Product details

DM-J4310P-2EC

Actuators & Joint Modules

Shenzhen Damao Technology Co., Ltd.

DM-J4310P-2EC

About this product

DM-J4310P-2EC is a DAMIAO integrated geared joint actuator combining a motor and drive, with dual magnetic encoders and CAN feedback for motion-control integration. The manufacturer publishes 3.5 N m rated output torque and 12.5 N m peak output torque; the allowed peak duration is not specified. Specifications retain the separate 24 V and 48 V configurations under this named model generation. An exact release date is not verified.

Model
DM-J4310P-2EC
Category
Actuators & Joint Modules, Components

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Can communication-loss protection

Exits enabled mode if no CAN instruction arrives within the configured interval

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Timeout interval is user configurable; no numerical default is specified.

DM-J4310P-2EC official specification table (visually transcribed)
通讯丢失防护,设定周期内没有收到CAN指令将自动退出“使能模式”。

Can feedback

Motor speed, position, torque and temperature

Manufacturer specification

Configuration: DM-J4310P-2EC; Manufacturer product-page feature statement.

DM-J4310P-2EC _关节电机_产品中心_深圳市达妙科技有限公司
可通过CAN总线反馈电机速度、位置、转矩、电机温度等信息。

Can upgrade

Supported

Manufacturer specification

Configuration: DM-J4310P-2EC; Manufacturer product-page feature statement.

DM-J4310P-2EC _关节电机_产品中心_深圳市达妙科技有限公司
支持CAN升级。

Control interface

CAN at 1 Mbps

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Manufacturer specification for the stated model and generation; other test conditions are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
控制接口 CAN@1Mbps

Control modes

MIT; position-speed; speed; hybrid force-position

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Control-mode names translated from the manufacturer table.

DM-J4310P-2EC official specification table (visually transcribed)
控制模式 MIT 模式 位置速度模式 速度模式 力位混控模式

Drive overtemperature protection

120 degC

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Protection threshold; overheating exits enabled mode. This is not an ambient operating temperature rating.

DM-J4310P-2EC official specification table (visually transcribed)
驱动过温防护,防护温度:120°C,过温电机将退出“使能模式”。

Encoder count

2

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Manufacturer specification for the stated model and generation; other test conditions are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
编码器个数 2

Encoder resolution

16 bit

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Manufacturer encoder bit count; not an accuracy specification.

DM-J4310P-2EC official specification table (visually transcribed)
编码器位数 16 位

Encoder type

Single-turn magnetic encoder

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Manufacturer specification for the stated model and generation; other test conditions are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
编码器类型 磁编(单圈)

Height

49.05 mm

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Overall manufacturer table dimension.

DM-J4310P-2EC official specification table (visually transcribed)
高度 49.05mm

Integrated drive

Motor and drive integrated

Manufacturer specification

Configuration: DM-J4310P-2EC; Manufacturer product-page feature statement.

DM-J4310P-2EC _关节电机_产品中心_深圳市达妙科技有限公司
电机和驱动器一体化设计,结构紧凑,集成度高。

Maximum no-load speed

200 rpm

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V configuration; No-load maximum; voltage configuration as indicated.

DM-J4310P-2EC official specification table (visually transcribed)
空载最大转速 200rpm | 450rpm

Maximum no-load speed

450 rpm

Manufacturer specification

Configuration: DM-J4310P-2EC; 48 V configuration; No-load maximum; voltage configuration as indicated.

DM-J4310P-2EC official specification table (visually transcribed)
空载最大转速 200rpm | 450rpm

Motor mass

330 g

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Approximate mass, as published.

DM-J4310P-2EC official specification table (visually transcribed)
电机重量 约 330g

Output position retention

Single-turn absolute output position retained across power loss

Manufacturer specification

Configuration: DM-J4310P-2EC; Manufacturer product-page feature statement.

DM-J4310P-2EC _关节电机_产品中心_深圳市达妙科技有限公司
双编码器,输出轴单圈绝对位置,不惧掉电输出轴绝对位置丢失。

Outside diameter

57 mm

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Overall manufacturer table dimension.

DM-J4310P-2EC official specification table (visually transcribed)
外径 57mm

Overcurrent protection recommendation

Configurable; recommended value no more than 0.98 (unit not specified)

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Exits enabled mode on overcurrent. The manufacturer does not define a unit for 0.98; it is not interpreted as amperes or a normalized percentage.

DM-J4310P-2EC official specification table (visually transcribed)
电机过流防护,根据使用需求设定,建议不超过0.98,过流将退出“使能模式”。

Parameter access

Visual host tuning and CAN parameter read/write

Manufacturer specification

Configuration: DM-J4310P-2EC; Manufacturer product-page feature statement.

DM-J4310P-2EC _关节电机_产品中心_深圳市达妙科技有限公司
支持上位机可视化调试,支持CAN读写参数。

Parameter-tuning interface

UART at 921600 bps

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Manufacturer specification for the stated model and generation; other test conditions are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
调参接口 UART@921600bps

Peak output torque

12.5 N m

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Peak output torque; peak duration and duty cycle are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
峰值扭矩 12.5NM

Peak phase current

20 A

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V configuration; Peak value; permitted peak duration and duty cycle are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
峰值相 / 电源电流 20A/16.5A@24V | 20A/12.8A@48V

Peak phase current

20 A

Manufacturer specification

Configuration: DM-J4310P-2EC; 48 V configuration; Peak value; permitted peak duration and duty cycle are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
峰值相 / 电源电流 20A/16.5A@24V | 20A/12.8A@48V

Peak supply current

16.5 A

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V configuration; Peak value; permitted peak duration and duty cycle are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
峰值相 / 电源电流 20A/16.5A@24V | 20A/12.8A@48V

Peak supply current

12.8 A

Manufacturer specification

Configuration: DM-J4310P-2EC; 48 V configuration; Peak value; permitted peak duration and duty cycle are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
峰值相 / 电源电流 20A/16.5A@24V | 20A/12.8A@48V

Phase inductance

320 uH

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Approximate manufacturer value.

DM-J4310P-2EC official specification table (visually transcribed)
相电感 约 320uH

Phase resistance

580 mohm

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Approximate manufacturer value.

DM-J4310P-2EC official specification table (visually transcribed)
相电阻 约 580mΩ

Pole pairs

14

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Manufacturer specification for the stated model and generation; other test conditions are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
极对数 14

Rated output speed

120 rpm

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Rated speed; value appears in a cell spanning both voltage configurations.

DM-J4310P-2EC official specification table (visually transcribed)
额定转速 120rpm

Rated output torque

3.5 N m

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Rated output torque; temperature, mounting and duty conditions are not stated.

DM-J4310P-2EC official specification table (visually transcribed)
额定扭矩 3.5NM

Rated phase current

4.9 A

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V configuration; Rated operating value; thermal/test conditions not stated.

DM-J4310P-2EC official specification table (visually transcribed)
额定相 / 电源电流 4.9A/3.1A@24V | 4.8A/1.6A@48V

Rated phase current

4.8 A

Manufacturer specification

Configuration: DM-J4310P-2EC; 48 V configuration; Rated operating value; thermal/test conditions not stated.

DM-J4310P-2EC official specification table (visually transcribed)
额定相 / 电源电流 4.9A/3.1A@24V | 4.8A/1.6A@48V

Rated supply current

3.1 A

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V configuration; Rated operating value; thermal/test conditions not stated.

DM-J4310P-2EC official specification table (visually transcribed)
额定相 / 电源电流 4.9A/3.1A@24V | 4.8A/1.6A@48V

Rated supply current

1.6 A

Manufacturer specification

Configuration: DM-J4310P-2EC; 48 V configuration; Rated operating value; thermal/test conditions not stated.

DM-J4310P-2EC official specification table (visually transcribed)
额定相 / 电源电流 4.9A/3.1A@24V | 4.8A/1.6A@48V

Rated voltage

24 V

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V configuration; Nominal voltage; not an operating voltage range.

DM-J4310P-2EC official specification table (visually transcribed)
额定电压 24V | 48V

Rated voltage

48 V

Manufacturer specification

Configuration: DM-J4310P-2EC; 48 V configuration; Nominal voltage; not an operating voltage range.

DM-J4310P-2EC official specification table (visually transcribed)
额定电压 24V | 48V

Recommended minimum supply voltage

15 V

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V configuration; Within the undervoltage-protection instructions; configurable trip threshold is not stated.

DM-J4310P-2EC official specification table (visually transcribed)
电机欠压防护,若电源电压低于设定值,则退出“使能模式”,电源电压不低于15V。

Recommended minimum supply voltage

20 V

Manufacturer specification

Configuration: DM-J4310P-2EC; 48 V configuration; Within the undervoltage-protection instructions; configurable trip threshold is not stated.

DM-J4310P-2EC official specification table (visually transcribed)
电机欠压防护,若电源电压低于设定值,则退出“使能模式”,建议电源电压不低于20V。

Recommended motor overtemperature setting maximum

100 degC

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Configurable protection setting; manufacturer recommends no more than 100 degrees C. Overheating exits enabled mode.

DM-J4310P-2EC official specification table (visually transcribed)
电机过温防护,根据使用需求设定,建议不超过100°C,过温电机将退出“使能模式”。

Recommended overvoltage protection setting maximum

32 V

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V configuration; Configurable protection threshold recommendation, not the normal operating voltage.

DM-J4310P-2EC official specification table (visually transcribed)
电机过压防护,根据使用需求设定,建议不超过32V,过压将退出“使能模式”。

Recommended overvoltage protection setting maximum

60 V

Manufacturer specification

Configuration: DM-J4310P-2EC; 48 V configuration; Configurable protection threshold recommendation, not the normal operating voltage.

DM-J4310P-2EC official specification table (visually transcribed)
电机过压防护,根据使用需求设定,建议不超过60V,过压将退出“使能模式”。

Reduction ratio (manufacturer notation)

10: 1

Manufacturer specification

Configuration: DM-J4310P-2EC; 24 V and 48 V configurations; Ratio is preserved exactly as printed; numerator/denominator convention is not reinterpreted.

DM-J4310P-2EC official specification table (visually transcribed)
减速比 10: 1

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.