Product details

HPS-TSJ058-70

Sensors & Perception

Hypersen Technology (Shenzhen) Co., Ltd.

HPS-TSJ058-70

About this product

HPS-TSJ058-70 is a joint torque sensor from Hypersen, listed for collaborative, humanoid, industrial and medical robots and AGV/AMR systems. Its parameter table lists a torque range of 70 N·m and the output configuration detailed in Specifications. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred. Technical claims remain bound to their individual table, family-card or drawing source. Cover image: Manufacturer reference illustration.

Model
HPS-TSJ058-70
Category
Sensors & Perception, Components

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Creep 30 minutes

≤±0.3 %F.S./30 min

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Creep interval is 30 minutes, as printed in the header.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
蠕变 (%F.S./30min) ≤±0.3

Drawing angular spacing

45°

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
45°

Drawing blind hole

Φ2.5 +0.01 0 4.5

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. Stacked tolerance values follow the diameter; the final standalone value is the adjacent depth callout. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ2.5 +0.01 0 4.5

Drawing bore diameter

Φ10 +0.018 0

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ10 +0.018 0

Drawing inner pitch circle

Φ27±0.1

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ27±0.1

Drawing inner step diameter

Φ33.5

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ33.5

Drawing inner threaded holes

8-M3 through

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
8-M3通孔

Drawing left axial step

4

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
4

Drawing locating through hole

Φ3 +0.012 0

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ3 +0.012 0

Drawing outer diameter

Φ58 0 -0.05

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ58 0 -0.05

Drawing outer mounting holes

8-Φ3.5 through

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
8-Φ3.5通孔

Drawing outer pitch circle

Φ49.5

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ49.5

Drawing register diameter

Φ43.5 0 -0.025

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ43.5 0 -0.025

Drawing right axial step

5

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
5

Drawing secondary pitch circle

Φ31.5

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page mechanical drawing; Literal callout from the mechanical drawing embedded by this exact product page. No explicit general linear-unit label is present, so no mm unit is inferred. Tolerances and fits are retained rather than converted to nominal-only dimensions. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
Φ31.5

Family card dimensions

φ50*7.5 mm

Manufacturer specification

Configuration: HPS-TSJ058-70; family card; Manufacturer family-card dimensional claim; the card uses mm. Diameter and axial thickness are shown in that order. The family card dimensions are diameter 50 by 7.5 mm, but the exact-page drawing prints outer diameter 58 and axial steps 4 and 5 without an explicit general drawing unit. Source applicability is unresolved. The sampling cell is a dash despite the output row naming RS485; no sampling rate is inferred.

Hypersen Chinese force-sensor family and model summary
HPS-TSJ058-70扭矩传感器量程为70Nm,产品尺寸为φ50*7.5mm,可承受150%过载。

Hysteresis

≤±0.3 %F.S.

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
滞后(%F.S.) ≤±0.3

Input resistance

700±5 Ω

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
输出/输入电阻(Ω) 750±50/700±5

Insulation resistance

≥5000 MΩ

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. At 50 V DC, as explicitly printed. M is the mega prefix in the Ω row; value is 5000 MΩ, not 5000 Ω.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
绝缘电阻(Ω) ≥5000M(50VDC)

Nonlinearity

≤±0.3 %F.S.

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
非线性(%F.S.) ≤±0.3

Operating temperature

-20~80 °C

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
工作温度(℃) -20~80

Output resistance

750±50 Ω

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Source row order is output resistance / input resistance. Applicability to the internal bridge versus external digital interface is unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
输出/输入电阻(Ω) 750±50/700±5

Output signal

1.8±3.6/RS485

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Output alternatives are printed under one named model; no separately named hardware-interface variants are inferred. Analog sensitivities retain mV/V; RS485 is an interface, not a mV/V value. The printed tolerance exceeds the nominal sensitivity; retained literally, without correction.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
输出信号(mV/V) 1.8±3.6/RS485

Repeatability

≤±0.3 %F.S.

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
重复性(%F.S.) ≤±0.3

Safe overload source limit

≤150 %F.S.

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source literally prints an upper-bound sign ≤150; it is not silently changed to a guaranteed minimum overload rating.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
安全过载(%F.S.) ≤150

Sampling rate status

Unspecified

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. The source lists RS485 but leaves the sampling-rate cell as a dash.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
采样频率(Hz) –

Sensitivity temperature coefficient

≤±0.3 %F.S./10 °C

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
灵敏度温度系数(( %F.S./10℃ )) ≤±0.3

Supply voltage

5~15 V DC

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
供电电压(V) DC 5~15

Torque measurement range

70 N·m

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
量程(Nm) 70

Zero output

≤±1 %F.S.

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
零点输出(%F.S.) ≤±1

Zero temperature coefficient

≤±0.1 %F.S./10 °C

Manufacturer specification

Configuration: HPS-TSJ058-70; exact-page parameter table; Manufacturer exact-product HTML parameter table; test environment, electronics revision and calibration method are unspecified. Per 10 °C temperature change; no ambient reference temperature is printed.

HPS-TSJ058-70 official technical page and embedded mechanical drawing
零点温度系数( %F.S./10℃ ) ≤±0.1

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.