Product details

DM-H3510

Motors & Drives

Shenzhen Damao Technology Co., Ltd.

DM-H3510

About this product

DM-H3510 is a DAMIAO wheel-hub motor for motion-control integration. Its compact hub combines a motor and drive with CAN feedback. Peak duration and duty cycle are not specified. An exact release date is not verified.

Model
DM-H3510
Category
Motors & Drives, Components

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Can communication-loss protection

Exit enabled mode if no CAN command arrives within the configured interval

Manufacturer specification

Configuration: DM-H3510; The timeout is configurable; no numerical default is stated.

DM-H3510 official table, visually transcribed
设定周期内没有收到CAN指令将自动退出“使能模式”

Can feedback

Motor speed, position, torque and temperature

Manufacturer specification

Configuration: DM-H3510; Manufacturer exact-product feature statement.

DM-H3510_轮毂电机_产品中心_深圳市达妙科技有限公司
可通过CAN总线反馈电机速度、位置、转矩、电机温度等信息。

Control interface (published base table)

CAN@1Mbps, CANFD@5Mbps

Manufacturer specification

Configuration: DM-H3510; Published base specification table.

DM-H3510 official table, visually transcribed
控制接口 CAN@1Mbps、CANFD@5Mbps

Control modes

MIT; position-speed; speed; hybrid force-position

Manufacturer specification

Configuration: DM-H3510; Control-mode names translated from the official table.

DM-H3510 official table, visually transcribed
控制模式 MIT模式 位置速度模式 速度模式 力位混控模式

Drive overtemperature threshold

120 degC

Manufacturer specification

Configuration: DM-H3510; Protection threshold; drive overheating exits enabled mode. This is not an ambient temperature rating.

DM-H3510 official table, visually transcribed
防护温度:120°C

Encoder type

Magnetic

Manufacturer specification

Configuration: DM-H3510; Manufacturer specification for this model; additional measurement conditions are not stated.

DM-H3510 official table, visually transcribed
编码器类型 磁编

Height

31.5 mm

Manufacturer specification

Configuration: DM-H3510; Manufacturer table dimension.

DM-H3510 official table, visually transcribed
高度 31.5mm

Integrated drive

Motor and drive integrated

Manufacturer specification

Configuration: DM-H3510; Manufacturer exact-product feature statement.

DM-H3510_轮毂电机_产品中心_深圳市达妙科技有限公司
电机和驱动器一体化设计,结构紧凑,集成度高。

Maximum can fd bitrate

5 Mbps

Manufacturer specification

Configuration: DM-H3510; Maximum supported CAN FD bitrate; network configuration is not specified.

DM-H3510_轮毂电机_产品中心_深圳市达妙科技有限公司
支持CAN FD功能,最高波特率可达5Mbps。

Maximum no-load speed

1,700 rpm

Manufacturer specification

Configuration: DM-H3510; Maximum speed under no load.

DM-H3510 official table, visually transcribed
空载最大转速 1700rpm

Motor mass

116 g

Manufacturer specification

Configuration: DM-H3510; Approximate manufacturer motor mass; not asserted to include a separate drive.

DM-H3510 official table, visually transcribed
电机重量 约116g

Outside diameter

42 mm

Manufacturer specification

Configuration: DM-H3510; Manufacturer table dimension.

DM-H3510 official table, visually transcribed
外径 42mm

Parameter-tuning interface

UART@921600bps

Manufacturer specification

Configuration: DM-H3510; Manufacturer specification for this model; additional measurement conditions are not stated.

DM-H3510 official table, visually transcribed
调参接口 UART@921600bps

Peak phase current

1.88 A

Manufacturer specification

Configuration: DM-H3510; 24 V nominal configuration; Peak value; permitted duration and duty cycle are not stated.

DM-H3510 official table, visually transcribed
峰值相电流 1.88A

Peak torque

0.454 N m

Manufacturer specification

Configuration: DM-H3510; Peak value; duration and duty cycle are not stated.

DM-H3510 official table, visually transcribed
峰值扭矩 0.454NM

Phase inductance

470 uH

Manufacturer specification

Configuration: DM-H3510; measurement method is not stated.

DM-H3510 official table, visually transcribed
相电感 470uh

Phase resistance

2.76 ohm

Manufacturer specification

Configuration: DM-H3510; measurement method is not stated.

DM-H3510 official table, visually transcribed
相电阻 2.76Ω

Pole pairs

14

Manufacturer specification

Configuration: DM-H3510; Manufacturer specification for this model; additional measurement conditions are not stated.

DM-H3510 official table, visually transcribed
极对数 14

Rated phase current

0.79 A

Manufacturer specification

Configuration: DM-H3510; 24 V nominal configuration; Rated value; thermal and duty conditions are not stated.

DM-H3510 official table, visually transcribed
额定相电流 0.79A

Rated speed

500 rpm

Manufacturer specification

Configuration: DM-H3510; Rated manufacturer value; test setup and thermal conditions are not stated.

DM-H3510 official table, visually transcribed
额定转速 500rpm

Rated torque

0.1 N m

Manufacturer specification

Configuration: DM-H3510; Rated manufacturer value; test setup and thermal conditions are not stated.

DM-H3510 official table, visually transcribed
额定扭矩 0.1NM

Rated voltage

24 V

Manufacturer specification

Configuration: DM-H3510; Nominal rated voltage. Not an operating range.

DM-H3510 official table, visually transcribed
额定电压 24V

Recommended maximum motor-temperature setting

100 degC

Manufacturer specification

Configuration: DM-H3510; User-configurable motor-temperature protection setting; manufacturer recommends no more than 100 degrees C. Exits enabled mode on overheating.

DM-H3510 official table, visually transcribed
建议不超过100°C

Recommended maximum overcurrent setting

9.8 A

Manufacturer specification

Configuration: DM-H3510; Configurable protection setting; exits enabled mode on overcurrent. Current type is not specified.

DM-H3510 official table, visually transcribed
建议不超过9.8A

Recommended maximum overvoltage setting

30 V

Manufacturer specification

Configuration: DM-H3510; Configurable protection recommendation; not normal operating voltage.

DM-H3510 official table, visually transcribed
建议不超过30V

Recommended minimum supply voltage in undervoltage instructions

15 V

Manufacturer specification

Configuration: DM-H3510; Undervoltage-protection instruction; configurable trip threshold not stated.

DM-H3510 official table, visually transcribed
电源电压不低于15V

Reduction ratio (manufacturer notation)

1:1

Manufacturer specification

Configuration: DM-H3510; The exact manufacturer ratio convention is retained; it is not inverted or reinterpreted.

DM-H3510 official table, visually transcribed
减速比 1:1

Slot count (manufacturer table)

24

Manufacturer specification

Configuration: DM-H3510; The source row is slot count.

DM-H3510 official table, visually transcribed
槽数 24

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.