KTN266; At 25 °C; nominal NTC thermistor resistance. Temperature sensor lead is brown.

FM2-07013KTN266 manufacturer drawing and wiring definition
NTC(100KΩ@25℃)

Number of phases

3

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Number of phases 3

Number of pole pairs

10

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Number of pole pairs (P) 10

Peak current

36 A

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Peak Current (A) 36

Peak torque

3.5 N·m

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Peak Torque (N.m) 3.5

Phase lead-wire colours

U: yellow; V: red; W: black

Reported claim

Configuration: FM2-07013KTN266; Manufacturer wiring table column order; colours translated only into visible English casing.

FM2-07013KTN266 manufacturer drawing and wiring definition
U | V | W | NTC(100KΩ@25℃) YELLOW | RED | BLACK | BROWN

Phase lead-wire construction

Silicone flexible cord

Reported claim

Configuration: FM2-07013KTN266; Phase U/V/W leads; original construction wording.

FM2-07013KTN266 manufacturer drawing and wiring definition
18AWG Silicone flexible cord

Phase lead-wire gauge

18 AWG

Reported claim

Configuration: FM2-07013KTN266; Phase U/V/W leads; manufacturer printed wiring definition.

FM2-07013KTN266 manufacturer drawing and wiring definition
18AWG Silicone flexible cord

Rated current

9.5 A

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Rated Current (A) 9.5

Rated speed

2,600 rpm

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Rated Speed (rpm) 2600

Rated torque

1 N·m

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Rated Torque (N.m) 1.0

Recommended rotor adhesive-fit clearance

approximately 0.02 mm

Reported claim

Configuration: FM2-07013KTN266 | Manufacturer frameless-motor family guidance; Family-level FAQ printed on this exact product page; manufacturer advisory claim, not a separately characterized exact-model rating. Approximate manufacturer installation recommendation; shaft glue groove recommended.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
The rotor is fixed with adhesive, with a clearance of approximately 0.02 mm; a glue groove is recommended on the shaft.

Recommended stator adhesive-fit clearance

≥0.02 mm

Reported claim

Configuration: FM2-07013KTN266 | Manufacturer frameless-motor family guidance; Family-level FAQ printed on this exact product page; manufacturer advisory claim, not a separately characterized exact-model rating. Manufacturer installation recommendation; glue groove recommended; not a dimensional tolerance on the stator.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
The stator can be fixed by thermal shrink fitting (recommended interference ≥ 0.02 mm) or adhesive bonding (clearance ≥ 0.02 mm, with a glue groove recommended).

Recommended stator shrink-fit interference

≥0.02 mm

Reported claim

Configuration: FM2-07013KTN266 | Manufacturer frameless-motor family guidance; Family-level FAQ printed on this exact product page; manufacturer advisory claim, not a separately characterized exact-model rating. Manufacturer installation recommendation; not a tolerance on the stator drawing.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
The stator can be fixed by thermal shrink fitting (recommended interference ≥ 0.02 mm) or adhesive bonding (clearance ≥ 0.02 mm, with a glue groove recommended).

Rotor moment of inertia

0.28 10⁻⁴ kg·m²

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred. The printed multiplier is 10^-4 kg·m²; the numeric value retains this scaled unit.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Rotor Moment of Inertia (x10⁻⁴kg.‌m²‌) 0.28

Stator and ntc insulation strength

600VAC/1S/2mA&300VAC/1S/5mA

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred. Source order is stator, then NTC: 600 V AC / 1 s / 2 mA, and 300 V AC / 1 s / 5 mA.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
(stator&NTC) Insulation Strength 600VAC/1S/2mA&300VAC/1S/5mA

Stator winding inductance

0.34±20% (20℃) mH

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred. At 20 °C, with the printed ±20% tolerance retained.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Stator Winding Inductance (mH) 0.34±20% (20℃)

Supported optional encoder types

Incremental, absolute and magnetic

Reported claim

Configuration: FM2-07013KTN266 | Manufacturer frameless-motor family guidance; Family-level FAQ printed on this exact product page; manufacturer advisory claim, not a separately characterized exact-model rating. Manufacturer answer concerns an optional integrated configuration; encoder inclusion in this listed motor SKU is not asserted. Interface, voltage and current compatibility must be confirmed.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Yes. Incremental, absolute, and magnetic encoders are supported, enabling closed-loop control and high-precision positioning.

Torque constant

0.121 N·m/A

Reported claim

Configuration: FM2-07013KTN266; Exact full-order-code manufacturer technical table; manufacturer claim. Rated and peak values are distinct; unspecified duty and cooling conditions are not inferred.

FM2-07013KTN266 Frameless Motor | 272W High Torque Density Motor for Robotic Joints | 48V
Torque Constant (N.m/A) 0.121

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.