Product details

Z-EFG-60-150

Grippers & End Effectors

HITBOT

Z-EFG-60-150

About this product

Z-EFG-60-150 is a HITBOT wide parallel electric gripper for robot handling. Its current page specifies a 60 mm adjustable stroke, 40–300 N gripping force and ±0.02 mm repeat positioning accuracy. RS-485 (Modbus RTU) and I/O provide control; its body weighs 1.7 kg. Its current page specifies IP40, while the linked manual specifies IP20; hardware revision applicability is unresolved. Cover image: Manufacturer reference illustration.

Model
Z-EFG-60-150
Category
Grippers & End Effectors, Components

Product family: Z-EFG Wide Electric Grippers

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Allowable load moment mx

58.5 N·m

Manufacturer specification

Configuration: Z-EFG-60-150; linked exact-model manual PDF page 3; Manufacturer load limits use the local jaw-load axis sketch; simultaneous combined loading is not specified.

HITBOT z efg 60 150 Product Manual
Fz: 250N Mx: My: Mz: 58.5 N·m 15 N·m 25.5 N·m

Allowable load moment my

15 N·m

Manufacturer specification

Configuration: Z-EFG-60-150; linked exact-model manual PDF page 3; Manufacturer load limits use the local jaw-load axis sketch; simultaneous combined loading is not specified.

HITBOT z efg 60 150 Product Manual
Fz: 250N Mx: My: Mz: 58.5 N·m 15 N·m 25.5 N·m

Allowable load moment mz

25.5 N·m

Manufacturer specification

Configuration: Z-EFG-60-150; linked exact-model manual PDF page 3; Manufacturer load limits use the local jaw-load axis sketch; simultaneous combined loading is not specified.

HITBOT z efg 60 150 Product Manual
Fz: 250N Mx: My: Mz: 58.5 N·m 15 N·m 25.5 N·m

Allowable vertical static load fz

250 N

Manufacturer specification

Configuration: Z-EFG-60-150; linked exact-model manual PDF page 3; Manufacturer load limits use the local jaw-load axis sketch; simultaneous combined loading is not specified.

HITBOT z efg 60 150 Product Manual
Fz: 250N Mx: My: Mz: 58.5 N·m 15 N·m 25.5 N·m

Base tapped mounting callout

8 × M5; associated token 6

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual drawing PDF page 4; Exact manual native drawing, PDF page 4. Thread designations and literal mounting tokens are retained. No general linear-unit heading is visible; no millimetre unit is inferred for unlabelled lengths. Repeated patterns across views are not added together.

HITBOT z efg 60 150 Product Manual
8 x M5 6

Body mass

1.7 kg

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
重量 1.7kg

Body tapped mounting callout

2 × M8; associated token 16

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual drawing PDF page 4; Exact manual native drawing, PDF page 4. Thread designations and literal mounting tokens are retained. No general linear-unit heading is visible; no millimetre unit is inferred for unlabelled lengths. Repeated patterns across views are not added together.

HITBOT z efg 60 150 Product Manual
2 x M8 16

Body through-hole callout

2 × Φ6.5 through; associated token Φ11

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual drawing PDF page 4; Exact manual native drawing, PDF page 4. Thread designations and literal mounting tokens are retained. No general linear-unit heading is visible; no millimetre unit is inferred for unlabelled lengths. Repeated patterns across views are not added together.

HITBOT z efg 60 150 Product Manual
2 x Φ6.5 通 Φ11

Cable conductor count

12

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
出线规格 线长2m,12芯线

Cable length

2 m

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
出线规格 线长2m,12芯线

Claimed cycle life

10,000,000 cycles

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 2; Manufacturer cycle-life claim; load, duty cycle and test method are not stated.

HITBOT z efg 60 150 Product Manual
千万次循环

Control interface

RS-485 (Modbus RTU), I/O

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
控制方式 485(Modbus RTU)、I/O

Controller integration

Integrated controller

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 2; Exact-model manufacturer feature.

HITBOT z efg 60 150 Product Manual
控制器内置

Default modbus address

1

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 5; Defaults for the Modbus version/configuration described by this exact manual; no separate interface SKU or protocol interoperability is inferred.

HITBOT z efg 60 150 Product Manual
04 电动夹爪Z-EFG-60-150 注意: 1.请在接线时务必确认电源线正负极正确,485通讯线与I/O线正确,由于接线错误导致烧毁不在正常保修范围内; 2.485与24V夹爪内部未隔离,如需要隔离需要客户使用其它设备进行隔离。 3.夹爪的地线必须与用户端控制器的485地线共地!! 4.上电工作过程中IO输出线缆请勿接触24V电源与IO输入线缆!! Z-EFG-60-150的RS485通讯使用Modbus RTU协议,支持功能码包括:0x03,0x06,0x10,默认通信参数如下 表: 线序说明 RS485通讯 ID 数据位 停止位 校验 1 8 1 无 波特率 115200 黑色 黄色 黄白色 棕白色 棕色 蓝色 灰色 GND 485+ 485- IN1 IN2 OUT1 OUT2 红色 24V+

Default serial baud rate

115,200 bit/s

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 5; Defaults for the Modbus version/configuration described by this exact manual; no separate interface SKU or protocol interoperability is inferred.

HITBOT z efg 60 150 Product Manual
04 电动夹爪Z-EFG-60-150 注意: 1.请在接线时务必确认电源线正负极正确,485通讯线与I/O线正确,由于接线错误导致烧毁不在正常保修范围内; 2.485与24V夹爪内部未隔离,如需要隔离需要客户使用其它设备进行隔离。 3.夹爪的地线必须与用户端控制器的485地线共地!! 4.上电工作过程中IO输出线缆请勿接触24V电源与IO输入线缆!! Z-EFG-60-150的RS485通讯使用Modbus RTU协议,支持功能码包括:0x03,0x06,0x10,默认通信参数如下 表: 线序说明 RS485通讯 ID 数据位 停止位 校验 1 8 1 无 波特率 115200 黑色 黄色 黄白色 棕白色 棕色 蓝色 灰色 GND 485+ 485- IN1 IN2 OUT1 OUT2 红色 24V+

Digital i/o active levels

NPN: 0 V; PNP: 24 V

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 11; NPN/PNP configuration as described in this manual; not synthetic distinct physical variants.

HITBOT z efg 60 150 Product Manual
NPN型有效为0V,PNP型有效为24V

Dimensions

140 × 47 × 112 mm

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model. Printed dimension order; axes are not explicitly labelled.

HITBOT z efg 60 150
尺寸规格 140*47*112mm

Finger tapped mounting callout

4 × M3; associated token 6

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual drawing PDF page 4; Exact manual native drawing, PDF page 4. Thread designations and literal mounting tokens are retained. No general linear-unit heading is visible; no millimetre unit is inferred for unlabelled lengths. Repeated patterns across views are not added together.

HITBOT z efg 60 150 Product Manual
4 x M3 6

Gripping-current command range

0.25~0.5 A

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 6; Protocol command range for the exact manual configuration; not an independently measured physical performance limit.

HITBOT z efg 60 150 Product Manual
单位 A,取值范围:0.25~0.5

Gripping force

40~300 N

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model. Adjustable.

HITBOT z efg 60 150
夹持力 40~300N(可调)

Gripping-speed command range

2~200 mm/s

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 6; Protocol command range for the exact manual configuration; not an independently measured physical performance limit.

HITBOT z efg 60 150 Product Manual
单位 mm/s,取值范围:2~200

Jaw motion

Two-finger parallel motion

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
运动方式 二指平动

Manual opening direction

Counterclockwise closes; clockwise opens

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual drawing PDF page 4; Exact manual native drawing, PDF page 4. Thread designations and literal mounting tokens are retained. No general linear-unit heading is visible; no millimetre unit is inferred for unlabelled lengths. Repeated patterns across views are not added together.

HITBOT z efg 60 150 Product Manual
手动一字开合位置(逆时针关,顺时针开)

Minimum one-way stroke time

0.6 s

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
单向行程运动最短时间 0.6s

Modbus address range

1–247

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 6; Configuration saved and restart required as described by the manual.

HITBOT z efg 60 150 Product Manual
取值范围 [1~247]

Modbus function codes

0x03, 0x06, 0x10

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 5; Defaults for the Modbus version/configuration described by this exact manual; no separate interface SKU or protocol interoperability is inferred.

HITBOT z efg 60 150 Product Manual
04 电动夹爪Z-EFG-60-150 注意: 1.请在接线时务必确认电源线正负极正确,485通讯线与I/O线正确,由于接线错误导致烧毁不在正常保修范围内; 2.485与24V夹爪内部未隔离,如需要隔离需要客户使用其它设备进行隔离。 3.夹爪的地线必须与用户端控制器的485地线共地!! 4.上电工作过程中IO输出线缆请勿接触24V电源与IO输入线缆!! Z-EFG-60-150的RS485通讯使用Modbus RTU协议,支持功能码包括:0x03,0x06,0x10,默认通信参数如下 表: 线序说明 RS485通讯 ID 数据位 停止位 校验 1 8 1 无 波特率 115200 黑色 黄色 黄白色 棕白色 棕色 蓝色 灰色 GND 485+ 485- IN1 IN2 OUT1 OUT2 红色 24V+

Motor type

Servo motor

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
电机类型 伺服电机

Operating humidity

35~80 %RH

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model. Non-frosting, as printed; no non-condensing equivalence is inferred.

HITBOT z efg 60 150
使用湿度范围 35~80%RH(不结霜)

Operating temperature

5~55 °C

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
使用温度范围 5~55℃

Operating voltage

24±10% V

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model. DC is explicit in this row.

HITBOT z efg 60 150
工作电压 DC24V±10%

Peak current

8 A

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
峰值电流 8A

Position command range

0~60 mm

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 6; Protocol command range for the exact manual configuration; not an independently measured physical performance limit.

HITBOT z efg 60 150 Product Manual
单位 mm,取值范围:0~60

Power

30 W

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
功率 30W

Power-off self-locking

Claimed

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 2; Manufacturer feature; holding force and permissible power-loss load are not specified.

HITBOT z efg 60 150 Product Manual
断电自锁

Protection rating

IP20

Manufacturer specification

Configuration: Z-EFG-60-150; linked exact-model manual PDF page 3; Exact linked-manual rating. Document revision is not proof of applicability to current-page hardware. The current page and linked manual give differing protection rating claims without a verified hardware-revision mapping; both remain source-qualified.

HITBOT z efg 60 150 Product Manual
易碎场景一(如试管) 易碎场景二(如鸡蛋) 凌乱摆放,零件的排序和选别 狭窄场景下的夹持 易变形场合(如圆环) 软接触高频率场合 医疗、新零售、3C行业等应用场合 应用场景图 规格参数 02 电动夹爪Z-EFG-60-150 垂直方向容许静负荷 负载允许力矩 Fz: 250N Mx: My: Mz: 58.5 N·m 15 N·m 25.5 N·m 说明项 参数 总行程 60mm(可调) 40~300N(可调) ±0.02mm ≤1.5kg 0.6s 伺服电机 丝杆+同步带+滚珠导轨 二指平动 1.7kg 140*47*112mm DC24V±10% 1A 8A IP20 30W 每六个月或者动作一百万次/回 5~55℃ 35~80%RH(不结霜) 夹持力 推荐夹持重量 单向行程运动最短时间 电机类型 传动方式 重量 运动方式 尺寸规格 工作电压 额定电流 峰值电流 功率 防护等级 运动元件油脂补给 使用温度范围 使用湿度范围 重复定位精度 Mx My Fz Mz

Protection rating

IP40

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model. The current page and linked manual give differing protection rating claims without a verified hardware-revision mapping; both remain source-qualified.

HITBOT z efg 60 150
防护等级 IP40

Rated current

1 A

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
额定电流 1A

Recommended gripping mass

≤1.5 kg

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model. Recommended handling mass; contact fixture, orientation and test method are not specified.

HITBOT z efg 60 150
推荐夹持 重量 ≤1.5kg

Relubrication interval

Every six months or one million operations

Manufacturer specification

Configuration: Z-EFG-60-150; linked exact-model manual PDF page 3; Exact-model maintenance interval; manufacturer does not state whichever-first semantics.

HITBOT z efg 60 150 Product Manual
每六个月或者动作一百万次/回

Repeat positioning accuracy

±0.02 mm

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
重复定位精度 ±0.02mm

Rs-485 to supply isolation

Not internally isolated

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 5; The exact manual states external isolation requires separate equipment; no galvanic isolation is claimed.

HITBOT z efg 60 150 Product Manual
04 电动夹爪Z-EFG-60-150 注意: 1.请在接线时务必确认电源线正负极正确,485通讯线与I/O线正确,由于接线错误导致烧毁不在正常保修范围内; 2.485与24V夹爪内部未隔离,如需要隔离需要客户使用其它设备进行隔离。 3.夹爪的地线必须与用户端控制器的485地线共地!! 4.上电工作过程中IO输出线缆请勿接触24V电源与IO输入线缆!! Z-EFG-60-150的RS485通讯使用Modbus RTU协议,支持功能码包括:0x03,0x06,0x10,默认通信参数如下 表: 线序说明 RS485通讯 ID 数据位 停止位 校验 1 8 1 无 波特率 115200 黑色 黄色 黄白色 棕白色 棕色 蓝色 灰色 GND 485+ 485- IN1 IN2 OUT1 OUT2 红色 24V+

Serial data bits

8 bits

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 5; Defaults for the Modbus version/configuration described by this exact manual; no separate interface SKU or protocol interoperability is inferred.

HITBOT z efg 60 150 Product Manual
04 电动夹爪Z-EFG-60-150 注意: 1.请在接线时务必确认电源线正负极正确,485通讯线与I/O线正确,由于接线错误导致烧毁不在正常保修范围内; 2.485与24V夹爪内部未隔离,如需要隔离需要客户使用其它设备进行隔离。 3.夹爪的地线必须与用户端控制器的485地线共地!! 4.上电工作过程中IO输出线缆请勿接触24V电源与IO输入线缆!! Z-EFG-60-150的RS485通讯使用Modbus RTU协议,支持功能码包括:0x03,0x06,0x10,默认通信参数如下 表: 线序说明 RS485通讯 ID 数据位 停止位 校验 1 8 1 无 波特率 115200 黑色 黄色 黄白色 棕白色 棕色 蓝色 灰色 GND 485+ 485- IN1 IN2 OUT1 OUT2 红色 24V+

Serial parity

None

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 5; Defaults for the Modbus version/configuration described by this exact manual; no separate interface SKU or protocol interoperability is inferred.

HITBOT z efg 60 150 Product Manual
04 电动夹爪Z-EFG-60-150 注意: 1.请在接线时务必确认电源线正负极正确,485通讯线与I/O线正确,由于接线错误导致烧毁不在正常保修范围内; 2.485与24V夹爪内部未隔离,如需要隔离需要客户使用其它设备进行隔离。 3.夹爪的地线必须与用户端控制器的485地线共地!! 4.上电工作过程中IO输出线缆请勿接触24V电源与IO输入线缆!! Z-EFG-60-150的RS485通讯使用Modbus RTU协议,支持功能码包括:0x03,0x06,0x10,默认通信参数如下 表: 线序说明 RS485通讯 ID 数据位 停止位 校验 1 8 1 无 波特率 115200 黑色 黄色 黄白色 棕白色 棕色 蓝色 灰色 GND 485+ 485- IN1 IN2 OUT1 OUT2 红色 24V+

Serial stop bits

1 bits

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 5; Defaults for the Modbus version/configuration described by this exact manual; no separate interface SKU or protocol interoperability is inferred.

HITBOT z efg 60 150 Product Manual
04 电动夹爪Z-EFG-60-150 注意: 1.请在接线时务必确认电源线正负极正确,485通讯线与I/O线正确,由于接线错误导致烧毁不在正常保修范围内; 2.485与24V夹爪内部未隔离,如需要隔离需要客户使用其它设备进行隔离。 3.夹爪的地线必须与用户端控制器的485地线共地!! 4.上电工作过程中IO输出线缆请勿接触24V电源与IO输入线缆!! Z-EFG-60-150的RS485通讯使用Modbus RTU协议,支持功能码包括:0x03,0x06,0x10,默认通信参数如下 表: 线序说明 RS485通讯 ID 数据位 停止位 校验 1 8 1 无 波特率 115200 黑色 黄色 黄白色 棕白色 棕色 蓝色 灰色 GND 485+ 485- IN1 IN2 OUT1 OUT2 红色 24V+

Stored gripping-position selection range

1-4

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 6; Protocol command range for the exact manual configuration; not an independently measured physical performance limit.

HITBOT z efg 60 150 Product Manual
选择通信触发的点位,取值范围:1-4

Supported serial baud rates

9600, 19200, 38400, 57600, 115200, 153600, 256000 bit/s

Manufacturer specification

Configuration: Z-EFG-60-150; linked manual PDF page 6; Only the literal enumerated baud rates are retained; document indexing is not used to invent omitted rates.

HITBOT z efg 60 150 Product Manual
0~6:9600,19200,38400,57600,115200, 153600,256000

Total stroke

60 mm

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model. Adjustable.

HITBOT z efg 60 150
总行程 60mm(可调)

Transmission mechanism

Lead screw + timing belt + ball guide

Manufacturer specification

Configuration: Z-EFG-60-150; current exact-model product page; Manufacturer claim for the exact named model.

HITBOT z efg 60 150
传动方式 丝杆+同步带+滚珠导轨

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.