Product details

Fairy

Sensors & Perception

Shenzhen Robo Sense Technology Co., Ltd.

Fairy

About this product

RoboSense Fairy in its 48-beam configuration is a mid-range digital LiDAR for mobile robots, mapping equipment and drones. It provides 360° horizontal coverage with a 32° vertical field and outputs 3D point clouds for localization, obstacle detection and mapping. The 48-beam unit is listed as a separate device on the RoboSense store.

Model
Fairy 48-beam
Category
Sensors & Perception, Components

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Angular resolution

0.25 × 0.67 °

Manufacturer specification

Configuration: Fairy 48-beam; Official store figure for the 48-beam variant, in the source axis order.

Fairy 48-Beam 3D LiDAR Sensor | 150m High-Precision Robotic LiDAR – RoboSense
angular resolution of 0.25° × 0.67°

Beam count

48

Manufacturer specification

Configuration: Fairy 48-beam; 48-beam device variant on manufacturer product page.

RoboSense Fairy LiDAR 48- and 96-beam product specifications
The Fairy is available in two versions: 96-beam and 48-beam

Chip architecture

VCSEL and SPAD-SoC

Manufacturer specification

Configuration: Fairy 48-beam; Manufacturer Fairy family transmitter/receiver architecture.

RoboSense Fairy LiDAR 48- and 96-beam product specifications
VCSEL emitting chip and high photon detection efficiency SPAD-SoC chip

Dimensions

Ø75 × H70 mm

Manufacturer specification

Configuration: Fairy 48-beam; Manufacturer Fairy family specification.

RoboSense Fairy LiDAR 48- and 96-beam product specifications
φ75×H70 (mm) Compact size

Field of view

360 × 32 °

Manufacturer specification

Configuration: Fairy 48-beam; Horizontal × vertical. Manufacturer Fairy family value also shown in the 48-beam store listing.

RoboSense Fairy LiDAR 48- and 96-beam product specifications
360°×32° FOV (H×V)

Imu

Integrated

Manufacturer specification

Configuration: Fairy 48-beam; Manufacturer family value, corroborated by the 48-beam store page.

RoboSense Fairy LiDAR 48- and 96-beam product specifications
IMU Integrated

Mass

<350 g

Manufacturer specification

Configuration: Fairy 48-beam; Manufacturer Fairy family specification.

RoboSense Fairy LiDAR 48- and 96-beam product specifications
<350g Light & Agile

Maximum range

150 m

Manufacturer specification

Configuration: Fairy 48-beam; Manufacturer Fairy family maximum also shown in the 48-beam store listing. Reflectivity unspecified.

RoboSense Fairy LiDAR 48- and 96-beam product specifications
150m Longest ranging

Point rate dual return

1,380,000 points/s

Manufacturer specification

Configuration: Fairy 48-beam; Official store reports up to this rate in dual return for the 48-beam device.

Fairy 48-Beam 3D LiDAR Sensor | 150m High-Precision Robotic LiDAR – RoboSense
1.38 million points per second in dual-return mode

Point rate single return

685,000 points/s

Manufacturer specification

Configuration: Fairy 48-beam; Manufacturer corporate page gives 685,000 points/s for the 48-beam version. Store rounds the single-return value to approximately 690,000 points/s.

RoboSense Fairy LiDAR 48- and 96-beam product specifications
1.37 million points per second and 685,000 points per second, respectively

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save selected and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.