Product details

LT-PG2-200A

Motion control and actuation

LH-TC

LT-PG2-200A

About this product

A two-finger pneumatic gripper for robotic workpiece handling.

Model
LT-PG2-200A
Category
Motion control and actuation, Components, Grippers & End Effectors

Product family: LT-PG2

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Air consumption per double stroke

0 cm³

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
耗气量(cm3)(双程) 0.0

Closing force

2,960 N

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
闭合力(N) 2960

Ingress protection

IP40

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
防护等级(IP) IP40

Mass

5.1 kg

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
自重(kg) 5.1

Maximum air pressure

0.8 MPa

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
最大气压(Mpa) 0.8

Maximum axial force fz

5,000 N

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
最大轴向力Fz(N) 5000

Maximum finger length

280 mm

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
手指最大长度(mm) 280

Maximum finger mass

6.5 kg

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
手指最大重量(kg) 6.5

Minimum air pressure

0.4 MPa

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
最小气压(Mpa) 0.4

Moment mx

180 N·m

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
力矩Mx(N·m) 180

Moment my

200 N·m

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
力矩My(N·m) 200

Moment mz

140 N·m

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
力矩Mz(N·m) 140

Opening / closing time

0.35/0.35 s

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
开/合时间(s) 0.35/0.35

Opening force

3,110 N

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
张开力(N) 3110

Operating temperature

5℃~90℃ °C

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

2指抓手 - 郑州领航机器人有限公司
F11080003 LT-PG2-200A 25.00 2960 3110 / 14.50 5℃~90℃ 查看详情>>

Order code

F11080003

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

2指抓手 - 郑州领航机器人有限公司
F11080003 LT-PG2-200A 25.00 2960 3110 / 14.50 5℃~90℃ 查看详情>>

Rated air pressure

0.6 MPa

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
额定气压(Mpa) 0.6

Recommended workpiece mass

14.5 kg

Manufacturer specification

Configuration: LT-PG2-200A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
建议工件重量(kg)① 14.5

Repeatability

0.02 mm

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
重复精度(mm) 0.02

Single-finger stroke

25 mm

Manufacturer specification

Configuration: LT-PG2-200A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG2-200A 两指平行机械夹爪 - 郑州领航机器人有限公司
单指行程(mm) 25

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save selected and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.