Product details

LT-PG3-300A

Motion control and actuation

LH-TC

LT-PG3-300A

About this product

A three-finger centric pneumatic gripper for robotic workpiece handling.

Model
LT-PG3-300A
Category
Motion control and actuation, Components, Grippers & End Effectors

Product family: LT-PG3

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Air consumption per double stroke

2,900 cm³

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
耗气量(cm3)(双程) 2900.0

Closing force

15,950 N

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
闭合力(N) 15950

Ingress protection

IP40

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
防护等级(IP) IP40

Mass

32 kg

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
自重(kg) 32

Maximum air pressure

0.8 MPa

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
最大气压(Mpa) 0.8

Maximum axial force fz

8,000 N

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
最大轴向力Fz(N) 8000

Maximum finger length

250 mm

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
手指最大长度(mm) 250

Maximum finger mass

11.5 kg

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
手指最大重量(kg) 11.5

Minimum air pressure

0.4 MPa

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
最小气压(Mpa) 0.4

Moment mx

400 N·m

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
力矩Mx(N·m) 400

Moment my

400 N·m

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
力矩My(N·m) 400

Moment mz

280 N·m

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
力矩Mz(N·m) 280

Opening / closing time

1.3/1.3 s

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
开/合时间(s) 1.3/1.3

Opening force

16,740 N

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
张开力(N) 16740

Operating temperature

5℃~90℃ °C

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

3指抓手 - 郑州领航机器人有限公司
F13100001 LT-PG3-300A 35 15950 16740 / 79 5℃~90℃ 查看详情>>

Order code

F13100001

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

3指抓手 - 郑州领航机器人有限公司
F13100001 LT-PG3-300A 35 15950 16740 / 79 5℃~90℃ 查看详情>>

Rated air pressure

0.6 MPa

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
额定气压(Mpa) 0.6

Recommended workpiece mass

79 kg

Manufacturer specification

Configuration: LT-PG3-300A; Calculated with friction coefficient 0.1 and safety factor 2; robot acceleration is not considered. This is not an unrestricted dynamic payload rating.

LT-PG3-300A - 郑州领航机器人有限公司
建议工件重量(kg)① 79

Repeatability

0.05 mm

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
重复精度(mm) 0.05

Single-finger stroke

35 mm

Manufacturer specification

Configuration: LT-PG3-300A; Manufacturer specification for this exact model; additional test conditions are not specified.

LT-PG3-300A - 郑州领航机器人有限公司
单指行程(mm) 35

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.