Product details

RG75-300

Grippers & End Effectors

JODELL ROBOTICS

RG75-300

About this product

RG75-300 is a JODELL RG robot electric gripper for controlled workpiece gripping in automated equipment. It offers 0-75mm adjustable stroke and 40-300N gripping force per finger, with ±0.02mm position repeatability. Designed for robot-arm integration, it supports object-drop detection and power-loss holding. Recommended load depends on workpiece shape, contact friction and center of gravity. Fingers shown are optional and must be selected separately.

Model
RG75-300
Category
Grippers & End Effectors, Components

Product family: JODELL RG robot electric gripper family

Specifications & evidence

Source-backed claims. Configuration, workload and evidence type matter when comparing products.

Adjustable stroke

0-75 mm

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
可调行程 0-52mm 0-75mm

Body mass

1.5 kg

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
本体重量 0.75Kg 1.5Kg

Cable bending-radius relationship

15×OD

Manufacturer specification

Configuration: RG75-300; brochure drawing; Exact RG75-300 brochure PDF page 3 cable note for the illustrated reference configuration; other order cable lengths are not inferred. OD denotes cable outer diameter.

RG selection brochure
Bending Radius 15×OD;

Cable diameter

6.0±0.5 mm

Manufacturer specification

Configuration: RG75-300; brochure drawing; Exact RG75-300 brochure PDF page 3 cable note for the illustrated reference configuration; other order cable lengths are not inferred. OD denotes cable outer diameter.

RG selection brochure
Ø6.0±0.5mm In Diameter;

Cable length

0.2 m

Manufacturer specification

Configuration: RG75-300; brochure drawing; Exact RG75-300 brochure PDF page 3 cable note for the illustrated reference configuration; other order cable lengths are not inferred. OD denotes cable outer diameter.

RG selection brochure
0.2m In Length;

Communication protocol

Modbus RTU(RS 485)

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred. Any optional Digital I/O configuration is not assumed fitted and is not expanded into a separate physical product.

RG系列 机器人电动夹爪
通信协议 Modbus RTU(RS 485) Digital I/O Modbus RTU(RS 485)

Declared conformity

CE, RoHS

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred. Manufacturer declares CE/RoHS; no independent certificate validation is asserted.

RG系列 机器人电动夹爪
符合国际标准 CE、RoHS CE、RoHS

Drawing body-diameter callout

Ø75

Manufacturer specification

Configuration: RG75-300; brochure drawing; Exact RG75-300 brochure PDF page 3, shown reference configuration. Native drawing reviewed visually. Units are not printed beside these housing callouts or as a general drawing unit; values are retained as unit-unspecified callouts, not a complete envelope including fingers/cable.

RG selection brochure
Ø75

Drawing housing axial-span callout

131.50

Manufacturer specification

Configuration: RG75-300; brochure drawing; Exact RG75-300 brochure PDF page 3, shown reference configuration. Native drawing reviewed visually. Units are not printed beside these housing callouts or as a general drawing unit; values are retained as unit-unspecified callouts, not a complete envelope including fingers/cable.

RG selection brochure
131.50

Finger provision

Fingers shown must be selected separately

Manufacturer specification

Configuration: RG75-300; family brochure note; Manufacturer family selection-brochure note; the illustrated fingers are optional. Exact supplied accessories require the order configuration.

RG selection brochure
注:手指需选配

Gripping force per finger

40-300 N

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred. Force is per finger, not the sum of both fingers.

RG系列 机器人电动夹爪
单指夹持力 2-50N 40-300N

Ingress protection

IP65

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred. Use this exact-model table and stated enclosure option. Generic family IP65 badges and an IP67 video title do not establish every model enclosure rating.

RG系列 机器人电动夹爪
IP等级 IP54 IP65

Maximum current

1.5 A

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
最大电流 0.8A 1.5A

Maximum recommended payload

6 kg

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred. Starred recommended load depends on workpiece shape, contact-surface friction and center of gravity according to the linked family brochure; it is not an unconditional robot payload.

RG系列 机器人电动夹爪
*最大推荐负载 1Kg 6kg

Object-drop detection

Supported

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
掉落检测 支持 支持

Opening/closing time

0.55 s

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
打开/闭合时间 0.65s 0.55s

Operating environment

5~40°C, 85% RH or below °C / % RH

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
使用环境 5~40℃,85% RH以下 5~40℃,85% RH以下

Operating noise

<40 dB

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
运行噪音 <40dB <40dB

Permissible slider static moment mx

8 N·m

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred. Static slider moment, not actuator motor torque.

RG系列 机器人电动夹爪
滑块容许静力矩Mx 2.5N.m 8 N·m

Permissible slider static moment my

8 N·m

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred. Static slider moment, not actuator motor torque.

RG系列 机器人电动夹爪
滑块容许静力矩My 2N.m 8 N·m

Permissible slider static moment mz

8 N·m

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred. Static slider moment, not actuator motor torque.

RG系列 机器人电动夹爪
滑块容许静力矩Mz 2.8N.m 8 N·m

Permissible vertical static load fz

400 N

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
垂直方向容许静负载Fz 200N 400 N

Position repeatability

±0.02 mm

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
位置重复精度 ±0.02mm ±0.02mm

Power-loss holding

Supported

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
掉电保持 支持 支持

Rated current

0.55 A

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
额定电流 0.5A 0.55A

Rated supply voltage

DC 24±10% V

Manufacturer specification

Configuration: RG75-300; Manufacturer current RG series table, exact model column 2; captured 2026-10-28. Values are manufacturer claims, with no unprinted test condition inferred.

RG系列 机器人电动夹爪
额定电压 DC 24V±10% DC 24V±10%

Recommended-load applicability

Depends on workpiece shape, contact friction and workpiece center of gravity

Manufacturer specification

Configuration: RG75-300; family brochure load note; Manufacturer starred-load explanation. For EPG-HP50-050 the current page table carries the star and the linked family brochure supplies the general explanation; its26-050 dimensions are not copied.

RG selection brochure
*取决于抓取物体的形状及接触面的摩擦力,抓取物体的重心影响负载,如有疑问请联系我们。

Related products

Contact Us

If you have any questions or would like to get in touch, please feel free to reach out to us at the email below.

info@robotuo.com

YOUR CHOICES

Privacy settings

Choose each optional purpose. All are off until you agree. Change or withdraw consent at any time; browsing still works if you reject all.

Privacy preference

Remembers the choice you make here.

Always active

Save comparisons and followed companies and products between visits. Turning this off deletes saved selections; you can still use them during this visit.

Allow Google Analytics through Firebase to measure general page visits and usage with cookies and device information. Advertising remains off.

Allow OneSignal to process browser and subscription information for Robotuo news and updates. Browser permission is a separate step.

Your shortlist

0 companies selectedUp to 10

Your shortlist is empty. Browse companies and add the ones you’d like to connect with.