Product details

HPS-FT060E

Sensors & Perception

Hypersen Technology (Shenzhen) Co., Ltd.

HPS-FT060E

About this product

HPS-FT060E is Hypersen's digital six-axis force/torque sensor for industrial robots, collaborative robots and factory automation. Its exact-model table lists signed force ranges of ±600 N on Fx/Fy and ±800 N on Fz, with moment ranges of ±15 N·m on Mx/My and ±15 N·m on Mz. The published system uses digital output with an adaptor, with Ethernet, EtherCAT, RS-485 and analog interface options. The manufacturer introduction and parameter table disagree on output data rate (2000 Hz versus 2700 Hz maximum); both claims remain separately qualified pending clarification. The referenced interface, data-rate, overload and mass footnotes are not supplied on this accessible page. Cover image: Manufacturer reference illustration. Exact-model announcement, launch and first-shipping dates are unverified.

Model
HPS-FT060E
Category
Sensors & Perception, Components

Product family: Hypersen HPS-FT six-axis force/torque sensors

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Adc resolution

24 bit

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; ADC bit depth; do not interpret this as effective measurement resolution.

HPS-FT060E official product page and parameter table
Equipped with high performance processor and 24bit ADC

Approximate mass

255 g

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Approximate mass (≈); footnote *4 text is absent from the accessible page, so cable/adaptor inclusion is unresolved.

HPS-FT060E official product page and parameter table
±800N(Fz) | Weight*4 | ≈255g

Cable diameter callout

Diameter 3

Manufacturer specification

Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing.

HPS-FT060E/HPS-060S Dimensional Drawing
⌀3 Cable

Communication interface options

Ethernet, EtherCAT, RS-485 and analog output

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Published system interface options with adaptor. Footnote *1 is referenced but its text is absent from this accessible page; exact adaptor/protocol configuration requires confirmation. No separate products created from these options.

HPS-FT060E official product page and parameter table
Measuring range | ±600N(Fxy) | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output

Crosstalk upper limit

2 %FS

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Strictly less than 2%FS; inter-axis crosstalk, not a combined measurement accuracy claim.

HPS-FT060E official product page and parameter table
Non-linearity | <1.25(%FS) | Crosstalk | <2(%FS)

Customizable ingress protection

IP67

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Optional customizable protection rating, not a separately named product configuration.

HPS-FT060E official product page and parameter table
0.01(%FS)(Mxy) | Protection degree | IP64(Customizable: IP67)

Dimension labeled diameter

78 mm

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Middle dimension explicitly labeled diameter; full published size notation is preserved separately.

HPS-FT060E official product page and parameter table
±15Nm(Mxy) | Size | 87×78(diameter)x28.5mm

External connector type

Cold-pressed terminal

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Exact page names a cold-pressed terminal. The physical sensor/connector drawing can show a different sensor-side socket; cable-end versus sensor-side scope is not clarified.

HPS-FT060E official product page and parameter table
Resolution | 0.01(%FS)(Fxy) | External connector type | Cold-pressed terminal

First published overall dimension

87 mm

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; First value in the printed three-value size notation; axis designation is not stated.

HPS-FT060E official product page and parameter table
±15Nm(Mxy) | Size | 87×78(diameter)x28.5mm

Front locating-hole callouts

2 x diameter 4 (+0.012/0), depth 4; center diameter 10 (+0.015/0), depth 3

Manufacturer specification

Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing.

HPS-FT060E/HPS-060S Dimensional Drawing
2 x ⌀4 +0.012/0 ↧4; ⌀10 +0.015/0 ↧3

Front threaded mounting callout

6 x M4 depth 6; evenly distributed

Manufacturer specification

Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing.

HPS-FT060E/HPS-060S Dimensional Drawing
6 x M4 ↧6 (Evenly distributed)

Front through-hole callout

4 x diameter 5.3 through hole; evenly distributed

Manufacturer specification

Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing.

HPS-FT060E/HPS-060S Dimensional Drawing
4 x ⌀5.3through hole (Evenly distributed)

Introduction data output rate

2,000 Hz

Manufacturer specification

Configuration: HPS-FT060E; product introduction; Manufacturer source discrepancy: introduction states 2000 Hz, while parameter table states maximum 2700 Hz. Conditions/generation are not reconciled; saved as a separate qualified source claim.

HPS-FT060E official product page and parameter table
2000Hz output data rate

Maximum data output rate

2,700 Hz

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Maximum data output rate printed in the parameter table. Footnote *2 text is absent; protocol/filter conditions are not specified. Manufacturer source discrepancy: the same page introduction states 2000 Hz output data rate, while this table states 2700 Hz(max). Exact configuration/generation applicability is unresolved; neither claim silently replaces the other.

HPS-FT060E official product page and parameter table
0.01(%FS)(Fz) | Data output rate*2 | 2700Hz(max)

Maximum dc supply voltage

24 V

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; DC supply range upper endpoint.

HPS-FT060E official product page and parameter table
±15Nm(Mz) | Power supply | DC 12V~24V

Maximum working temperature

55 °C

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Upper endpoint of the published working-temperature range.

HPS-FT060E official product page and parameter table
Model | HPS-FT060E | Working temperature | -10~+55℃

Measured spatial axes

Forces and torques on XYZ

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Six force/moment components across three spatial axes; axis ranges and resolution are listed separately.

HPS-FT060E official product page and parameter table
Measuring force and torque on three spatial axes of XYZ

Measurement range magnitude fx and fy

600 N

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Symmetric signed range: ±600 N on Fx and Fy. This is the full-scale magnitude, not an unsigned one-direction range.

HPS-FT060E official product page and parameter table
Measuring range | ±600N(Fxy) | Communication interface*1 | Ethernet、EtherCAT、RS485、Analog output

Measurement range magnitude fz

800 N

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Symmetric signed range: ±800 N on Fz. This is the full-scale magnitude, not an unsigned one-direction range.

HPS-FT060E official product page and parameter table
±800N(Fz) | Weight*4 | ≈255g

Measurement range magnitude mx and my

15 N·m

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Symmetric signed range: ±15 N·m on Mx and My. This is the full-scale magnitude, not an unsigned one-direction range.

HPS-FT060E official product page and parameter table
±15Nm(Mxy) | Size | 87×78(diameter)x28.5mm

Measurement range magnitude mz

15 N·m

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Symmetric signed range: ±15 N·m on Mz. This is the full-scale magnitude, not an unsigned one-direction range.

HPS-FT060E official product page and parameter table
±15Nm(Mz) | Power supply | DC 12V~24V

Minimum dc supply voltage

12 V

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; DC supply range lower endpoint.

HPS-FT060E official product page and parameter table
±15Nm(Mz) | Power supply | DC 12V~24V

Minimum working temperature

-10 °C

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Lower endpoint of the published working-temperature range.

HPS-FT060E official product page and parameter table
Model | HPS-FT060E | Working temperature | -10~+55℃

Non-linearity upper limit

1.25 %FS

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Strict upper limit (<), expressed as percent full scale; this is non-linearity, not combined accuracy.

HPS-FT060E official product page and parameter table
Non-linearity | <1.25(%FS) | Crosstalk | <2(%FS)

Overload capacity

350 %

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Published overload capacity relative to rated full scale. Footnote *3 is absent; axis combinations, duration and qualification conditions are not defined. No independent testing claim.

HPS-FT060E official product page and parameter table
0.01(%FS)(Mz) | Overload capacity*3 | 350%

Power consumption

0.5 W

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Published parameter-table power consumption; operating load and adaptor inclusion are not further defined.

HPS-FT060E official product page and parameter table
System structure | Digital output + Adaptor | Power consumption | 0.5W

Published size notation

87×78(diameter)x28.5mm

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Literal manufacturer size string. The printed diameter label is retained; coordinate-order conventions are not inferred.

HPS-FT060E official product page and parameter table
±15Nm(Mxy) | Size | 87×78(diameter)x28.5mm

Rear locating-hole callouts

2 x diameter 4 (+0.012/0), depth 4; center diameter 10 (+0.015/0), depth 2

Manufacturer specification

Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing.

HPS-FT060E/HPS-060S Dimensional Drawing
2 x ⌀4 +0.012/0 ↧4; ⌀10 +0.015/0 ↧2

Rear threaded mounting callout

4 x M5 depth 5; evenly distributed

Manufacturer specification

Configuration: HPS-FT060E; manufacturer drawing; Exact manufacturer drawing callout retained as text. No dimensional unit is printed on this drawing; no millimetres inferred. Confirm units, tolerance interpretation and the full drawing before mechanical design. The shared drawing title abbreviates the second model as HPS-060S; both exact FT060E and FT060S pages explicitly embed this same drawing.

HPS-FT060E/HPS-060S Dimensional Drawing
4 x M5 ↧5 (Evenly distributed)

Resolution fx and fy

0.01 %FS

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Resolution as percentage of full scale on Fx and Fy; not an accuracy or noise-floor guarantee.

HPS-FT060E official product page and parameter table
Resolution | 0.01(%FS)(Fxy) | External connector type | Cold-pressed terminal

Resolution fz

0.01 %FS

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Resolution as percentage of full scale on Fz; not an accuracy or noise-floor guarantee.

HPS-FT060E official product page and parameter table
0.01(%FS)(Fz) | Data output rate*2 | 2700Hz(max)

Resolution mx and my

0.01 %FS

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Resolution as percentage of full scale on Mx and My; not an accuracy or noise-floor guarantee.

HPS-FT060E official product page and parameter table
0.01(%FS)(Mxy) | Protection degree | IP64(Customizable: IP67)

Resolution mz

0.01 %FS

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Resolution as percentage of full scale on Mz; not an accuracy or noise-floor guarantee.

HPS-FT060E official product page and parameter table
0.01(%FS)(Mz) | Overload capacity*3 | 350%

Standard ingress protection

IP64

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Standard table protection rating. IP67 is explicitly customizable, not the default. Manufacturer family marketing says IP65 elsewhere without exact generation/form mapping; retained as a qualification gap.

HPS-FT060E official product page and parameter table
0.01(%FS)(Mxy) | Protection degree | IP64(Customizable: IP67)

System structure

Digital output + Adaptor

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Manufacturer specifies digital output plus adaptor; do not assume all listed interfaces are built into the bare sensing head.

HPS-FT060E official product page and parameter table
System structure | Digital output + Adaptor | Power consumption | 0.5W

Third published dimension

28.5 mm

Manufacturer specification

Configuration: HPS-FT060E; exact-model parameter table; Third value in the printed three-value size notation; axis designation is not stated.

HPS-FT060E official product page and parameter table
±15Nm(Mxy) | Size | 87×78(diameter)x28.5mm

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.