Product details

ECC525

Motors & Drives

Jiangsu Wantai Motor Co., Ltd.

ECC525

About this product

ECC525 is a Wantai EtherCAT motor drive for closed-loop stepper and hybrid servo systems. Its manufacturer documents motor tuning and bus-based control.

Model
ECC525
Category
Motors & Drives, Components

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Communication frequency

100 MHz

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer source; published qualifiers retained.

ECC525
●Communication frequency 100MHz

Configuration interface

Serial port for setting and debugging

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer source; published qualifiers retained.

ECC525
●With serial port setting and debugging function

Cooling method

Natural cooling or forced air cooling

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer environmental table.

ECC525
cooling   method Natural cooling or forced air   cooling

Digital outputs

3 optocoupler-isolated open-collector outputs

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer source; published qualifiers retained.

ECC525
●3 way optocoupler isolated OC output

Load-dependent current range

0.5–8 A

Manufacturer specification

Configuration: ECC525; The exact product page lists this adaptive-current range. It is not relabeled as rated continuous or peak current; detailed electrical table unavailable.

ECC525
●The current can be changed between 0.5-8A as the load changes

Mass

0.2KG

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer environmental table.

ECC525
weight 0.2KG

Motor tuning

Automatic parameter tuning at power-on

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer source; published qualifiers retained.

ECC525
●Parameter power-on auto-tuning function

Operating altitude

Below 1000 meters

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer environmental table.

ECC525
Operating   altitude Below 1000 meters

Operating humidity

40 ~ 90%RH % RH

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer environmental table.

ECC525
humidity 40 ~ 90%RH

Operating temperature

-10℃ ~ +50℃ °C

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer environmental table.

ECC525
temperature -10℃ ~ +50℃

Processor

32-bit floating-point MCU

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer source; published qualifiers retained.

ECC525
ECC525 Ether-CAT Digital Motor Driver adopts the latest floating-point 32-bit MCU digital processing technology, and the drive control algorithm adopts advanced variable current technology and advanced frequency conversion technology. The driver has low heat generation, small motor vibration, and stable operation. This bus-type driver can drive two-phase closed-loop stepper motors. , Three-phase closed-loop stepper motors, a variety of hybrid servo motors, etc. It runs smoothly at low, medium and high speeds, and the noise is very small. The drive integrates the automatic parameter setting function after power-on, which can automatically generate optimal operating parameters for different motors and maximize the performance of the motor.

Storage temperature

-20℃~60℃ °C

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer environmental table.

ECC525
Storage   temperature -20℃~60℃

Supported motor frame series

28, 42, 57, 60 and 86 closed-loop stepper series

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer source; published qualifiers retained.

ECC525
●Can drive a variety of closed-loop stepper motors, such as 28, 42, 57, 60, 86 and other frame closed-loop stepper series motors

Vibration limit

5.9m/s2MAX m/s²

Manufacturer specification

Configuration: ECC525; Exact-model manufacturer environmental table.

ECC525
vibration 5.9m/s2MAX

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.