Product details

SEA-C46-02-48-RS485

Motors & Drives

Jingyue Technology

SEA-C46-02-48-RS485

About this product

Jingyue’s 46 mm annular servo drive fits inside compact robot joints. The 12 mm bore routes wiring through the board, while integrated magnetic position feedback closes the control loop. It uses RS485 and is rated for 2.5 A continuous and 6 A peak at a typical 24 V DC supply.

Model
SEA-C46-02-48-RS485
Category
Motors & Drives, Components

Product family: SEA C-Series Board Servo Drives

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Board material

FR-4

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
基板材质 FR-4

Board thickness

1.6 mm

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
板厚 1.6 mm

Brake and i/o

No discrete brake or I/O. Control over the communications interface.

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
抱闸 / IO 无(控制经通讯完成)

Center cable bore

Φ12 mm

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
中心走线孔 Φ12 mm

Communication protocol

RS485

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
通信协议 RS485

Control modes

Position, speed and torque with point-to-point and PVT motion

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
控制模式 位置 / 速度 / 转矩(点到点 / PVT 运动)

Encoder feedback

Integrated magnetic encoder

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
反馈类型 集成式磁编码器

Installation

Screw mounting at the rear of the joint

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
安装方式 螺钉固定于关节后端

Maximum voltage

48 V

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
最大耐压 48 V

Mounting holes

Three open 2.5 mm holes spaced 120° apart on a 46 mm circle

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
安装孔 3 × Φ2.5 通孔(孔心位于 Φ46 外圆 120° 均布,孔口开放)

Net weight

Approximately 9 g

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
净重 约 9 g

Outer diameter

Φ46 mm

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
外形直径 Φ46 mm

Peak current

6 A

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
峰值电流 6 A

Power stage

Three-phase full bridge with precision phase-current sensing

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
功率级 三相全桥 + 精密相电流采样

Product form

Double-sided annular board with a 12 mm wiring bore, installed inside joint housing

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
产品形态 环形板卡(双面布件,中心 Φ12 中孔过线,直接嵌入关节壳体)

Protection

Overvoltage and overtemperature protection. Logs alarms and reports startup self-test faults over the communications interface.

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
保护功能 过压、过温(含故障报警记录,上电自检异常经通讯上报)

Rated current

2.5 A

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
额定电流 2.5 A

Supply voltage

24 V DC typical

Manufacturer specification

Configuration: SEA-C46-02-48-RS485; Exact manufacturer model and technical table. Any stated rating condition is retained in the value or excerpt.

Jingyue SEA-C46-02-48-RS485 product technical specifications
供电电压 24 VDC(典型值)

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save selected and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.